Best Abs Cf Filament (2026): 4 Picks for Strong Parts
4 black ABS-CF spools in 1.75mm compared by carbon fiber share, heat deflection, stated print settings and spool details.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallTINMORRY ABS-CF9.5/10View on Amazon - 2
Best for Stated SpecsCHCKX ABS-CF Black9.5/10View on Amazon - 3
Best for Heat ResistanceELEGOO ABS CF9.4/10View on Amazon - 4
Best for Low OdorSiraya Tech ABS-CF9.3/10View on Amazon
A bracket that holds its shape under load, a jig that survives a warm workshop, a drone part that stays light and stiff: those are the jobs that push makers from plain ABS toward carbon fiber ABS. The best abs cf filament keeps the printability of ABS and adds carbon fiber for rigidity, dimensional stability and heat resistance, so functional parts come off the printer closer to the shape the design called for. This guide compares black ABS-CF spools in the same diameter and spool size, and scores each one on the figures its listing actually states: carbon fiber share, heat deflection, stated print settings, spool details and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read the affiliate disclosure.
Quick picks
- Best Overall TINMORRY ABS-CF: Clear print settings, a stated dimensional accuracy of ±0.03mm, a matte finish and a ventilation warning in the listing. Check price on Amazon
- Best for Stated Specs CHCKX ABS-CF Black: A stated modulus of 4500 MPa, 10% carbon fiber, a reusable PC spool and a drying temperature of 70C. Check price on Amazon
- Best for Heat Resistance ELEGOO ABS CF: A heat deflection temperature of up to 99°C and a machinable finish for post-processing. Check price on Amazon
- Best for Low Odor Siraya Tech ABS-CF: 10% chopped carbon fiber with a low odor claim and a light build for drone and automotive parts. Check price on Amazon
Machines on the list

TINMORRY ABS-CF Carbon Fiber 3D Printer Filament
A 1.75mm ABS-CF spool in black, 1kg, with stated nozzle and bed temperatures, a print speed under 200 mm/s, a dimensional accuracy of ±0.03mm and a matte finish.
Pros
- Nozzle 260 - 280 ℃ and bed 90 - 100 ℃ stated in the listing
- Dimensional accuracy of ±0.03mm stated for complex structural models
- Vacuum-sealed spool with desiccant, 1kg/2.2lbs
- Matte carbon fiber texture with no post-processing needed for a professional look
Cons
- Printing emits odors, so the listing calls for ventilation with an exhaust fan
- Closed-type printer recommended, so open printers are a poor match

CHCKX ABS-CF Black Filament 10% Carbon Fiber ABS
A 1.75mm ABS-CF spool in black, 1kg, with 10% carbon fiber, a stated modulus of 4500 MPa, a reusable PC spool and a matte finish.
Pros
- 10% carbon fiber with a stated modulus of 4500 MPa
- Drying temperature of 70C and an enclosed chamber called for in the listing
- Reusable PC spool that resists deformation and lets the maker monitor filament use
- Heat and chemical resistant, per the listing
Cons
- The settings line prints the figures without clear spacing, so the nozzle range, the drying time and the nozzle size are hard to read
- No warranty term is stated in the listing

ELEGOO ABS CF Carbon fiber ABS Filament 1.75mm
A 1.75mm ABS-CF spool in black, 1kg, with a heat deflection temperature of up to 99°C, a semi-matte finish and a machinable surface for post-processing.
Pros
- Heat deflection temperature of up to 99°C stated
- Machinable after printing, for refining finished parts
- Lower warping and improved dimensional control than standard ABS, per the listing
- Semi-matte finish that softens layer lines with less post-processing
Cons
- No print temperatures, speed or drying guidance in the listing
- No warranty term is stated in the listing
- No stated carbon fiber share, so the reinforcement level is unclear
- No stated modulus or strength figure, so stiffness is claimed, not measured

Siraya Tech Fibreheart ABS-CF 3D Printer Filament
A 1.75mm ABS-CF spool in black, 1kg, with 10% chopped carbon fibers, a low odor claim and a light build aimed at drone, automotive and sporting goods parts.
Pros
- 10% chopped carbon fibers for structural reinforcement
- Low odor claim in the listing
- Heat and chemical resistant, per the listing
- Aimed at drone components, automotive parts and sporting goods where weight matters
Cons
- No print temperatures, speed or drying guidance in the listing
- No stated modulus, tolerance or heat deflection figure
- No warranty term is stated in the listing
- The claim about competitors using powdered recycled fiber is stated without evidence in the listing
Other machines to compare
Creality ABS Filament 1.75mmCheck price on Amazon
Siraya Tech Fibreheart ABS-GF 3D Printer FilamentCheck price on Amazon
ERYONE ABS FilamentCheck price on Amazon
ABS-CF Carbon Fiber Reinforced 3D Printer Filament 1.75mmCheck price on Amazon
YXPOLYER Carbon Fiber ABS Filament 1.75mm 1kg ABS-CF 3DCheck price on Amazon
FOXTRUDER Carbon Fiber ABS Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Carbon fiber | Diameter | Spool | Heat deflection | Modulus | Tolerance |
|---|---|---|---|---|---|---|---|
| TINMORRY ABS-CF | 9.5/10 | Carbon fiber reinforced | 1.75mm | 1kg | Not stated | Not stated | ±0.03mm |
| CHCKX ABS-CF Black | 9.5/10 | 10% carbon fiber | 1.75mm | 1kg | Not stated | 4500 MPa | Not stated |
| ELEGOO ABS CF | 9.4/10 | Carbon fiber reinforced | 1.75mm | 1kg | Up to 99°C | Not stated | Not stated |
| Siraya Tech ABS-CF | 9.3/10 | 10% chopped carbon fiber | 1.75mm | 1kg | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on November 2026. Heat deflection, modulus and tolerance appear only where a listing states them; a blank reads Not stated.
How the picks were scored
Each spool is scored on performance, build, value, safety and warranty, with the weights published in the method guide. A spec the listing does not publish scores nothing, and a warranty scores only where the listing states a concrete term. The tables show the raw totals behind each published score.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TINMORRY ABS-CF | 9.5 | 29 | 21 | 20 | 3 | 0 |
| CHCKX ABS-CF Black | 9.5 | 30 | 20 | 20 | 0 | 0 |
| ELEGOO ABS CF | 9.4 | 28 | 20 | 20 | 0 | 0 |
| Siraya Tech ABS-CF | 9.3 | 26 | 19 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
What the listings tell you, and what they leave out
Only one of the listings states a heat deflection temperature, and only two state a carbon fiber share. Two listings print nozzle and bed temperatures; the other two print no print settings at all. None of the 4 states a warranty term, and none states a safety certification. The gaps matter because ABS-CF prints in an enclosed chamber with a hardened nozzle, and a spool with no stated settings leaves the buyer to find them elsewhere.
Treat the spec tables with care. One spec table lists a color of Black 15 and a part number of 1.75, while another lists a size of ABS-CF/GF under a title that says ABS-CF. Where a title and a spec table disagree, this guide follows the title and the bullets.
Buying guide: choosing the best abs cf filament
Carbon fiber share
Two of the listings state 10% carbon fiber, and the other two name carbon fiber without a share. A stated share lets the buyer compare reinforcement directly; without one, the stiffness claim rests on the maker word alone.
Heat resistance
Only the ELEGOO listing states a heat deflection figure, up to 99°C. The other listings claim heat resistance without a figure, so a part that must hold its shape in a warm environment has only one stated number to lean on.
Print settings and drying
The TINMORRY listing states nozzle 260 – 280 ℃, bed 90 – 100 ℃ and a print speed under 200 mm/s, with a closed-type printer recommended. The CHCKX listing gives nozzle and bed temperature ranges, a print speed range, a drying temperature of 70C, an enclosed chamber and adhesive on the build plate, plus a hardened steel or carbide nozzle. The ELEGOO and Siraya Tech listings state no settings at all. For drying, the CHCKX listing calls for drying at 70C, and the TINMORRY spool ships vacuum-sealed with desiccant.
Spool and finish
Every spool here is a black 1.75mm spool in 1kg. The CHCKX spool is PC, reusable and detachable, with a size of 7.8 x 7.8 x 2.5 inches, while the TINMORRY spool ships vacuum-sealed with desiccant. Finishes run matte to semi-matte, with the ELEGOO spool offering a semi-matte surface that softens layer lines.
What ABS-CF will not do
Carbon fiber adds rigidity, not flexibility, so none of these spools suits a part that must bend and spring back. No listing here states food-safe use or UV resistance, so do not assume either. Treat every spool as a stiff functional material, not a flexible or outdoor-rated one, unless a listing states otherwise.
ABS-CF printing gives off odors. The TINMORRY listing calls for adequate ventilation, preferably with an exhaust fan, and a closed-type printer. Print in a ventilated space, and follow the ventilation guidance in the listing.
Project Match
- Functional parts and mechanical components: ELEGOO ABS CF and TINMORRY ABS-CF, both aimed at load-bearing parts and jigs.
- Drone components, automotive parts and sporting goods: Siraya Tech ABS-CF, which names those uses and stresses a light build.
- Prototypes with a matte finish: CHCKX ABS-CF Black and TINMORRY ABS-CF, both with a stated matte surface.
- Industrial end-use components: TINMORRY ABS-CF, which names jigs, fixtures and industrial end-use components.
- Parts that need post-processing: ELEGOO ABS CF, which stays machinable after printing.
FAQ: lasers and CNC
How do I use ABS filament?
Print it in an enclosed chamber with adhesive on the build plate and a hardened steel or carbide nozzle, per the CHCKX listing. The TINMORRY listing states nozzle 260 – 280 ℃, bed 90 – 100 ℃ and a print speed under 200 mm/s, with a closed-type printer recommended. Dry the spool first where the listing calls for it; CHCKX gives a drying temperature of 70C.
Is ABS filament food safe?
None of the 4 listings states food-safe use, so do not treat any of these spools as food safe. A listing that means food contact states it plainly, and none here does.
Do I need to dry ABS filament?
Yes, where the listing calls for it. The CHCKX listing calls for drying at 70C, and the TINMORRY spool ships vacuum-sealed with desiccant, which keeps moisture out until the seal is opened. Store an opened spool dry and follow the drying guidance in the listing.
Is ABS filament flexible?
No. The listings here stress rigidity, stiffness and higher tensile strength, and carbon fiber is added to make parts hold their shape under load. A part that must bend and spring back calls for a flexible filament, not ABS-CF.
Is ABS filament UV resistant?
Not stated. None of the 4 listings claims UV resistance, so do not assume outdoor durability from any spool here. A part that lives outdoors needs a listing that states UV resistance plainly.
Related: the 3D printers hub, filament types, ABS vs ASA filament, filament for strength, and filament dryer boxes.




