Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 3D Printer Filament for Outdoor Use (2026): 4 ASA Picks

Four ASA filaments for outdoor prints, compared on heat resistance, print speed, print settings and the warranty each listing states.

Best 3D Printer Filament for Outdoor Use (2026): 4 ASA Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ERYONE HS ASA BlackBest OverallERYONE HS ASA Black9.7/10View on Amazon
  2. 2OVERTURE ASA BlackBest WarrantyOVERTURE ASA Black9.6/10View on Amazon
  3. 3iSANGHU ASA WhiteHighest Heat ResistanceiSANGHU ASA White9.6/10View on Amazon
  4. 4iSANMATE ASA BlackLowest Print TempiSANMATE ASA Black9.5/10View on Amazon

A bracket on a garden gate, a sign by a front door, a cover for an outdoor outlet. Parts that live outside need a filament that holds its shape and color in sun, rain and heat. The best 3d printer filament for outdoor use is an ASA that resists UV and weather, and this guide compares the ASA spools on what each listing states: heat resistance, print speed, print settings and warranty.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall ERYONE HS ASA Black: High-speed ASA up to 200mm/s, UV, weather, heat and chemical resistance, pre-dried and vacuum-sealed. Check price on Amazon
  • Best Warranty OVERTURE ASA Black: The only stated warranty here, 1 year, with heat resistance up to 96°C and a clog-free formula. Check price on Amazon
  • Highest Heat Resistance iSANGHU ASA White: Withstands up to 100°C, with a matte finish and print settings from 260 to 280°C. Check price on Amazon
  • Lowest Print Temp iSANMATE ASA Black: Print temp from 240 to 270°C, the lowest stated range here, with UV and weather resistance. Check price on Amazon

Machines on the list

ERYONE ASA Filament 1.75mm UV&Weather Resistant

ERYONE ASA Filament 1.75mm UV&Weather Resistant

ERYONE9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A high-speed ASA filament that prints up to 200mm/s, with UV, weather, heat and chemical resistance for outdoor parts.

Pros

  • Prints up to 200mm/s, the highest stated speed here
  • UV, weather, heat and chemical resistance for outdoor parts
  • Pre-dried and vacuum-sealed with desiccant
  • Enclosed printer and drying guidance for less warping

Cons

  • No warranty term is stated
  • No print temperature is stated in the listing
  • Needs a properly configured high-speed printer for the top speed
  • No heat-resistance figure is stated in the listing
OVERTURE ASA Filament 1.75mm

OVERTURE ASA Filament 1.75mm

OVERTURE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An ASA filament with heat resistance up to 96°C, a clog-free formula and the only stated warranty here, 1 year.

Pros

  • Heat resistance up to 96°C, with UV and weather resistance
  • Stated 1 year warranty, the only one here
  • Clog-free formula, dried 24 hours before packaging
  • Dimensional accuracy ±0.02mm with CCD diameter measuring

Cons

  • No print temperature or speed is stated in the listing
  • 1-year shelf life for unopened spools, with proper storage required
  • Cardboard spool, not a plastic spool
  • No bed temperature is stated in the listing
iSANGHU ASA Filament 1.75mm

iSANGHU ASA Filament 1.75mm

iSANGHU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A white ASA filament that withstands up to 100°C, with a matte finish and full print settings from 260 to 280°C.

Pros

  • Withstands up to 100°C, the highest stated heat figure here
  • Full print settings stated: 260 to 280°C, bed 90 to 120°C, fan 0%, speed 40 to 60mm/s
  • Matte finish, with a stated diameter of 1.75 ±0.02mm
  • Dried 24 hours and vacuum-sealed with desiccants

Cons

  • No warranty term is stated
  • Print temp 260 to 280°C needs an enclosed printer and glue for adhesion
  • White only in this listing
iSANMATE ASA Filament 1.75mm Black 1KG

iSANMATE ASA Filament 1.75mm Black 1KG

iSANMATE9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A black ASA filament with UV and weather resistance, a print temp of 240 to 270°C and a speed of 30 to 100mm/s.

Pros

  • Print temp from 240 to 270°C, the lowest stated range here
  • UV and weather resistance for outdoor functional parts
  • Dimensional accuracy ±0.02mm
  • Vacuum-sealed with desiccant, with a stated 24-hour support reply

Cons

  • No warranty term is stated
  • No heat-resistance figure is stated in the listing
  • Enclosed printer recommended, with glue on the bed
  • Packaging bullet mentions PLA filament, though this is an ASA spool

Other machines to compare

Specs compared

Model HQ Score Material Diameter Print temp Print speed Heat resistance Warranty
ERYONE HS ASA Black 9.7/10 ASA 1.75mm Not stated Up to 200mm/s Stated, no figure None stated
OVERTURE ASA Black 9.6/10 ASA 1.75mm Not stated Not stated Up to 96°C 1 year
iSANGHU ASA White 9.6/10 ASA 1.75mm 260-280°C 40-60mm/s Up to 100°C None stated
iSANMATE ASA Black 9.5/10 ASA 1.75mm 240-270°C 30-100mm/s Stated, no figure None stated

Size and performance figures are the brand’s ratings quoted from listings on 6 November 2026.

Every pick here is ASA, and that is the point

All four spools are ASA, the material these listings pitch for outdoor parts, and all four claim UV and weather resistance. The differences are in the numbers each listing states: heat resistance, print speed, print settings and warranty. That is what the ranking rests on.

Buying guide: how to pick the best 3d printer filament for outdoor use

UV and weather resistance

Every spool here claims UV and weather resistance, which is the baseline for outdoor parts. The iSANGHU goes further with a claim of stronger weathering and UV resistance than standard ABS, and the ERYONE adds chemical resistance. Treat those as maker claims, and check the stated heat figure next.

Heat resistance

Heat decides whether a part holds its shape in summer sun. The iSANGHU withstands up to 100°C, the OVERTURE up to 96°C, and the ERYONE and iSANMATE state heat resistance with no figure. A stated figure beats a bare claim when the part sits in direct sun.

Print speed and settings

Speed matters when the part is large. The ERYONE prints up to 200mm/s, the iSANMATE 30 to 100mm/s and the iSANGHU 40 to 60mm/s, while the OVERTURE states no speed. The iSANGHU states the full settings, 260 to 280°C with a bed of 90 to 120°C and fan at 0%, and the iSANMATE states 240 to 270°C with a bed of 80 to 100°C. The OVERTURE and ERYONE state no print temperature, so check the maker’s guidance for those spools.

Enclosure and warping

ASA warps without a warm, still print environment. The iSANMATE and ERYONE listings recommend an enclosed printer, and the iSANGHU suggests an enclosure with glue for adhesion. The iSANMATE warns that open-frame printers may be more prone to warping and cracking. Dry the spool before printing, and store it sealed with desiccant after.

Warranty and support

Only the OVERTURE states a warranty term, 1 year, and it also states a 1-year shelf life for unopened spools. The iSANMATE promises technical solutions with a 24-hour reply, and the ERYONE offers a support team for settings and handling. A stated warranty is worth a look when the spool is a repeat buy.

Safety

ASA prints best in an enclosed printer with ventilation, since the fumes need somewhere to go. Never leave a running printer unattended, keep the area clear of anything that can burn, and store spools dry and sealed.

Project Match

  • Outdoor signs: the ERYONE, which the maker lists for outdoor signs, and the iSANGHU, which the maker lists for roof coverings and construction profiles.
  • Protective enclosures and junction boxes: the ERYONE for protective enclosures, and the iSANGHU for junction boxes.
  • Automotive accessories and car grilles: the ERYONE for automotive accessories, and the iSANGHU for car grilles.
  • Functional parts in heat: the iSANGHU, which withstands up to 100°C, and the OVERTURE, which states heat resistance up to 96°C.
  • Marine and wet locations: the ERYONE for marine applications, and the iSANGHU, which the maker lists for use in seawater.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Filament has no laser safety listing to state, so every spool here scores zero on safety; only the OVERTURE states a warranty term, so it is the only spool that scores on warranty.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
ERYONE HS ASA Black 9.7 33 22 22 n/a 0
OVERTURE ASA Black 9.6 28 20 20 n/a 2
iSANGHU ASA White 9.6 29 20 20 n/a 0
iSANMATE ASA Black 9.5 28 20 19 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

What filament is best for outdoor 3D prints?

ASA is the material these listings pitch for outdoor parts, with UV and weather resistance on every spool here. The ERYONE adds chemical resistance, and the iSANGHU states heat resistance up to 100°C. Pick from the stated heat figure and print settings, not the marketing.

Do I need an enclosed printer for ASA?

The iSANMATE and ERYONE listings recommend an enclosed printer, and the iSANGHU suggests an enclosure with glue for adhesion. The iSANMATE warns that open-frame printers may be more prone to warping and cracking. An enclosure keeps the print warm and still, which ASA needs.

What temperature should I print ASA at?

The iSANMATE states 240 to 270°C with a bed of 80 to 100°C, and the iSANGHU states 260 to 280°C with a bed of 90 to 120°C and fan at 0%. The OVERTURE and ERYONE state no print temperature, so check the maker’s guidance for those spools.

How should I store ASA filament?

Every spool here comes vacuum-sealed with desiccant, and the OVERTURE adds a 1-year shelf life for unopened spools with proper storage. After opening, the ERYONE listing says to store the spool in a dry box or a resealable moisture-proof bag, and the iSANGHU says to store it back in the bag after use.

Which of these ASA filaments has a warranty?

Only the OVERTURE states a warranty term, 1 year. The iSANMATE promises technical solutions with a 24-hour reply, and the ERYONE offers a support team. The iSANGHU states no warranty or support term.

Related: best PETG filament black, best ABS filament black, best 3d printer enclosure for Ender 3, best portable fume extractor for 3D printer and the 3d printers hub.

More buying guides