Best Abs Filament Glue (2026): 5 Compared
5 glues for ABS filament compared by type, size, set time, drying, and safety, for bed adhesion and part bonding in 3D printing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallELEGOO 2 x 60 mL9.7/10View on Amazon - 2
Best Super GlueAmzuboca 25 g9.6/10View on Amazon - 3
Best PrecisionELEGOO 50 mL9.6/10View on Amazon - 4
Best 6-PackGIANTARM 6-Pack9.6/10View on Amazon - 5
Best StickCreality 21 g9.6/10View on Amazon
ABS prints lift off the bed and split along layer lines, and the best abs filament glue is the glue that holds the first layer down or bonds parts after the print. A glue stick coats the bed before printing, and a super glue joins parts after printing. This guide compares the glues in the list by type, size, set time and stated safety, using only what each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall ELEGOO 2 x 60 mL: 2 x 60 mL, low-odor, water-soluble Check price on Amazon
- Best Super Glue Amzuboca 25 g: 25 g, brush and nozzle, sets in 15 s Check price on Amazon
- Best Precision ELEGOO 50 mL: 50 mL, 10-30 s bonding, low bloom Check price on Amazon
- Best 6-Pack GIANTARM 6-Pack: 6 x 36 g sticks, lasts 100+ prints Check price on Amazon
- Best Stick Creality 21 g: 21 g stick, PVP, low odor Check price on Amazon
Machines on the list

ELEGOO 3D Printer Adhesive Glue (2 x 60mL)
3D printer adhesive glue, 2 x 60 mL, for ABS, PLA, PETG and TPU, with a low-odor water-soluble formula for PEI, PEO, PET and aluminum build plates.
Pros
- 2 x 60 mL, 58 g each
- Low-odor, water-soluble formula
- Works on PEI, PEO, PET and aluminum plates
- Reduces warping for ABS, PLA, PETG and TPU
Cons
- No warranty term is stated
- No set time is stated
- No brush or nozzle is stated
- Only a 2-bottle pack is stated

3D Printer Glue with Brush
3D printer super glue, 25 g, with a brush and nozzle, that sets in 15 seconds and bonds PLA, ABS, PETG and resin.
Pros
- Brush and nozzle in one bottle
- Sets in 15 seconds, full strength in 3 hours
- Clear formula dries invisible
- Bonds PLA, ABS, PETG and resin
Cons
- No warranty term is stated
- Adult use only, keep away from children
- Only 25 g in the bottle
- No 60 mL size is stated

ELEGOO 3D Printer Super Glue 50 ml for PLA ABS
3D printer super glue, 50 mL, for PLA, ABS, PETG and resin, with a low-bloom clear finish and a precision applicator.
Pros
- Bonds in 10-30 seconds at room temperature
- Low-bloom, clear finish
- Precision applicator for detailed repairs
- Full strength within 24 hours
Cons
- No warranty term is stated
- Only 50 mL in the bottle
- No brush is stated
- No 2-bottle pack is stated

3D Printer Glue Sticks, 36 Grams Each PVP Solid
3D printer glue sticks, 6 x 36 g, PVP, washable and non-toxic, that last for 100+ prints and reduce warping for PLA, ABS, PETG, HIPS and TPU.
Pros
- 6 x 36 g sticks in the pack
- Lasts for 100+ prints
- Non-toxic and acid-free PVP
- Water-soluble, easy to clean with water
Cons
- No warranty term is stated
- No set time is stated
- No brush or nozzle is stated
- Only a 6-pack is stated

Creality 3D Printer Glue Sticks PVP Solid Glue
3D printer glue stick, 21 g, PVP, with low odor, that improves bed adhesion and reduces warping for PLA, ABS, PETG, TPU, PC and PA.
Pros
- PVP material with low odor
- Easy to clean with water
- Works on PLA, ABS, PETG, TPU, PC and PA
- Lid keeps the stick from drying out
Cons
- No warranty term is stated
- Only 21 g in the pack
- No set time is stated
- No 6-pack option is stated
Other machines to compare
3DTOOLS Bamboo lab Original 3D Printer Adhesive Glue AviodCheck price on Amazon
3D Printing Super Glue Ultra Liquid 1.75 ozCheck price on Amazon
Creality 3D Printer Glue Sticks PVP Solid Glue Sticks for 3DCheck price on Amazon
TEQStone 3D Printer Glue Stick 6 PackCheck price on Amazon
Original Bamboo Lab All-in-One 3D Printer Adhesive GlueCheck price on Amazon
Specs compared
| Glue | Shop Score | Size | Set Time | Warranty |
|---|---|---|---|---|
| ELEGOO 2 x 60 mL | 9.7/10 | 2 x 60 mL | Not stated | Not stated |
| Amzuboca 25 g | 9.6/10 | 25 g | 15 s | Not stated |
| ELEGOO 50 mL | 9.6/10 | 50 mL | 10-30 s | Not stated |
| GIANTARM 6-Pack | 9.6/10 | 6 x 36 g | Not stated | Not stated |
| Creality 21 g | 9.6/10 | 21 g | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. None of the glues in this guide state a warranty term.
What the listings tell you, and what they leave out
We read 5 glues for this guide. Two are glue sticks for the build plate, and 3 are super glues for joining parts after printing. Two are ELEGOO glues, and one is a 6-pack of glue sticks. None of the 5 glues state a warranty term, and none of the glue sticks state a set time.
How to choose the best abs filament glue
Glue stick or super glue
Match the glue to the job. The Creality stick and the GIANTARM sticks coat the build plate before printing to reduce warping. The Amzuboca glue and the ELEGOO super glue bond parts after printing, and the ELEGOO adhesive glue coats the build plate for ABS, PLA, PETG and TPU.
Size
Check the size. The ELEGOO adhesive glue is 2 x 60 mL, and the ELEGOO super glue is 50 mL. The Amzuboca glue is 25 g, the Creality stick is 21 g, and each GIANTARM stick is 36 g, with 6 sticks in the pack.
Set time
Check the set time. The Amzuboca glue sets in 15 seconds and reaches full strength within 3 hours. The ELEGOO super glue bonds in 10-30 seconds at room temperature and reaches full strength within 24 hours. The glue sticks state no set time, so check the listing for application notes.
Clean up
Check the clean up. The Creality stick and the GIANTARM sticks clean with water after the build plate cools down. The ELEGOO adhesive glue is water-soluble, so wipe with a damp cloth to remove residue. The Amzuboca glue dries clear with no white haze, and the ELEGOO super glue has a low-bloom clear finish.
Safety
Check the safety notes. The Creality stick is made of PVP material with low odor during printing. The GIANTARM sticks are non-toxic and acid-free, with no unpleasant fumes when heated. The ELEGOO adhesive glue has a low-odor formula, and the Amzuboca glue is for adult use only, with a note to keep it away from children and use it in well-ventilated areas.
For the rest of the print bench, see our best ABS filament green and best 3D filament for strength.
Project Match
- Bed adhesion before printing: the Creality stick, with a 21 g PVP glue stick.
- Bonding parts after printing: the Amzuboca glue, with a brush and nozzle in 25 g.
- Two bottles for the build plate: the ELEGOO adhesive glue, with 2 x 60 mL.
- Detailed repairs: the ELEGOO super glue, with a precision applicator in 50 mL.
- Many prints from one pack: the GIANTARM sticks, with 6 x 36 g sticks for 100+ prints.
How the scores add up
Each glue is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For glue, safety points come from stated low-odor formulas, non-toxic material and use warnings.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ELEGOO 2 x 60 mL | 9.7 | 33 | 22 | 22 | 4 | 0 |
| Amzuboca 25 g | 9.6 | 32 | 22 | 21 | 4 | 0 |
| ELEGOO 50 mL | 9.6 | 32 | 21 | 21 | 4 | 0 |
| GIANTARM 6-Pack | 9.6 | 30 | 22 | 21 | 4 | 0 |
| Creality 21 g | 9.6 | 30 | 21 | 21 | 4 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What glue is best for ABS filament?
It depends on the job. For bed adhesion, the Creality stick and the GIANTARM sticks coat the build plate to reduce warping. For joining parts after printing, the Amzuboca glue and the ELEGOO super glue bond PLA, ABS, PETG and resin.
Does glue stick stop ABS warping?
The listings state that glue sticks improve bed adhesion and reduce warping. The Creality stick states stronger adhesion to the build plate, and the GIANTARM sticks state a high viscosity formula to prevent warping or shifting.
How fast does 3D printer super glue set?
It depends on the glue. The Amzuboca glue sets in 15 seconds and reaches full strength within 3 hours. The ELEGOO super glue bonds in 10-30 seconds at room temperature and reaches full strength within 24 hours.
How do I clean glue off the build plate?
It depends on the glue. The Creality stick and the GIANTARM sticks clean with water after the build plate cools down. The ELEGOO adhesive glue is water-soluble, so wipe with a damp cloth to remove residue.
Is 3D printer glue safe to use?
Check the safety notes on each listing. The Creality stick is made of PVP material with low odor, and the GIANTARM sticks are non-toxic and acid-free. The Amzuboca glue is for adult use only, with a note to keep it away from children and use it in well-ventilated areas.
More laser and CNC guides
More from the 3D printing shelf: best light green PLA filament, silica gel vs filament dryer, 3D printers.




