Best Abs Filament Under 20 (2026): 5 Picks Compared
Five 1 kg ABS filament spools compared by print temperature, diameter tolerance, spool design, warranty and the parts each listing says they suit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOVERTURE ABS White 1kg9.7/10View on Amazon - 2
Best Print SettingsSUNLU ABS Grey 1kg9.6/10View on Amazon - 3
Best for Outdoor Parts3DHoJor ABS White 1kg9.6/10View on Amazon - 4
White ABS, Low OdourPolymaker ABS White 1kg9.6/10View on Amazon - 5
Black ABSELEGOO ABS Black 1kg9.4/10View on Amazon
ABS is the filament to reach for when a print has to hold up: brackets, mounts, enclosures and parts that sit near heat or take a knock. It prints hotter than PLA, it can warp as it cools, and it rewards a printer with an enclosure and steady settings. This guide compares the best abs filament under 20, five spools picked from what each listing states about temperature, tolerance, spool design and warranty, so the choice comes down to the parts on the build plate.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OVERTURE ABS White 1kg: A 1 kg white spool with a 1-year warranty, a grid spool with a gauge and viewing hole, and a diameter tolerance of plus or minus 0.02 mm. Check price on Amazon
- Best Print Settings SUNLU ABS Grey 1kg: Full settings published: nozzle 250-260°C, bed 80-100°C, speed 40-60 mm/s, and a tolerance of plus or minus 0.02 mm. Check price on Amazon
- Best for Outdoor Parts 3DHoJor ABS White 1kg: Rated to 80°C with UV stability and waterproof properties, on a cardboard spool with a viewing window. Check price on Amazon
- White ABS, Low Odour Polymaker ABS White 1kg: A 1 kg white spool with low odour and a diameter tolerance of plus or minus 0.03 mm, from the title only. Check price on Amazon
- Black ABS ELEGOO ABS Black 1kg: A 1 kg black spool with strong layer adhesion named in the title, from the title only. Check price on Amazon
Machines on the list

OVERTURE ABS High Strength 3D Printer Filament
A 1 kg white ABS spool with a grid-layout spool, a glossy finish and a 1-year warranty, rated to a diameter tolerance of plus or minus 0.02 mm.
Pros
- Diameter tolerance of plus or minus 0.02 mm, checked with a CCD measuring system
- Grid-layout spool with a length and weight gauge, a viewing hole and a larger inner diameter
- Glossy finish straight off the bed, with less post-processing named by the maker
- 1-year warranty and a 1-year shelf life for unopened spools
Cons
- No print temperature or speed settings in the listing
- No safety features or certifications named
- Heat resistance is claimed but no temperature figure is stated
- No retraction or cooling guidance in the listing

SUNLU ABS Filament 1.75mm,Grey,1kg
A 1 kg grey ABS spool with full print settings published, a diameter tolerance of plus or minus 0.02 mm and a maker with more than 10 years of filament production.
Pros
- Full print settings stated: nozzle 250-260°C, bed 80-100°C, speed 40-60 mm/s
- Diameter tolerance of plus or minus 0.02 mm
- Retraction distance of 5 mm and retraction speed of 50 mm/s stated
- Larger inner diameter spool for easier unwinding
Cons
- Enclosure recommended during printing, so open printers need extra care
- No warranty term stated in the listing
- No safety features or certifications named
- No shelf life stated for unopened spools

3DHoJor ABS Filament 3D Printer Filament 1KG White
A 1 kg white ABS spool that the maker rates to 80°C with UV stability and waterproof properties, on a cardboard spool with a viewing window.
Pros
- Rated to withstand temperatures up to 80°C while keeping UV stability and waterproof properties
- Cardboard spool with a viewing window and a hard edge design
- Vacuum sealed with a desiccant bag to keep the filament dry
- Diameter tolerance of plus or minus 0.03 mm
Cons
- No print temperature or speed settings in the listing
- No warranty term stated in the listing
- No safety features or certifications named

Polymaker ABS Filament White 1KG 1.75mm
A 1.75mm white ABS spool with a 104°C Vicat softening temperature, plus-or-minus 0.03mm accuracy and full print guidance.
Pros
- Vicat softening temperature of 104°C for heat-resistant functional parts
- Full print guidance: nozzle 245 to 265°C, bed 90 to 100°C, cooling fan off
- Low odor from a specialty bulk-polymerized ABS resin
- Vacuum sealed with desiccant to protect the material from moisture
Cons
- No warranty term in the listing
- An enclosed printing chamber is recommended, mainly for larger parts
- If the spool absorbs moisture, drying takes 70°C for approximately 6 hours before printing
- Plus-or-minus 0.03mm accuracy, a wider figure than the plus-or-minus 0.02mm stated by FLASHFORGE and Creality

ELEGOO ABS 3D Printer Filament 1.75mm Black 1KG
A 1.75mm black ABS spool with strong layer adhesion, heat resistance up to 85°C and water resistance, built for enclosed FDM printers.
Pros
- Strong layer adhesion for functional parts
- Heat resistance up to 85°C, with water resistance
- Less-tangle winding and consistent feeding from a 1.75mm high-precision diameter
- Vacuum sealed to prevent moisture before use
Cons
- An enclosed printer is required, per the listing
- No warranty term in the listing
- No diameter accuracy figure is stated, only a 1.75mm diameter
- The listing title spells the spool as 'spooll'
Other machines to compare
Creality ABS Filament 1.75mmCheck price on Amazon
ELEGOO ABS 3D Printer Filament 1.75mm White 1KG Heat & ImpactCheck price on Amazon
Polymaker ABS Filament Teal 1KG 1.75mmCheck price on Amazon
Polymaker ABS Filament Lime 1KG 1.75mmCheck price on Amazon
Polymaker ABS Filament Natural 1KG 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Colour | Diameter tolerance | Print temperature | Spool | Warranty |
|---|---|---|---|---|---|---|
| OVERTURE ABS White 1kg | 9.7/10 | White | Plus or minus 0.02 mm | Not stated | Grid spool, gauge, viewing hole | 1-year |
| SUNLU ABS Grey 1kg | 9.6/10 | Grey | Plus or minus 0.02 mm | 250-260°C nozzle, 80-100°C bed | Larger inner diameter | Not stated |
| 3DHoJor ABS White 1kg | 9.6/10 | White | Plus or minus 0.03 mm | Not stated | Cardboard spool, viewing window | Not stated |
| Polymaker ABS White 1kg | 9.6/10 | White | Plus or minus 0.03 mm | Not stated | Not stated | Not stated |
| ELEGOO ABS Black 1kg | 9.4/10 | Black | Not stated | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026.
What the ABS listings tell you
Five ABS listings were read for this guide. Only 1 stated a warranty term, and none of the five named a safety certification. Two stated a diameter tolerance of plus or minus 0.02 mm, and two stated plus or minus 0.03 mm, with one listing silent on tolerance. Only 1 listing published full print settings, with nozzle and bed temperatures, print speed and retraction figures. Read the spool and settings details, not just the colour name.
Buying guide: the best abs filament under 20
Print temperature and bed temperature
Only the SUNLU listing publishes print settings: a nozzle temperature of 250-260°C, a bed temperature of 80-100°C, a print speed of 40-60 mm/s, a retraction distance of 5 mm and a retraction speed of 50 mm/s. The other listings state no temperatures or speeds, so their settings come from the printer profile, not the listing. Treat the SUNLU figures as the stated starting point for that spool, and check the listing again before changing materials.
Enclosure and warping
SUNLU recommends an enclosure during printing, because of the way ABS behaves as it cools. OVERTURE describes its filament as low warping, and 3DHoJor claims no layer separation or warping, with suitability for large objects with edges and corners. An enclosure keeps the air around the print warm and steady, which is the practical answer when a listing warns about warping.
Diameter tolerance
SUNLU and OVERTURE both state a diameter tolerance of plus or minus 0.02 mm, with OVERTURE naming a CCD measuring system behind the figure. 3DHoJor and Polymaker state plus or minus 0.03 mm. ELEGOO states no tolerance in the title, so there is nothing to compare for that spool. A tighter stated tolerance points to steadier extrusion, but it is one figure among several, and the spool design and stated settings matter as much.
Spool design and storage
OVERTURE gives the most spool detail: a grid layout for tangle management, a clear length and weight gauge, a viewing hole and a larger inner diameter for smoother feeding, plus a 1-year shelf life for unopened spools with proper storage. 3DHoJor ships its filament vacuum sealed with a desiccant bag, on a cardboard spool with a hard edge design and a viewing window. SUNLU notes a larger inner diameter that makes unwinding easier. ELEGOO and Polymaker state no spool details in the title, so their storage and feeding stay unconfirmed in the listing.
Colour and finish
White dominates this set: OVERTURE, 3DHoJor and Polymaker are white, SUNLU is grey and ELEGOO is black. OVERTURE is the only listing to describe a finish, a glossy surface straight off the bed that needs less post-processing, in the maker words. SUNLU offers multiple colour options, so the grey spool here is one choice among others the maker lists.
Print ABS with ventilation and an enclosure where the maker recommends one, keep loose filament away from the bed and the nozzle, and stay with the printer while it runs.
Project Match
Match the project to the spool whose listing describes it:
- Functional parts, prototypes and enclosures that need heat resistance: OVERTURE, for functional prototypes, automotive parts and enclosures, and SUNLU, for durable items and functional parts that need higher heat resistance.
- Outdoor parts such as solar lamp housings, folding furniture and garden accessories: 3DHoJor, rated to 80°C with UV stability and waterproof properties.
- Drone mounts and industrial parts: 3DHoJor, named for drone mounts and industrial parts.
- Parts where a glossy finish matters: OVERTURE, with a glossy surface straight off the bed.
- Black parts with strong layer adhesion: ELEGOO, with strong layer adhesion named in the title.
How the scores add up
Each spool is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. For ABS filament, performance points come from stated print settings and stated heat resistance, build points from diameter tolerance and spool design, and value points from what the listing states for the spool.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OVERTURE ABS White 1kg | 9.7 | 30 | 22 | 21 | n/a | 3 |
| SUNLU ABS Grey 1kg | 9.6 | 30 | 21 | 21 | n/a | 0 |
| 3DHoJor ABS White 1kg | 9.6 | 29 | 21 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What temperature should ABS filament print at?
The SUNLU listing states a nozzle temperature of 250-260°C, a bed temperature of 80-100°C and a print speed of 40-60 mm/s, with a retraction distance of 5 mm and a retraction speed of 50 mm/s. The other listings state no temperatures, so use the settings the SUNLU listing publishes as the stated reference for that spool and the printer profile for the rest.
Do you need an enclosure to print ABS?
SUNLU recommends an enclosure during printing. OVERTURE describes its filament as low warping and 3DHoJor claims no layer separation or warping, but neither listing says an enclosure is unnecessary, so an enclosure stays the safer setup for ABS.
What is ABS filament good for?
OVERTURE names functional prototypes, automotive parts and enclosures that need heat resistance and toughness. SUNLU names durable items and functional parts that need higher heat resistance. 3DHoJor names drone mounts, industrial parts and outdoor installations such as solar lamp housings, folding furniture and garden accessories.
How accurate is the diameter of ABS filament?
SUNLU and OVERTURE state a diameter tolerance of plus or minus 0.02 mm, and 3DHoJor and Polymaker state plus or minus 0.03 mm. ELEGOO states no tolerance in the title. All five spools are 1.75 mm filament for FDM printers.
How should ABS filament be stored?
OVERTURE states a 1-year shelf life for unopened spools with proper storage. 3DHoJor ships its filament vacuum sealed with a desiccant bag to keep it dry and keep out dust. Keep spools sealed and dry between prints, and check the viewing window or gauge before starting a long print.
Related: best ABS filament 1.75mm, best ABS filament for 3D printing, best ABS filament black and best red ABS filament. Also see best ABS wood filament. Also see best cream ABS filament. Also see best ABS filament green. Also see best ABS CF filament. Also see best high speed ABS filament. Also see best ABS filament glue. Also see best 3D printer filament for outdoor use. Also see best filament dryer for nylon. Also see best 3D printer bed adhesive. Also see best matte finish PETG filament under $20. Also see best TPU filament under 25.




