ABS Filament Cost: What to Expect per Spool
ABS filament cost follows bundle size, spool count and colour range, so compare the material in the bundle before you order.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Polymaker ABS Filament Bundle Black*4 4KG 1.75mm9.6/10View on Amazon - 2
SUNLU ABS Filament 1.75mm,8 Colors,250g*89.6/10View on Amazon - 3
YUANEANG ABS 3D Printer Filament 1.75mm9.6/10View on Amazon
A maker planning brackets, housings or replacement parts in ABS wants to know what a spool costs before ordering more material. ABS filament cost has no fixed figure: it follows the size of the bundle and how many spools and colours it holds, while the print settings decide whether the material runs well on your printer. This guide explains what sets the cost, then compares ABS bundles for FDM printers so you can match the material to the job.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Polymaker ABS Filament Bundle Black*4 4KG 1.75mm
A 4kg bundle of black ABS in 1.75mm, rated with a Vicat softening temperature of 104°C and a diameter accuracy of +/- 0.03mm.
Pros
- Vicat softening temperature of 104°C for parts that face elevated temperatures
- 4kg bundle of black ABS in 1.75mm for functional prints
- Low-odor resin with lower volatile content than traditional ABS resins
- Print settings stated: nozzle 245-265°C, bed 90-100°C, cooling fan off
Cons
- Black only: no colour choice in this bundle
- No warranty term is stated
- The maker recommends an enclosed chamber for stable printing
- Damp filament needs drying at 70°C for approximately 6 hours

SUNLU ABS Filament 1.75mm,8 Colors,250g*8
An 8-colour ABS bundle of 250g spools in 1.75mm, with a diameter tolerance of +/- 0.02 mm and print settings stated for FDM printers.
Pros
- 8 colours in 250g spools to match project needs
- Diameter tolerance of +/- 0.02 mm
- Print settings stated: nozzle 250-260°C, bed 80-100°C, speed 40-60mm/s
- Compatible with most FDM 3D printers that use 1.75mm filament
Cons
- 250g spools hold less material per spool than the YUANEANG bundle's 1kg spools
- No warranty term is stated
- Enclosure recommended during printing
- No drying guidance is stated

YUANEANG ABS 3D Printer Filament 1.75mm
A 10-colour ABS bundle with 1kg spools in 1.75mm, for functional parts, engineering models and mechanical prints.
Pros
- 10 colours in 1kg spools: Black, White, Gray, Red, Blue, Gold, Purple, Orange, Green and Brown
- Print settings stated: nozzle 230-250°C, bed 80-110°C, enclosure recommended
- Matte surface finish that supports sanding, smoothing and painting
- Compatible with Bambu Lab, Prusa, Ender/Creality, Anycubic, Elegoo and Sovol
Cons
- No diameter tolerance is stated
- No drying guidance is stated
- Ten 1kg spools take more storage space than a smaller bundle
- No Vicat softening temperature is stated
What Decides ABS Filament Cost
Bundle size leads the cost question. The Polymaker bundle is 4kg of black ABS, the SUNLU bundle holds 8 spools of 250g in 8 colours, and the YUANEANG bundle holds 10 spools of 1kg each in 10 colours. A bundle with more material and more colours covers more prints before you reorder, and a bundle with one colour suits a maker who prints the same part again and again.
Print settings do not set the cost, but they decide whether the bundle runs well on your printer. The Polymaker listing states a nozzle temperature of 245-265°C and a bed temperature of 90-100°C, the SUNLU listing states 250-260°C and 80-100°C, and the YUANEANG listing states 230-250°C and 80-110°C. All three makers recommend an enclosed chamber, which keeps the print environment stable and helps reduce warping. All three bundles use 1.75mm filament; our guide to filament thickness explains which size to buy.
How to Compare ABS Bundles
Start with the bundle, not the spool. Compare total weight, spool count and colour count across the listings, then check diameter tolerance: the Polymaker listing states +/- 0.03mm and the SUNLU listing states +/- 0.02 mm, while the YUANEANG listing states no tolerance. A tighter tolerance means more consistent extrusion, so weigh it against the colours and spool sizes you need.
Then check the extras the listing states. The Polymaker filament is vacuum sealed with desiccant, and damp filament dries at 70°C for approximately 6 hours. The SUNLU bundle adds a larger spool inner diameter for easier unwinding, and the YUANEANG bundle lists a matte surface that supports sanding, smoothing and painting. For drying gear, see our best filament dryer for Bambu guide.
ABS Filament Bundles for Functional Prints
The bundles below handle the measuring step in this guide: each one states its bundle size, colours and print settings, so you can match the material to the parts you print.
FAQ: lasers and CNC
How much ABS filament is in a bundle?
It depends on the bundle. The Polymaker bundle is 4kg of black ABS, the SUNLU bundle holds 8 spools of 250g in 8 colours, and the YUANEANG bundle holds 10 spools of 1kg each in 10 colours. Compare the bundle size before you compare anything else.
What print settings does ABS need?
The Polymaker listing states a nozzle temperature of 245-265°C and a bed temperature of 90-100°C with the cooling fan turned off. The SUNLU listing states 250-260°C and 80-100°C, and the YUANEANG listing states 230-250°C and 80-110°C. All three makers recommend an enclosed chamber.
Does ABS filament need drying?
The Polymaker listing says to dry damp filament at 70°C for approximately 6 hours. The SUNLU and YUANEANG listings state no drying guidance. The Polymaker filament arrives vacuum sealed with desiccant.
What is ABS filament good for?
The makers list functional prototypes, mechanical parts, robotics, tools, fixtures and replacement parts for the Polymaker filament, and brackets, housings, mechanical components, frames and replacement parts for the YUANEANG filament. The SUNLU filament suits durable items and functional parts that need higher heat resistance.
Can I laser engrave ABS filament prints?
No. Never laser ABS: it can release harmful fumes and damage the machine. Print ABS parts on an FDM printer instead; the YUANEANG bundle’s matte surface supports sanding, smoothing and painting.
Related: the toughest 3D printer filament guide, how to improve 3D print quality and best 3D printer stand with filament storage.




