Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best ABS Filament for Enclosed Printers (2026)

4 ABS spools for enclosed FDM printers, compared by heat resistance, diameter accuracy, pack size and warranty terms.

Best ABS Filament for Enclosed Printers (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Creality ABS White 4kgBest OverallCreality ABS White 4kg9.7/10View on Amazon
  2. 2ELEGOO ABS Black 4kgRunner-UpELEGOO ABS Black 4kg9.6/10View on Amazon
  3. 3Stronghero3D ABS 1kgBest for ColorStronghero3D ABS 1kg9.5/10View on Amazon

ABS prints warp and split when the air around them cools too fast, and an enclosed printer is the fix most makers reach for: the enclosure holds warm air around the part while each layer bonds to the layer below it. This guide compares the best ABS filament for enclosed printers, from spools built for functional parts to a rainbow spool built for display pieces, and scores each spool on what its listing actually states. This guide covers ABS for printing in enclosed printers, not laser work.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Creality ABS White 4kg: 4-pack of white ABS at 1.75 mm with +/-0.02mm accuracy stated, 12-month after-sales service and a 1 Year warranty. Check price on Amazon
  • Runner-Up ELEGOO ABS Black 4kg: 4 kg of black ABS with heat resistance up to 85 °C stated, vacuum-sealed spools and an enclosed printer required. Check price on Amazon
  • Best for Color Stronghero3D ABS 1kg: Rainbow ABS in yellow, green, blue, purple, red and orange on a 1 kg spool, with enclosed printers recommended. Check price on Amazon

Machines on the list

Creality ABS 3D Printer Filament 1.75mm, White

Creality ABS 3D Printer Filament 1.75mm, White

Creality9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-pack of white ABS at 1.75 mm with +/-0.02mm accuracy stated, 12-month after-sales service and a 1 Year warranty. Prints: large ABS parts with edges and corners, with no layer separation or warped edges per the listing.

Pros

  • +/-0.02mm accuracy stated for the 1.75 mm filament
  • 4-pack, 4 kg of white ABS for large prints
  • 12-month after-sales service with 24 hours support stated
  • Impact resistance, heat resistance and dimensional stability stated

Cons

  • Heat resistance stated with no temperature figure
  • No enclosed-printer note in the listing
  • White only in this listing
ELEGOO ABS 3D Printer Filament 1.75mm Black 4KG

ELEGOO ABS 3D Printer Filament 1.75mm Black 4KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4 kg pack of black ABS at 1.75 mm with heat resistance up to 85 °C stated, vacuum-sealed spools and an enclosed printer required. Prints: drone mounts, protective cases, rugged outdoor gear and industrial tools.

Pros

  • Heat resistance up to 85 °C stated
  • 1.75 mm diameter with full mechanical winding and manual inspection
  • Vacuum-sealed spools to keep moisture out
  • 4 kg pack: 4 spools of 1 kg each

Cons

  • No warranty term in the listing
  • Enclosed printer required, per the listing
  • Black only in this listing
  • No diameter accuracy figure stated
SUNLU ABS Filament 1.75mm,Black+White+Blue+Red,4kg

SUNLU ABS Filament 1.75mm,Black+White+Blue+Red,4kg

SUNLU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Four ABS spools in Black, White, Blue and Red, with heat resistance, impact resistance and stated print settings.

Pros

  • Heat resistance and toughness for durable, functional parts
  • Four colors in one pack: Black, White, Blue and Red
  • Stated settings: nozzle 250-260°C, platform 80-100°C, speed 40-60mm/s
  • Diameter tolerance of ±0.02mm and compatibility with most FDM printers

Cons

  • An enclosure is recommended during printing
  • Warranty description reads 1 year manufacture
  • No Vicat figure is stated
  • No drying guidance is stated
Stronghero3D ABS Rainbow 3D Printer Filament

Stronghero3D ABS Rainbow 3D Printer Filament

Stronghero3D9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of rainbow ABS at 1.75 mm with color change across yellow, green, blue, purple, red and orange. Prints: functional parts, model structures, toys, props and creative projects.

Pros

  • Rainbow color change across yellow, green, blue, purple, red and orange
  • Toughness, impact resistance and durability above decorative filaments
  • 1.75 mm diameter with stable diameter control stated
  • Enclosed printers recommended for better performance

Cons

  • No warranty term in the listing
  • No temperature figure for heat resistance
  • No diameter accuracy figure stated
  • 1 kg spool only in this listing

Other machines to compare

Specs compared

Filament HQ Score Diameter Pack Heat resistance Enclosed Warranty
Creality ABS White 4kg 9.7/10 1.75 mm 4 kg, 4-pack Stated, no figure Not stated 1 Year
ELEGOO ABS Black 4kg 9.6/10 1.75 mm 4 kg, 4 spools Up to 85 °C Required Not stated
Stronghero3D ABS 1kg 9.5/10 1.75 mm 1 kg spool Stated, no figure Recommended Not stated
SUNLU ABS 4-Color 4kg 9.6/10 1.75 mm 4 kg, 4 colors Stated, no figure Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 3 November 2026.

Best ABS Filament for Enclosed Printers: How to Compare Them

Start with the enclosure note. ELEGOO states an enclosed printer is required, Stronghero3D recommends enclosed printers, and Creality and SUNLU carry no enclosed-printer note in their listings. Then compare heat figures: ELEGOO states heat resistance up to 85 °C, while Creality and Stronghero3D state heat resistance with no temperature figure and SUNLU states heat resistance in the title only. Diameter is the same across the guide at 1.75 mm, so accuracy separates the spools: Creality states +/-0.02mm accuracy, while the other listings state no accuracy figure. Pack size runs from a 1 kg spool to 4 kg packs, and only Creality states a warranty term.

Buying guide: ABS filament for enclosed printers

Enclosed printers and ABS

ABS warps as it cools, so an enclosed printer holds warm air around the part and keeps each layer bonded while the print runs. ELEGOO states an enclosed printer is required and says its ABS is compatible with most enclosed 3D printers. Stronghero3D recommends enclosed printers for better performance. Creality states its ABS is compatible with most FDM printers and with all FDM printers of Creality, with no enclosed-printer note. SUNLU carries no enclosed-printer note in its title. If your printer is open, check the enclosed-versus-open comparison in our enclosed vs open 3D printer guide before you buy ABS.

Diameter and accuracy

Every spool here is 1.75 mm ABS, so diameter does not separate the picks. Accuracy does: Creality states +/-0.02mm accuracy, while ELEGOO, Stronghero3D and SUNLU state no accuracy figure. ELEGOO states 1.75 mm high-precision diameter with full mechanical winding and manual inspection, and Stronghero3D states stable diameter control for clean details. A steady diameter feeds smoothly, so check the accuracy figure on the listing before you buy.

Heat resistance and drying

Heat resistance is the point of ABS for functional parts. ELEGOO states heat resistance up to 85 °C and water resistance, and recommends drying out before use. Creality states heat resistance and impact resistance with no temperature figure, and Stronghero3D states heat resistance with no temperature figure. SUNLU states heat resistance in the title only. ABS takes up moisture from the air, so keep spools vacuum-sealed or dry before printing: ELEGOO ships each spool vacuum-sealed, and our how to dry filament guide covers drying methods and tools.

Pack size, color and warranty

Pack size sets how much filament you hold. ELEGOO and Creality each hold 4 kg, Stronghero3D holds 1 kg, and SUNLU holds 4 kg across black, white, blue and red. ELEGOO is black, Creality is white, Stronghero3D is rainbow, and SUNLU spans black, white, blue and red in 1 pack. Only Creality states a warranty term: 1 Year, with 12-month and 24 hours after-sales service. The other listings state no warranty term, so check the listing you buy before you count on support.

Ventilation

Run an enclosed printer with ventilation and follow the printer maker’s guidance on airflow. ABS filament is a printing material, not a laser material. Store spools dry and ventilated, away from high temperature, sun and humid conditions, as Creality notes in its listing.

Project Match

Pair each project with the spool whose listing states it.

  • Functional parts and industrial tools: ELEGOO ABS Black 4kg, with heat resistance up to 85 °C stated and strong layer adhesion.
  • Large ABS parts with edges and corners: Creality ABS White 4kg, with +/-0.02mm accuracy stated and no layer separation or warped edges per the listing.
  • Display pieces, gifts and cosplay props: Stronghero3D ABS 1kg, with rainbow color change across yellow, green, blue, purple, red and orange.
  • 4-color packs: SUNLU ABS 4-Color 4kg, with black, white, blue and red in 1 pack. Project types for this spool are Not stated.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty, and How we pick explains the weights. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Creality ABS White 4kg 9.7 32 21 21 n/a 2
ELEGOO ABS Black 4kg 9.6 30 21 20 n/a 0
Stronghero3D ABS 1kg 9.5 28 20 19 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

Does ABS filament need an enclosed printer?

Not every spool states it, but ELEGOO states an enclosed printer is required and Stronghero3D recommends enclosed printers for better performance. An enclosed printer holds warm air around the part while each layer bonds. Creality and SUNLU carry no enclosed-printer note in their listings.

What diameter is ABS filament for enclosed printers?

Every spool here is 1.75 mm ABS. Creality states +/-0.02mm accuracy, while ELEGOO, Stronghero3D and SUNLU state no accuracy figure. Check the diameter and accuracy figures on the listing before you buy.

How hot can ABS prints get?

ELEGOO states heat resistance up to 85 °C for its ABS. Creality and Stronghero3D state heat resistance with no temperature figure, and SUNLU states heat resistance in the title only. Compare the stated figures before you print functional parts.

Which ABS filament has a warranty?

Creality states a 1 Year warranty with 12-month and 24 hours after-sales service. ELEGOO, Stronghero3D and SUNLU state no warranty term in their listings. Check the warranty term on the listing you buy.

Related: best ABS filament for 3D printing, best filament dry box, best ABS CF filament, best heat-resistant 3D printer filament, PLA vs ABS filament and the 3D printers hub.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.