Best Abs Filament for 3D Printing (2026): 4 Picks for Functional Parts
Four ABS spools for 3D printing, compared on speed, heat rating, accuracy, ease of printing and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU High Speed ABS9.7/10View on Amazon - 2
Best for Large PrintseSUN ABS+ 1.75mm9.6/10View on Amazon - 3
Best for Indoor PrintingYXPOLYER Low Odor ABS+9.5/10View on Amazon - 4
Best Accuracy StatedComgrow ABS 1.75mm9.5/10View on Amazon
A bracket that holds up under heat, an enclosure that survives a hot car, a jig that takes a knock without cracking: those are the jobs that call for ABS instead of PLA. The best abs filament for 3d printing turns those parts out strong and heat resistant, and this guide compares the spools on what each listing states: speed, heat rating, accuracy, ease of printing and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU High Speed ABS: Rated to 350 mm/s with a stated heat deformation temperature of 91°C and full recommended settings. Check price on Amazon
- Best for Large Prints eSUN ABS+ 1.75mm: ABS+ with improved cracking and warping on large-size items, +/- 0.05 mm accuracy and 410 to 425 m of filament. Check price on Amazon
- Best for Indoor Printing YXPOLYER Low Odor ABS+: Low-odor ABS+ that prints at temperatures as low as 220°C, with AMS compatibility and the only stated warranty here, 1 year. Check price on Amazon
- Best Accuracy Stated Comgrow ABS 1.75mm: Dimensional accuracy of +/- 0.02 mm, the finest stated here, in a 1 kg yellow spool. Check price on Amazon
Machines on the list

SUNLU High Speed ABS 3D Printer Filament
A high speed black ABS spool rated to 350 mm/s, with a stated heat deformation temperature of 91°C, full recommended print settings and a neatly wound reusable spool.
Pros
- Rated to 350 mm/s, the highest speed stated here
- Heat deformation temperature of 91°C stated
- Nozzle 280-290°C, bed 90-100°C and speed 300-350 mm/s all stated
- Neatly wound spool with a stated 100% neat rate, plus vacuum packaging with desiccant
Cons
- No filament diameter stated in the listing
- No dimensional accuracy stated
- No warranty term stated
- No total filament length stated

eSUN ABS+ Filament 1.75mm
An enhanced ABS+ spool in black, 1.75 mm diameter with +/- 0.05 mm accuracy and 410 to 425 m of filament, made for large-size items with less cracking and warping.
Pros
- ABS+ with improved cracking and warping on large-size items
- Dimensional accuracy of +/- 0.05 mm stated
- Total length of 410-425 m stated
- Compatible with Bambu Lab, Voron, Raise3D, Prusa and Creality printers, per the listing
Cons
- No print speed stated
- No nozzle or bed temperature stated
- No heat deformation temperature stated
- No warranty term stated

YXPOLYER ABS Filament Low Odor ABS+ 3D Printing
A low-odor transparent blue ABS+ spool, 1.75 mm and 1 kg, that prints at temperatures as low as 220°C and up to 200 mm/s, with AMS compatibility and a stated 1 year warranty.
Pros
- Low-odor ABS for indoor printing, per the listing
- Prints at temperatures as low as 220°C
- AMS compatible for multi-color printing
- Stated 1 year warranty, the only warranty term here
Cons
- No dimensional accuracy stated
- No heat deformation temperature stated
- No total filament length stated
- Speed of up to 200 mm/s is lower than the SUNLU rating

Comgrow ABS Filament 1.75mm
A yellow ABS spool, 1.75 mm and 1 kg, with the finest stated accuracy here at +/- 0.02 mm, but a thin listing with no stated speeds or temperatures and a weight figure that conflicts with the title.
Pros
- Dimensional accuracy of +/- 0.02 mm, the finest stated here
- Heat resistant, with stated impact strength and toughness
- Multiple color options stated
- Warping guidance stated: heat bed, raft or brim, slower first layer
Cons
- No print speed stated
- No nozzle or bed temperature stated
- Large prints may warp in standard printers, per the listing
Other machines to compare
ELEGOO ABS 3D Printer Filament 1.75mm Black 1KG Strong LayerCheck price on Amazon
Polymaker ABS Filament White 1KG 1.75mmCheck price on Amazon
SUNLU ABS Filament 1.75mmCheck price on Amazon
SUNLU 4KG High Speed ABS FilamentCheck price on Amazon
SUNLU High Speed ABS FilamentCheck price on Amazon
SUNLU PC-ABS 3D Printing Filament 1.75mm 1KG BlackCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Spool | Rated speed | Nozzle temp | Accuracy | Warranty |
|---|---|---|---|---|---|---|---|
| SUNLU High Speed ABS | 9.7/10 | Not stated | 1 kg | 350 mm/s | 280-290°C | Not stated | None stated |
| eSUN ABS+ 1.75mm | 9.6/10 | 1.75 mm | 1 kg | Not stated | Not stated | +/- 0.05 mm | None stated |
| YXPOLYER Low Odor ABS+ | 9.5/10 | 1.75 mm | 1 kg | 200 mm/s | From 220°C | Not stated | 1 year |
| Comgrow ABS 1.75mm | 9.5/10 | 1.75 mm | 1 kg | Not stated | Not stated | +/- 0.02 mm | None stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 3 November 2026.
Not every ABS spool is the same ABS
A search for the best abs filament for 3d printing turns up standard ABS, enhanced ABS+ and high speed ABS, and the four spools here show the spread. SUNLU sells speed, eSUN sells an enhanced ABS+ for large parts, YXPOLYER sells low odor and easy printing, and Comgrow sells a standard ABS with a tight accuracy claim. The right pick depends on the part and the printer, not on the ABS label alone.
Buying guide: best abs filament for 3d printing
Speed and heat
Speed is the headline difference here. SUNLU rates its ABS to 350 mm/s, with recommended settings of a 280-290°C nozzle, a 90-100°C bed and 300-350 mm/s. YXPOLYER rates its ABS+ to 200 mm/s at temperatures as low as 220°C. eSUN and Comgrow state no speed. On heat, SUNLU states a heat deformation temperature of up to 91°C, while the other listings claim heat resistance without a number.
Accuracy and length
Comgrow states the finest accuracy, +/- 0.02 mm, and eSUN states +/- 0.05 mm. SUNLU and YXPOLYER state no accuracy figure. Only eSUN states a total length: 410-425 m on a 1 kg spool. Accuracy and length are the figures to check when a part must fit another part.
Ease of printing
ABS warps, and the listings handle that differently. eSUN states its ABS+ improves cracking and warping on large-size items. YXPOLYER states low warping with good bed adhesion and strong layer bonding, and prints at temperatures as low as 220°C. Comgrow states that 1.75 mm ABS needs a heat bed and a suitable printing surface, and suggests a raft or brim with a slower initial layer speed. SUNLU states a neatly wound spool at a 100% neat rate to reduce tangles and jams.
Drying and storage
SUNLU and eSUN state vacuum packaging with desiccant, which keeps dust and moisture off the filament before the spool is opened. YXPOLYER and Comgrow state no packaging. For the drying question, see the FAQ below.
ABS gives off a stronger odor than PLA while printing, per the Comgrow listing, so print in a ventilated space unless the listing for your spool promises low odor, as the YXPOLYER listing does. ABS filament is a 3D printing material, not a laser material, and this guide covers printing with it only.
Project Match
- Functional brackets and enclosures that see warmth: SUNLU High Speed ABS, with a stated heat deformation temperature of 91°C.
- Large-size parts where warping matters: eSUN ABS+, made for large-size items with less cracking and warping.
- Indoor printing at home, in a studio or a classroom: YXPOLYER Low Odor ABS+, stated low odor and beginner-friendly.
- Small parts where fit matters: Comgrow ABS, with the finest stated accuracy at +/- 0.02 mm.
- Industrial machinery parts and electronic appliances: eSUN ABS+ or Comgrow ABS, which both name those uses.
How the scores add up
Each spool is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU High Speed ABS | 9.7 | 32 | 21 | 21 | n/a | 0 |
| eSUN ABS+ 1.75mm | 9.6 | 30 | 21 | 21 | n/a | 0 |
| YXPOLYER Low Odor ABS+ | 9.5 | 26 | 19 | 19 | n/a | 2 |
| Comgrow ABS 1.75mm | 9.5 | 27 | 19 | 19 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
How to use ABS filament?
Start from the settings the listing states. SUNLU recommends a nozzle temperature of 280-290°C, a bed temperature of 90-100°C and a printing speed of 300-350 mm/s, while YXPOLYER prints at temperatures as low as 220°C. Comgrow states that 1.75 mm ABS needs a heat bed and a suitable printing surface, and suggests a raft or brim with a slower initial layer speed. YXPOLYER also states compatibility with Bambu Lab AMS multi-color systems.
Is ABS filament food safe?
None of the four listings here states that the filament is food safe. The listings name functional parts, prototypes, machinery parts and models as uses, and none names food contact. Treat food safety as not stated unless the listing for the spool you buy says so.
Do I need to dry ABS filament?
The listings here do not state a drying step. What two listings do state is vacuum packaging with desiccant, from SUNLU and eSUN, which protects the filament from humidity before the spool is opened. For drying guidance, see our how to dry filament guide.
Is ABS filament flexible?
The listings describe ABS as tough and impact resistant, not flexible. SUNLU and Comgrow state the filament withstands a certain amount of pressure without being easily deformed or broken. For a part that must bend, the listings here name no flexible grade.
Is ABS filament UV resistant?
None of the four listings here states UV resistance. The listings state heat resistance, toughness and wear resistance, but UV is not among the stated properties. If a part will sit in sunlight, check the listing for the spool you buy.
Related: best ABS filament black, best heat resistant 3D printer filament, best UV resistant filament, and the 3D printers hub. Also see our 3D printer filament types. Also see our how to dry filament.




