Best Abs Wood Filament (2026): 5 Picks for Wood-Look Prints
Five wood PLA filaments with real wood fiber, compared by fiber content, dimensional tolerance, spool size, print settings and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSemdon Wood PLA 4-Pack9.7/10View on Amazon - 2
Best 2-PackCreality Wood PLA 2kg9.7/10View on Amazon - 3
Best for Texture and ScentSUNLU Wood PLA 1kg9.6/10View on Amazon - 4
Best PLA+ ToughnessHOTFINE PLA+ Wood 1kg9.6/10View on Amazon - 5
Best 4-Color BundleOVV3D Wood PLA 4-Pack9.5/10View on Amazon
A wood-look print starts with an idea for a sign, a jewelry box, a scale model or a piece of tabletop terrain, and the filament decides whether the finished piece reads as wood or as plastic. This guide compares the best abs wood filament picks for FDM printers, using only what each listing states about fiber content, tolerance, spool size, print settings and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Semdon Wood PLA 4-Pack: Four wood tones, 30% real wood fibers and the longest stated warranty here, 2 years. Check price on Amazon
- Best 2-Pack Creality Wood PLA 2kg: Two 1 kg spools, a stated +/-0.02 mm tolerance and a 1 year warranty. Check price on Amazon
- Best for Texture and Scent SUNLU Wood PLA 1kg: 15% real wood fibers with a matte finish and a wood scent, plus sandable and stainable prints. Check price on Amazon
- Best PLA+ Toughness HOTFINE PLA+ Wood 1kg: PLA+ the maker describes as tougher, with a stated +/-0.02 mm tolerance and drying before packaging. Check price on Amazon
- Best 4-Color Bundle OVV3D Wood PLA 4-Pack: Four wood tones with over 30% real wood fiber, in 200 g spools for trying colors. Check price on Amazon
Machines on the list

Wood PLA Filament Bundle 1.75mm Wood Filament
A four-roll wood PLA bundle with 30% real wood fibers, four wood tones and a stated 2 year warranty.
Pros
- 30% real wood fibers for a natural wood-like color and matte finish
- Four wood tones in one bundle: Maple, Cherry, Walnut and Mahogany
- Stated 2 year warranty, the longest warranty in this guide
- Each spool vacuum-sealed, with drying before use recommended
Cons
- The listing recommends both a nozzle larger than 0.4 mm and a 0.4 mm nozzle
- 250 g spools hold less filament than the 1 kg spools in this guide
- The listing notes the filament may be relatively brittle
- No spool diameter is stated

Creality Wood PLA 3D Printer Filament 1.75mm, 2kg
A 2 kg wood PLA 2-pack with a stated +/-0.02 mm tolerance and 12-month after-sales service.
Pros
- Two 1 kg spools in one pack, 2 kg in total
- Stated +/-0.02 mm dimensional accuracy
- Neat winding and smooth feeding, per the listing
- 12-month after-sales service with a 1 year warranty
Cons
- No nozzle or bed temperature is stated
- No wood fiber percentage is stated
- No print speed is stated

SUNLU Wood PLA Filament 1.75mm, Wood
A 1 kg wood PLA spool with 15% real wood fibers, a matte finish and a stated 1 year warranty.
Pros
- 15% genuine wood fibers for a matte finish and a wood scent
- Sandable and stainable, for wood wax or paint finishes, per the listing
- Neat-winding technology the maker says prevents tangles and knots
- Stated print settings: nozzle 200-220°C and bed 50-65°C
Cons
- Title states +/-0.02 mm accuracy while the bullets state +/-0.03 mm
- No print speed is stated
- The 15% fiber share is lower than the 30% stated by two other picks
- A single 1 kg spool, with no multi-color option in this listing

Hotfine PLA+ Filament 1kg(2.2lbs)/Spool 1.75mm
A 1 kg PLA+ wood filament with a stated +/-0.02 mm tolerance and print speeds the listing rates up to 300 mm/s.
Pros
- PLA+ the maker describes as tougher and stronger than standard PLA
- Stated +/-0.02 mm tolerance, with over 99% of the filament within that range, per the listing
- Every spool dried for 24 hours before packaging and vacuum-sealed
- Full print settings stated: nozzle 200-220°C, bed 45-65°C, speeds from 50-300 mm/s
Cons
- No warranty term is stated
- No wood fiber percentage is stated
- No spool width is stated
- No wood tone beyond Wood is stated

OVV3D Wood PLA Filament Bundle
A four-pack of 200 g wood PLA spools with over 30% real wood fiber in four wood tones.
Pros
- Over 30% real wood fiber, the highest fiber share stated here
- Four wood tones: Walnut, Oak, Cherry and Teak
- Paper spools and paper box packaging instead of plastic spools
- Vacuum packed with desiccant to keep dry, per the listing
Cons
- No warranty term is stated
- 200 g spools are the smallest spools in this guide
- No nozzle or bed temperature is stated
- Diameter tolerance of +/-0.03 mm, wider than the +/-0.02 mm stated by three other picks
Other machines to compare
Colourbing PLA+ 3D Printer Filament Bundle 1.75mmCheck price on Amazon
YXPOLYER ABS Filament Low Odor ABS+ 3D Printing Brown BeigeCheck price on Amazon
YXPOLYER ABS Filament Low Odor ABS+ 3D Printing Grey BeigeCheck price on Amazon
YXPOLYER ABS Filament Low Odor ABS+ 3D Printing Light IvoryCheck price on Amazon
JAYO Brown Wood PLA 3D Printer Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Filament | Wood fiber | Diameter | Spool | Nozzle | Warranty |
|---|---|---|---|---|---|---|---|
| Semdon Wood PLA 4-Pack | 9.7/10 | Wood PLA | 30% real wood fibers | 1.75 mm | 250 g x 4, 1 kg total | 190-220°C | 2 years |
| Creality Wood PLA 2kg | 9.7/10 | Wood PLA | Not stated | 1.75 mm | 2 kg, 2-pack | Not stated | 1 year |
| SUNLU Wood PLA 1kg | 9.6/10 | Wood PLA | 15% real wood fibers | 1.75 mm | 1 kg spool | 200-220°C | 1 year |
| HOTFINE PLA+ Wood 1kg | 9.6/10 | PLA+ | Not stated | 1.75 mm | 1 kg spool | 200-220°C | Not stated |
| OVV3D Wood PLA 4-Pack | 9.5/10 | Wood PLA | Over 30% real wood fiber | 1.75 mm | 200 g x 4 | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Spool size is the amount of filament in the pack, as the listing states it.
How the picks were scored
Each filament is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing, and a warranty scores only when the listing states a concrete term.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Semdon Wood PLA 4-Pack | 9.7 | 29 | 21 | 21 | n/a | 4 |
| Creality Wood PLA 2kg | 9.7 | 29 | 21 | 21 | n/a | 3 |
| SUNLU Wood PLA 1kg | 9.6 | 27 | 19 | 20 | n/a | 3 |
| HOTFINE PLA+ Wood 1kg | 9.6 | 30 | 21 | 21 | n/a | 0 |
| OVV3D Wood PLA 4-Pack | 9.5 | 27 | 19 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
What the listings tell you, and what they leave out
Five listings were read for this guide. Three state a wood fiber percentage, three state a warranty term, and three state a nozzle temperature range. None of the five is an ABS filament: every pick here is a wood PLA or wood PLA+ filament.
Two listings contradict themselves on a stated spec. The SUNLU title states +/-0.02 mm accuracy while the bullets state +/-0.03 mm, and the Creality spec table lists the model as PETG while the title and bullets describe a PLA filament. The Semdon listing recommends both a nozzle larger than 0.4 mm and a 0.4 mm nozzle. The reviews below state both figures in each case.
Two listings state no nozzle temperature, bed temperature or print speed: Creality and OVV3D. Those spools give no starting point of their own, so the print settings for a first print come from the printer rather than the listing.
Buying guide: choosing the best abs wood filament
Wood fiber content
Wood fiber is what makes a print look and feel like wood instead of plastic. The listings here state 15% real wood fibers for the SUNLU spool, 30% real wood fibers for the Semdon bundle, and over 30% real wood fiber for the OVV3D bundle, while the Creality and HOTFINE listings state no fiber percentage. A higher stated fiber share is not a promise of a stronger print: the Semdon listing notes that real wood powder can make the filament relatively brittle.
PLA, PLA+ and the ABS question
Every pick in this guide is a PLA or PLA+ filament, even though this guide is about ABS wood filament. No listing in this set describes an ABS filament, so a reader who specifically needs an ABS filament will not find it here. The HOTFINE listing describes PLA+ as tougher and stronger than standard PLA, and the PLA picks below cover the keyword as the listings offer it.
Nozzle and bed temperatures
Three listings state print settings: SUNLU recommends a nozzle temperature of 200-220°C and a bed temperature of 50-65°C, HOTFINE recommends 200-220°C and 45-65°C with print speeds from 50-300 mm/s, and Semdon recommends 190-220°C and 45-60°C with a speed of 50-80 mm/sec. The Creality and OVV3D listings state no temperatures.
Spool size and color range
The Creality pack holds 2 kg across two 1 kg spools, the SUNLU and HOTFINE listings each hold a single 1 kg spool, and the two bundles trade spool size for color range: Semdon gives four tones at 250 g per spool for 1 kg in total, and OVV3D gives four tones at 200 g per spool. The SUNLU spool measures 8.00 inches in diameter with a 2.50 inch width and a 2.20 inch hub hole, and the HOTFINE spool measures 8.00 inches in diameter with a 2.20 inch center hole.
Drying and storage
Wood PLA absorbs moisture, and the listings are clear about keeping it dry. HOTFINE dries every spool for 24 hours before packaging and vacuum-seals it, Semdon vacuum-seals each spool and recommends drying before use, and OVV3D vacuum-packs its spools with desiccant. Creality asks for a dry and ventilated place away from high temperature, sun and humidity. For storage between prints, see the best rechargeable silica gel desiccant guide.
The Semdon listing recommends a hardened steel nozzle for wood PLA and drying the filament before use. Store spools dry and ventilated, as the Creality listing asks.
Project Match
Pair the project with the pick that fits it:
- Scale models and rustic home decor with a wood scent and matte finish: SUNLU Wood PLA 1kg, with 15% real wood fibers and a sandable, stainable surface.
- Jewelry boxes, tabletop gaming terrain and replacement parts: SUNLU Wood PLA 1kg, which the listing names for those uses.
- Trying four wood tones without committing to full-size spools: Semdon Wood PLA 4-Pack or OVV3D Wood PLA 4-Pack, with four tones in each bundle.
- Large runs of wood-look prints from one material: Creality Wood PLA 2kg, with two 1 kg spools in the pack.
- Prints that need a tougher PLA+ filament: HOTFINE PLA+ Wood 1kg, which the maker describes as tougher and stronger.
FAQ: lasers and CNC
Is wood PLA filament the same as ABS wood filament?
No. Every pick in this guide is a wood PLA or wood PLA+ filament, and none of the listings describes an ABS filament. The keyword names ABS wood filament, but the listings on offer are PLA based, so this guide compares those.
Can any FDM printer use wood PLA filament?
The listings describe these filaments as fitting most FDM 3D printers, with a 1.75 mm diameter across all five picks. The Semdon listing recommends a hardened steel nozzle, but it gives two nozzle sizes, so confirm the guidance for the spool in hand.
Does wood PLA filament need a special nozzle?
The Semdon listing is the only one that names a nozzle material: hardened steel. It also recommends drying the filament before use, and it notes that real wood powder can make the filament relatively brittle.
Can wood PLA prints be sanded and stained?
Yes, per the SUNLU listing, which describes the filament as highly sandable and stainable, for wood wax or paint finishes.
What nozzle and bed temperatures does wood PLA filament need?
The SUNLU listing recommends 200-220°C at the nozzle and 50-65°C at the bed, HOTFINE recommends 200-220°C and 45-65°C, and Semdon recommends 190-220°C and 45-60°C. The Creality and OVV3D listings state no temperatures.
Related: the 3D printer hub, the best white PLA filament, and the best made in USA PLA filament. Also see the best hand tools for cleaning up 3D prints. Also see the best rechargeable silica gel desiccant.




