Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best ABS Filament Black (2026): 5 Picks for Functional Parts

Five black ABS filaments for functional parts, compared by spool size, diameter, tolerance, heat resistance and print settings, with the 2KG bundles and the high-speed pick called out.

Best ABS Filament Black (2026): 5 Picks for Functional Parts
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Polymaker ABS 2KGBest OverallPolymaker ABS 2KG9.7/10View on Amazon
  2. 2ELEGOO ABS Black 2KGBest 2KG ValueELEGOO ABS Black 2KG9.6/10View on Amazon
  3. 3Bambu Lab ABS 1kgBest for AMSBambu Lab ABS 1kg9.6/10View on Amazon
  4. 4IEMAI ABS Black 1kgBest High SpeedIEMAI ABS Black 1kg9.5/10View on Amazon

A drone mount that flexes instead of cracking, or a tool holder that survives a hot car, is the kind of part that calls for ABS. PLA softens in heat, and a brittle print snaps on the first drop. The best abs filament black is the spool that prints strong, heat-resistant parts in a deep black, with tight diameter control and low warp. This guide compares black ABS filaments by spool size, diameter, tolerance, heat resistance and print settings, using only what each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Polymaker ABS 2KG: 2KG bundle with Vicat 104°C, low odor, +/- 0.03 mm accuracy and stated print settings Check price on Amazon
  • Best 2KG Value ELEGOO ABS Black 2KG: 2KG of black ABS with heat resistance up to 85°C, vacuum sealed, for enclosed printers Check price on Amazon
  • Best for AMS Bambu Lab ABS 1kg: 1kg refill with +/- 0.03 mm tolerance, low warp, and acetone smoothing for finished parts Check price on Amazon
  • Best High Speed IEMAI ABS Black 1kg: 1KG ABS rated up to 230 mm/s with low odor and a stated 270°C nozzle setting Check price on Amazon

Machines on the list

Polymaker ABS Filament Bundle Black*2 2KG 1.75mm

Polymaker ABS Filament Bundle Black*2 2KG 1.75mm

Polymaker9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

2KG bundle of black ABS filament, 1.75 mm, with Vicat 104°C, low odor and +/- 0.03 mm accuracy, for functional parts.

Pros

  • Vicat softening temperature of 104°C for heat-resistant parts
  • Low-odor formula with minimal odor during printing, per the maker
  • Stated print settings: nozzle 245-265°C, bed 90-100°C, fan off
  • Vacuum sealed with desiccant, with drying guidance at 70°C for 6 hours

Cons

  • No warranty term is stated
  • No safety listing is stated
  • Enclosed chamber recommended, so an open printer needs a change of setup
  • Nozzle and bed temperatures are given as ranges, not single settings
ELEGOO ABS 3D Printer Filament 1.75mm Black 2KG

ELEGOO ABS 3D Printer Filament 1.75mm Black 2KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

2KG of black ABS filament, 1.75 mm, with heat resistance up to 85°C and strong layer adhesion, for enclosed printers.

Pros

  • Heat resistant up to 85°C for functional parts
  • Impact resistant and tough, per the maker
  • 2KG in two 1kg spools, vacuum sealed
  • Less-tangle winding with full mechanical winding and manual inspection

Cons

  • No diameter tolerance is stated
  • No print settings are stated
  • Requires an enclosed printer
  • No warranty term is stated
Bambu Lab ABS Filament Black 1kg Refill

Bambu Lab ABS Filament Black 1kg Refill

Bambu Lab9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1kg refill of black ABS filament, 1.75 mm, with +/- 0.03 mm tolerance and low warp, for AMS and FDM printers.

Pros

  • Tight diameter control at 1.75 mm with +/- 0.03 mm tolerance
  • Low warp, with improved layer adhesion in an enclosed chamber
  • Can be sanded, drilled, painted or acetone-smoothed
  • 1kg refill for AMS and most FDM 3D printers

Cons

  • No heat resistance figure is stated
  • No print settings are stated
  • No warranty term is stated
JAYO ABS 3D Printer Filament 1.75mm Black

JAYO ABS 3D Printer Filament 1.75mm Black

JAYO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1kg spool of black ABS filament, 1.75 mm, with +/- 0.03 mm accuracy and high toughness, for most FDM printers.

Pros

  • Tight tolerance of +/- 0.03 mm on the 1.75 mm diameter
  • High strength and toughness for mechanical parts and prototypes
  • Vacuum sealed with desiccant, neatly wound
  • Works with most FDM printers with a heated bed and enclosed chamber

Cons

  • No heat resistance figure is stated
  • No print settings are stated
  • Needs a heated bed and enclosed chamber
  • No warranty term is stated
IEMAI ABS Filament 1.75mm 1KG High Strength Black

IEMAI ABS Filament 1.75mm 1KG High Strength Black

IEMAI9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

1kg spool of black ABS filament, 1.75 mm, rated up to 230 mm/s, with low odor and a stated 270°C nozzle setting.

Pros

  • Rated for printing up to 230 mm/s with minimal warping
  • Low-odor formula for a cleaner printing environment, per the maker
  • Stated settings: nozzle 270°C, bed 80-110°C, 0.4 mm nozzle
  • Extreme impact strength for heavy-duty functional parts, per the maker

Cons

  • No diameter tolerance is stated
  • No vacuum sealing or drying guidance is stated
  • No enclosure requirement is stated
  • No warranty term is stated

Other machines to compare

Specs compared

Model HQ Score Spool size Diameter Tolerance Heat resistance Nozzle / bed Enclosed
Polymaker ABS 2KG 9.7/10 2KG (2 spools) 1.75 mm +/- 0.03 mm Vicat 104°C 245-265°C / 90-100°C Recommended
ELEGOO ABS Black 2KG 9.6/10 2KG (2 spools) 1.75 mm Not stated Up to 85°C Not stated Required
Bambu Lab ABS 1kg 9.6/10 1kg refill 1.75 mm +/- 0.03 mm Not stated Not stated Recommended
JAYO ABS Black 1kg 9.6/10 1kg spool 1.75 mm +/- 0.03 mm Not stated Not stated Required
IEMAI ABS Black 1kg 9.5/10 1kg spool 1.75 mm Not stated Not stated 270°C / 80-110°C Not stated

Specs are what each manufacturer publishes as its rating on the listing, collected 10 November 2026. Vicat is the softening temperature as listed.

How the picks were scored

Each filament is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Polymaker ABS 2KG 9.7 32 22 21 n/a 0
ELEGOO ABS Black 2KG 9.6 30 21 21 n/a 0
Bambu Lab ABS 1kg 9.6 30 21 20 n/a 0
JAYO ABS Black 1kg 9.6 29 20 20 n/a 0
IEMAI ABS Black 1kg 9.5 29 20 19 n/a 0

HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

What the listings tell you, and what they leave out

Five ABS filament listings were compared. All five stated a 1.75 mm diameter and a black color. Three stated a +/- 0.03 mm tolerance; two stated no tolerance. Two stated a heat resistance figure, 85°C and a Vicat softening temperature of 104°C. None stated a warranty term, and none stated a safety listing. Two listings stated print settings with nozzle and bed temperatures.

Treat ABS as a filament that needs an enclosed printer: four listings call for an enclosed chamber or printer, and one states no enclosure requirement.

Buying guide: choosing the best abs filament black

Spool size

Two spools here hold 2KG, in two 1kg spools each; three hold 1kg. A 2KG bundle keeps a spare spool on the shelf for a long print run. A 1kg spool suits a single project or a first spool of a new brand. Check whether the listing sells a refill or a spool: the Bambu Lab listing is a 1kg refill for AMS.

Diameter and tolerance

All five filaments state a 1.75 mm diameter. Three state a +/- 0.03 mm tolerance: Polymaker, Bambu Lab and JAYO. Two state no tolerance: ELEGOO and IEMAI. A stated tolerance lets the printer feed consistently, so check the tolerance in the listing before ordering.

Heat resistance

ABS suits parts that see heat, but the listings state different figures. ELEGOO states heat resistance up to 85°C. Polymaker states a Vicat softening temperature of 104°C. Bambu Lab, JAYO and IEMAI state heat resistance with no figure. Match the stated figure to the part: a mount in a hot car needs a stated temperature, not a claim.

Print settings

Two listings state nozzle and bed temperatures. Polymaker states a nozzle temperature of 245-265°C and a bed temperature of 90-100°C, with the cooling fan turned off. IEMAI states a nozzle temperature of 270°C, a heated bed of 80-110°C and a standard 0.4 mm nozzle. The other three listings state no print settings, so check the filament maker’s settings before the first print.

Drying and storage

Moisture hurts ABS prints. Polymaker states its filament is vacuum sealed with desiccant, and to dry at 70°C for approximately 6 hours if the filament absorbs moisture. ELEGOO states each spool comes vacuum sealed and recommends drying out before use. Bambu Lab and JAYO state vacuum sealing with desiccant. IEMAI states no vacuum sealing or drying guidance. A filament dry box keeps a spool dry between prints.

Safety

ABS printing gives off fumes and odor, so print in a ventilated space with an enclosed printer, and keep the printer away from open flame. Two listings here claim a low-odor formula. Never laser ABS filament or ABS parts: the material releases harmful fumes under a laser.

Project Match

  • Drone mounts and protective cases: ELEGOO ABS, which names drone mounts, protective cases and rugged outdoor gear.
  • Functional prototypes and mechanical parts: Polymaker ABS, which names functional prototypes, mechanical parts, robotics, tools and fixtures.
  • Enclosures and tools: Bambu Lab ABS, which names mechanical parts, enclosures, tools and functional prototypes.
  • Industrial and engineering projects: JAYO ABS, which names industrial, engineering and hobby projects.
  • Heavy-duty functional parts: IEMAI ABS, which names heavy-duty functional parts, mechanical components and industrial prototypes.

FAQ: lasers and CNC

Why is ABS filament good?

ABS is strong, tough and heat resistant, per the listings. ELEGOO states impact resistance and heat resistance up to 85°C, Polymaker states a Vicat softening temperature of 104°C, and Bambu Lab states strength, rigidity and long-term durability for mechanical parts.

What does ABS filament stand for?

ABS stands for acrylonitrile butadiene styrene, a plastic known for toughness and heat resistance. The listings here use it for mechanical parts, enclosures, tools and functional prototypes.

Is ABS filament heat resistant?

Yes, per the listings. ELEGOO states heat resistance up to 85°C, Polymaker states a Vicat softening temperature of 104°C, and the other three state heat resistance with no figure. Match the stated figure to the part.

How long does ABS filament last?

No listing here states a shelf life or a print life. The listings state vacuum sealing with desiccant to protect the filament from moisture, and Polymaker states to dry at 70°C for approximately 6 hours if the filament absorbs moisture. Store the spool sealed and dry.

Does ABS filament need an enclosed printer?

Four listings here call for an enclosed chamber or printer. ELEGOO states an enclosed printer is required, and Polymaker, Bambu Lab and JAYO state an enclosed chamber. IEMAI states no enclosure requirement. An enclosed chamber helps reduce warping, per the Polymaker listing.

Related: the best ABS plastic 3D printer filament, the best 3D printer lubricant oil, the Sunlu S1 vs S2 filament dryer, and the 3D printers hub.

More buying guides

3D Printers ·

Best ABS Filament Black Under $25 (2026)

Five black ABS filaments compared by diameter, accuracy, print temperatures, spool weight and enclosure needs, from what each listing states.