Best Matte Finish Petg Filament Under $20 (2026): 5 Picks Compared
Five matte PETG filaments under $20 compared by print speed, nozzle and bed temperature, diameter accuracy, spool size and warranty term.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU High Speed PETG9.7/10View on Amazon - 2
Best AccuracyIEMAI Matte PETG9.6/10View on Amazon - 3
Biggest SpoolJAYO Matte PETG9.6/10View on Amazon - 4
Best Pre-DriedInslogic PETG Pro9.6/10View on Amazon - 5
Best Virgin MaterialUJOY3D Matte PETG9.6/10View on Amazon
A shelf of matte black brackets, a set of cosplay props and a row of functional parts all need the same thing: a filament that prints dull, not shiny. The best matte finish petg filament under 20 is the spool that gives that flat, even surface without a glossy sheen. We compared five matte PETG filaments by print speed, nozzle and bed temperature, diameter accuracy, spool size and warranty, using only what each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU High Speed PETG: 30 to 600 mm/s, three nozzle temperature bands, 1-year warranty Check price on Amazon
- Best Accuracy IEMAI Matte PETG: ±0.02 mm accuracy, 30-day warranty, Bambu Lab AMS compatible Check price on Amazon
- Biggest Spool JAYO Matte PETG: 1.1 kg reusable spool, up to 600 mm/s, heat resistance to 70 C Check price on Amazon
- Best Pre-Dried Inslogic PETG Pro: Pre-dried, vacuum sealed, 30 to 600 mm/s, AMS compatible Check price on Amazon
- Best Virgin Material UJOY3D Matte PETG: 100% virgin raw material, 400 mm/s, frosted matte finish Check price on Amazon
Machines on the list

SUNLU High Speed PETG 3D Printer Filament 1.75mm
A high speed PETG filament in orange, 1.75 mm on a 1 kg spool, with a 30 to 600 mm/s print range and a matte finish.
Pros
- Print range of 30 to 600 mm/s with nozzle temperatures stated for each band
- 1-year manufacturer warranty stated
- Matte finish that reduces the glossy sheen, per the listing
- Bed temperature of 70 to 80 C stated
Cons
- Orange is the only color stated
- No diameter tolerance is stated
- No drying guidance is stated
- No spool type is stated, reusable or not

IEMAI Matte PETG Filament 1.75mm
A matte PETG filament in gray, 1.75 mm on a 1 kg spool, with ±0.02 mm accuracy, a low-gloss surface and a 30-day warranty.
Pros
- ±0.02 mm dimensional accuracy stated
- Drying, nozzle, bed and speed guidance all stated
- 30-day warranty with free returns or exchanges
- Bambu Lab AMS compatible with named printer series
Cons
- Speed capped at 150 mm/s, the lowest here
- 30-day warranty is the shortest term here
- Gray is the only color stated
- Drying takes 5 to 8 hours before printing

JAYO Black High Speed Matte PETG Filament 1.75mm
A black matte PETG filament, 1.75 mm on a 1.1 kg reusable spool, with speeds up to 600 mm/s and heat resistance to 70 C.
Pros
- 1.1 kg spool, the largest here
- Speeds up to 600 mm/s with heat resistance to 70 C
- Matte finish that conceals layer lines, per the listing
- Vacuum-sealed with desiccant
Cons
- No nozzle or bed temperature is stated
- No warranty term is stated
- Print time cut of up to 40% is the maker's claim, not a measured figure
- No diameter tolerance is stated

Inslogic Pre-Dried PETG Pro Filament 1.75mm
A pre-dried PETG Pro filament in black, 1.75 mm on a 1 kg spool, with ±0.02 mm accuracy and speeds of 30 to 600 mm/s.
Pros
- Speed range of 30 to 600 mm/s with nozzle and bed temperatures stated
- Pre-dried and vacuum sealed with desiccant
- Reusable spool fits SUNLU and Bambu Lab refills
- ±0.02 mm accuracy stated
Cons
- Warranty description of '1' states no unit or term
- No color range is stated beyond black
- No drying time is stated
- No heat resistance figure is stated

UJOY3D 1kg PETG Matte 3D Printer Filament 1.75mm
A matte PETG filament in black, 1.75 mm on a 1 kg spool, with ±0.03 mm accuracy, speeds up to 400 mm/s and 100% virgin raw material.
Pros
- 100% virgin raw material stated
- Frosted matte finish hides layer lines, per the listing
- Nozzle and bed temperatures stated, with 240 C for the first layer
- Vacuum sealed with desiccant
Cons
- Speed capped at 400 mm/s, below the 600 mm/s picks
- ±0.03 mm accuracy is the loosest here
- One bullet describes a glossy surface effect beside the matte claim
- No warranty term is stated
Other machines to compare
SUNLU High Speed PETG 3D Printer Filament 1.75mmCheck price on Amazon
Creality PETG Filament 1.75mmCheck price on Amazon
SUNLU PETG-CF 3D Printer Filament 1.75mmCheck price on Amazon
IEMAI Matte PETG Filament 1.75mmCheck price on Amazon
IEMAI Enhanced Matte PETG+HS Filament 1.75mm 1KG Black forCheck price on Amazon
Specs compared
| Model | HQ Score | Spool | Print speed | Nozzle temp | Bed temp | Warranty |
|---|---|---|---|---|---|---|
| SUNLU High Speed PETG | 9.7/10 | 1 kg | 30 to 600 mm/s | 230 to 270 C | 70 to 80 C | 1 year |
| IEMAI Matte PETG | 9.6/10 | 1 kg | Up to 150 mm/s | 230 to 270 C | 60 to 70 C | 30 days |
| JAYO Matte PETG | 9.6/10 | 1.1 kg | Up to 600 mm/s | Not stated | Not stated | Not stated |
| Inslogic PETG Pro | 9.6/10 | 1 kg | 30 to 600 mm/s | 230 to 260 C | 50 to 60 C | Not stated |
| UJOY3D Matte PETG | 9.6/10 | 1 kg | Up to 400 mm/s | 235 to 255 C | 75 to 80 C | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026.
What the PETG listings tell you
We read five matte PETG listings for this guide. Two stated a warranty term, and one listed a warranty description of “1” with no unit. One left out nozzle and bed temperatures, and one capped speed at 150 mm/s while the others reach 400 or 600 mm/s. Read the settings table, not just the title.
Buying guide: the best matte finish petg filament under 20
Print speed and nozzle temperature
Speed is the widest gap here. SUNLU, JAYO and Inslogic all state speeds up to 600 mm/s, UJOY3D states up to 400 mm/s and IEMAI states up to 150 mm/s. SUNLU is the only listing that gives nozzle temperatures for each speed band: 230 to 240 C at 50 to 100 mm/s, 240 to 255 C at 100 to 300 mm/s, and 255 to 270 C at 300 to 600 mm/s. IEMAI states 230 to 270 C, Inslogic states 230 to 260 C and UJOY3D states 235 to 255 C, while JAYO states no nozzle temperature at all. Match the temperature to the speed you print at, not to the highest number on the box.
Diameter accuracy
Diameter accuracy is stated by three of the five. IEMAI and Inslogic both state ±0.02 mm, and UJOY3D states ±0.03 mm, all on 1.75 mm filament. SUNLU and JAYO state no diameter tolerance. A tighter stated tolerance means steadier feeding and more even extrusion, per the listings, so a spool that states its tolerance gives you more to judge than one that does not.
Matte finish and layer lines
Every listing here claims a matte finish, but each describes it differently. SUNLU describes a soft, even matte effect that reduces the glossy sheen. JAYO describes a smooth, non-reflective surface that conceals layer lines. IEMAI describes a low-gloss surface with reduced visible layer lines. Inslogic describes a refined matte finish with low surface glare. UJOY3D describes a frosted matte finish that hides layer lines, though one of its bullets also describes a glossy surface effect, which sits oddly beside the matte claim in its title.
Spool size and storage
Four spools weigh 1 kg and one weighs 1.1 kg: the JAYO, which also states a reusable spool. Inslogic states a reusable spool that fits SUNLU and Bambu Lab refills. JAYO, Inslogic and UJOY3D all ship vacuum-sealed with desiccant, and Inslogic states its spool arrives pre-dried. IEMAI is the only listing that gives drying guidance, recommending 60 C for 5 to 8 hours before printing. Store any spool sealed with desiccant between prints.
Warranty
Only two listings state a warranty term. SUNLU states a 1-year manufacturer warranty and IEMAI states a 30-day warranty with free returns or exchanges. Inslogic lists a warranty description of “1” with no unit, so we do not count it as a stated term. JAYO and UJOY3D state no warranty at all. A stated term is worth more than a vague promise, so read the warranty line before you buy. See our matte finish petg filament guide for the wider field.
Dry damp filament before printing: IEMAI recommends 60 C for 5 to 8 hours. Store spools sealed with desiccant, as JAYO, Inslogic and UJOY3D ship them. Keep the print area ventilated while printing.
Project Match
- Functional parts that take bumps: SUNLU or JAYO, both state high impact strength and speeds up to 600 mm/s.
- Cosplay props and decorative models: IEMAI, which names cosplay props and decorative models in its listing.
- Display models with a flat finish: UJOY3D, with a frosted matte finish and 100% virgin raw material.
- Parts on Bambu Lab AMS: IEMAI or Inslogic, both state AMS compatibility.
- Fast prototypes: SUNLU, with a stated 30 to 600 mm/s range and temperature bands for each speed.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For filament, safety points come from stated certifications or handling guidance; none of the five states one, so every safety score is zero. Two listings state a warranty term: SUNLU at 1 year and IEMAI at 30 days.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU High Speed PETG | 9.7 | 32 | 21 | 21 | n/a | 2 |
| IEMAI Matte PETG | 9.6 | 30 | 21 | 20 | n/a | 1 |
| JAYO Matte PETG | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Inslogic PETG Pro | 9.6 | 30 | 21 | 20 | n/a | 0 |
| UJOY3D Matte PETG | 9.6 | 28 | 20 | 20 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.
FAQ: lasers and CNC
What nozzle temperature does matte PETG need?
SUNLU states 230 to 270 C by speed band, IEMAI states 230 to 270 C, Inslogic states 230 to 260 C and UJOY3D states 235 to 255 C. JAYO states no nozzle temperature.
How fast can matte PETG print?
SUNLU, JAYO and Inslogic state speeds up to 600 mm/s, UJOY3D states up to 400 mm/s and IEMAI states up to 150 mm/s. SUNLU also gives the nozzle temperature for each speed band.
What does ±0.02 mm accuracy mean?
It is the stated diameter tolerance on 1.75 mm filament. IEMAI and Inslogic state ±0.02 mm, UJOY3D states ±0.03 mm, and SUNLU and JAYO state no tolerance.
Do I need to dry matte PETG before printing?
IEMAI recommends drying at 60 C for 5 to 8 hours before printing. Inslogic states its spool arrives pre-dried and vacuum sealed, and JAYO and UJOY3D ship vacuum-sealed with desiccant.
Which of these filaments state a warranty?
SUNLU states a 1-year manufacturer warranty and IEMAI states a 30-day warranty with free returns or exchanges. Inslogic lists a warranty description of “1” with no unit, and JAYO and UJOY3D state no warranty.
Related: best matte finish petg filament, best matte black tpu filament, best dark red matte pla filament, best heat resistant 3d printer filament, the 3D printer hub and the FDM 3D printer hub.




