Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Engraving Materials

Blanks and stock to engrave and cut: wood blanks, laser plywood, acrylic sheets, leather, slate coasters, tumblers and material test sheets. See the material guide for what each laser type can handle.

Not sure which type you need?

Bare metal points to a fiber laser, clear acrylic to CO2, wood and leather on a budget to a diode, and thick stock or 3D carving to a CNC router. The Machine Finder narrows it down in five questions, and the material guide shows what each type can cut.

Engraving Materials ·

How to Cut Clear Polycarbonate Sheet

Score thin clear polycarbonate sheet with a carbide cutter and snap it along the line, or slice short pieces with a heavy-duty hand cutter.

Engraving Materials ·

How to Clean Leather After Laser Engraving

Clean engraved leather by wiping away loose soot, washing in small sections with a leather cleaner, and finishing with conditioner to restore softness.

Engraving Materials ·

Sheet of 3/4 Plywood Cost: What to Expect

A sheet of 3/4 plywood cost moves with size, grade and custom cutting, and this guide explains each driver before the featured sheets.

Engraving Materials ·

Copper Sheet Thickness Chart for Engraving

A copper sheet thickness chart that pairs gauge with mm and inches, with sheet sizes and film protection for engraving and craft work.

Engraving Materials ·

Glass Etching Cream DIY: Supplies and Steps

Glass etching cream DIY turns plain glassware, mirrors and windows into permanent frosted designs with a stencil, a brush and a jar of etching…

Guides in this section

Comparing engraving materials

Material choice often matters more than machine power. Compare these points before ordering blanks or sheets. Material details are as each listing states them. Remember the material rules here: PVC, vinyl, polycarbonate and ABS do not belong under a laser, and our material guide lists the safe options for each laser type.

  • Laser compatibility. Diode, CO2 and fiber lasers handle different stock. Check the material guide first.
  • Thickness. The listed thickness decides how many passes a cut needs.
  • Coating and finish. Coated or dyed blanks mark differently from bare stock; read what the listing states.
  • Hazardous materials. Never laser PVC, vinyl or similar; the listing must make clear what the material is.
  • Pack size and flatness. Warped sheets can ruin focus, so look at how the stock ships.
  • Finish and adhesives. Plywood glues, sealed coatings and laminates can produce more smoke or marks than bare wood, so look at the listed construction.
  • Supplier detail. Listings that name the species, grade or alloy are easier to compare than those that say only wood or metal.