Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best TPU Filament Under 25 (2026): 5 Picks Compared

Five 95A TPU spools compared by print speed, nozzle temperature, dimensional accuracy, finish, drying and stated warranty.

Best TPU Filament Under 25 (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU TPU 95A RedBest OverallSUNLU TPU 95A Red9.5/10View on Amazon
  2. 2UGUESS TPU 95A BlackBest SupportUGUESS TPU 95A Black9.5/10View on Amazon
  3. 3Polymaker TPU 95A BlackBest AccuracyPolymaker TPU 95A Black9.5/10View on Amazon
  4. 4EONO3D Matte TPU BlackBest Matte FinishEONO3D Matte TPU Black9.4/10View on Amazon
  5. 5OVERTURE TPU 95A WhiteBest WarrantyOVERTURE TPU 95A White9.3/10View on Amazon

Flexible parts need a filament that bends without snapping, from phone cases and watch bands to gaskets, seals and shoe insoles. This guide to the best tpu filament under 25 compares spools of flexible TPU, the grade makers reach for when a print has to flex, stretch and spring back, and it weighs each listing on the print settings and details the maker actually states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall SUNLU TPU 95A Red: Print speeds of 80 to 120 mm/s, plus or minus 0.03 mm accuracy and vacuum packaging. Check price on Amazon
  • Best Support UGUESS TPU 95A Black: Speeds of 50 to 120 mm/s, a 24-hour pre-drying treatment and 24-hour online support. Check price on Amazon
  • Best Accuracy Polymaker TPU 95A Black: Plus or minus 0.02 mm dimensional accuracy, the smallest figure stated here. Check price on Amazon
  • Best Matte Finish EONO3D Matte TPU Black: A low-gloss matte surface the maker says hides layer lines, on a rigid AMS-ready spool. Check price on Amazon
  • Best Warranty OVERTURE TPU 95A White: A stated 1-year warranty, the only warranty term in this guide. Check price on Amazon

Machines on the list

SUNLU TPU Filament 1.75mm,(1kg,Red,95a TPU)

SUNLU TPU Filament 1.75mm,(1kg,Red,95a TPU)

SUNLU9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of red 95A TPU rated for fast printing, with stated speeds of 80 to 120 mm/s and vacuum packaging.

Pros

  • Print speed of 80 to 120 mm/s, with the maker claiming 3 times the speed of ordinary TPU filament
  • Dimensional accuracy of plus or minus 0.03 mm on a 1.75 mm diameter
  • Nozzle 210 to 230 degrees Celsius and bed 50 to 60 degrees Celsius, for most 1.75 mm FDM printers
  • Vacuum packaging keeps the spool moisture free, with a wide range of colors available

Cons

  • No warranty term is stated in the listing
  • No safety feature or certification is named
  • No drying guidance is stated for a spool left open in humid air
  • The 3 times speed claim names no comparison filament
UGUESS TPU 95A 3D Printer Filament, Black, 1KG

UGUESS TPU 95A 3D Printer Filament, Black, 1KG

UGUESS9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of black 95A TPU with stated speeds of 50 to 120 mm/s, a 24-hour pre-drying treatment and vacuum packaging with desiccants.

Pros

  • Print speed of 50 to 120 mm/s, with a nozzle range of 190 to 230 degrees Celsius
  • Dimensional accuracy of plus or minus 0.03 mm, with precision winding and manual inspection
  • Each spool gets a 24-hour pre-drying treatment and vacuum packaging with desiccants
  • Compatible with all mainstream 1.75 mm FDM printers, with 24-hour online support

Cons

  • No warranty term is stated in the listing
  • No safety feature or certification is named
  • The listing recommends drying the filament for 7 hours before use
Polymaker TPU Filament 1.75mm 95A Flexible 1kg

Polymaker TPU Filament 1.75mm 95A Flexible 1kg

Polymaker9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of black 95A TPU with the smallest stated tolerance here, plus or minus 0.02 mm, and a recommended print speed of 40 mm/s.

Pros

  • Dimensional accuracy of plus or minus 0.02 mm, the smallest stated here
  • Nozzle 210 to 230 degrees Celsius and bed 25 to 60 degrees Celsius
  • Smooth extrusion and strong layer adhesion, with a smooth surface on finished parts
  • Suited to protective covers, grips, seals, gaskets and wearable components

Cons

  • No warranty term is stated in the listing
  • No safety feature or certification is named
  • Recommended print speed of 40 mm/s, the lowest stated here
  • No packaging or drying guidance is stated
EONO3D Flexible 3D Printer TPU Filament 1.75mm 95A

EONO3D Flexible 3D Printer TPU Filament 1.75mm 95A

EONO3D9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of matte black 95A TPU on a rigid AMS-ready spool, with a low-gloss finish the maker says hides layer lines.

Pros

  • Matte finish that the maker says hides layer lines for a molded rubber look
  • Rigid spool built to hold its shape under AMS tension, with tight winding
  • Full starting settings: retraction of 1 to 3 mm and part cooling of 30 to 50 percent
  • Vacuum sealed with desiccant, with a replacement if a roll falls outside spec

Cons

  • No warranty term is stated in the listing
  • No safety feature or certification is named
  • Print speed of 20 to 40 mm/s, the slowest stated range here
  • No dimensional accuracy is stated
OVERTURE TPU 95A Flexible 3D Printer Filament

OVERTURE TPU 95A Flexible 3D Printer Filament

OVERTURE9.3/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 kg spool of white 95A TPU with a stated 1-year warranty, oil resistance and a nozzle range of 210 to 230 degrees Celsius.

Pros

  • 1-year warranty stated in the spec table, the only warranty term here
  • Oil resistant and mechanically stable, for gaskets, seals and protective parts
  • High resilience and shape recovery through repeated stress
  • Low nozzle range of 210 to 230 degrees Celsius, which the maker links to longer economical sessions

Cons

  • No print speed is stated in the listing
  • No dimensional accuracy is stated in the listing
  • No bed temperature is stated in the listing
  • No safety feature or certification is named

Other machines to compare

Specs compared

Model HQ Score Shore hardness Print speed Nozzle Accuracy Warranty
SUNLU TPU 95A Red 9.5/10 95A 80 to 120 mm/s 210 to 230°C Plus or minus 0.03 mm Not stated
UGUESS TPU 95A Black 9.5/10 95A 50 to 120 mm/s 190 to 230°C Plus or minus 0.03 mm Not stated
Polymaker TPU 95A Black 9.5/10 95A 40 to 80 mm/s 210 to 230°C Plus or minus 0.02 mm Not stated
EONO3D Matte TPU Black 9.4/10 95A 20 to 40 mm/s 220 to 240°C Not stated Not stated
OVERTURE TPU 95A White 9.3/10 95A Not stated 210 to 230°C Not stated 1-year

Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.

What the TPU listings tell you

All five listings state the same core spec: flexible TPU at 95A hardness, a 1.75 mm diameter and a 1 kg spool. Beyond that shared core, the listings differ in what they publish. Three state a dimensional accuracy, and two state none. Only one states a warranty term, and none names a safety feature or certification. Two listings give drying guidance for a spool left open in humid air, and one of those, UGUESS, also disagrees with itself: its spec table lists 25 items while its title and bullets describe a single 1 kg spool. Read the settings, not just the title.

Buying guide: the best tpu filament under 25

Shore hardness and flexibility

Every spool here is 95A TPU, the grade the listings describe as a balance of softness and toughness. The makers link that hardness to parts that bend, compress and spring back without cracking, from flexible hinges and straps to gaskets, seals and protective cases. A softer grade would flex more and hold less shape, while a harder grade would print easier and flex less. None of the five listings offers another hardness, so the choice here is not about hardness at all, but about speed, accuracy and finish.

Print speed and settings

Stated print speeds run from 20 to 40 mm/s on the EONO3D spool up to 80 to 120 mm/s on the SUNLU spool, with UGUESS at 50 to 120 mm/s and Polymaker at 40 to 80 mm/s with a recommended 40 mm/s. OVERTURE states no print speed. SUNLU claims its filament prints 3 times the speed of ordinary TPU filament, a maker claim with no named comparison spool. Nozzle ranges sit close together: 210 to 230 degrees Celsius for SUNLU, Polymaker and OVERTURE, 190 to 230 for UGUESS and 220 to 240 for EONO3D. Bed temperatures are 50 to 60 degrees Celsius except Polymaker, which lists 25 to 60.

Dimensional accuracy

Three listings state a dimensional accuracy. Polymaker states plus or minus 0.02 mm, the smallest figure here, while SUNLU and UGUESS state plus or minus 0.03 mm. OVERTURE and EONO3D state no accuracy figure, so a buyer who cares about consistent extrusion has no stated figure to weigh for those two spools.

Drying and storage

TPU absorbs moisture, and three listings say how the spool arrives: SUNLU, UGUESS and EONO3D all ship vacuum sealed, and UGUESS and EONO3D add desiccants. UGUESS says each spool gets a 24-hour pre-drying treatment and recommends drying the filament for 7 hours before use. EONO3D says to dry for 4 to 6 hours at 50 degrees Celsius if the spool has been open in humid air. OVERTURE states a 1-year shelf life for unopened spools. For drying gear, see the best filament dryer for TPU guide.

Matte or glossy finish

Only EONO3D names a finish. Its matte black spool has a low-gloss surface that the maker says scatters light instead of reflecting it, so layer lines fade and prints read as molded rubber rather than shiny plastic. The other four listings state no finish, so a buyer who wants a clean premium look has one named option here. For more matte spools, see the best matte black TPU filament guide.

Project Match

Pair the project with the spool that names it:

  • Phone cases and watch bands: EONO3D, SUNLU and UGUESS name phone cases, and SUNLU and UGUESS also name watch bands.
  • Gaskets and seals: OVERTURE, SUNLU and Polymaker name gaskets and seals.
  • Wearable parts: SUNLU, UGUESS and Polymaker name wearable components.
  • Grips and protective covers: Polymaker and EONO3D name grips and protective covers.
  • Shoe insoles, straps and shoe soles: SUNLU and UGUESS name shoe insoles, and EONO3D names straps and shoe soles.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty. For TPU filament, safety points come from named safety features or certifications in the listing, and no listing here names any, so no spool earns safety points. Only one listing states a warranty term, so only one spool earns warranty points.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU TPU 95A Red 9.5 32 21 21 0 0
UGUESS TPU 95A Black 9.5 30 21 21 0 0
Polymaker TPU 95A Black 9.5 29 21 20 0 0
EONO3D Matte TPU Black 9.4 27 22 20 0 0
OVERTURE TPU 95A White 9.3 22 18 19 0 3

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.

FAQ: lasers and CNC

What nozzle temperature does TPU 95A need?

The listings here give different ranges by spool: SUNLU, Polymaker and OVERTURE list 210 to 230 degrees Celsius, UGUESS lists 190 to 230 degrees Celsius, and EONO3D lists 220 to 240 degrees Celsius. Start with the range on the spool you buy, and adjust from there.

Can TPU print on a Bowden extruder?

EONO3D says direct drive prints straight away, while Bowden setups need slower speed and shorter retraction, plus a filament guide to avoid buckling. The other listings state no extruder guidance, so Bowden users should follow the EONO3D settings as a starting point and slow down from there.

How should TPU filament be stored?

Keep it dry. SUNLU, UGUESS and EONO3D ship vacuum sealed, and UGUESS and EONO3D add desiccants. UGUESS says to store the remaining filament with the desiccant inside an airtight container, and recommends drying for 7 hours before use. EONO3D says to dry for 4 to 6 hours at 50 degrees Celsius if the spool has been open in humid air.

What is TPU 95A filament used for?

The listings name flexible functional parts: phone cases, watch bands, shoe insoles, gaskets, seals, grips, hinges, straps, bumpers and protective covers, plus wearable components and drone parts. The grade suits parts that bend, stretch and spring back rather than rigid prints.

Does matte TPU hide layer lines?

EONO3D claims its matte finish does: the low-gloss surface scatters light instead of reflecting it, so layer lines fade and prints read as molded rubber rather than shiny plastic. No other listing here names a finish, so the claim rests on the one maker that states it.

Related: best PLA filament for 3D printers, best 3D printer bed adhesive, and best tools to clean up 3D prints.

More buying guides