Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best ABS Filament Green (2026): 5 Picks Compared

5 green ABS spools, 1.75mm and 1kg each, compared by diameter tolerance, heat figures, enclosure needs and warranty.

Best ABS Filament Green (2026): 5 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Kexcelled Matte ABSBest OverallKexcelled Matte ABS9.7/10View on Amazon
  2. 2Bambu Lab ABS GreenBest for Bambu PrintersBambu Lab ABS Green9.7/10View on Amazon
  3. 3YUANEANG ABS GreenBest with Print SettingsYUANEANG ABS Green9.6/10View on Amazon
  4. 4ELEGOO ABS GreenBest for Enclosed PrintersELEGOO ABS Green9.6/10View on Amazon

A green ABS spool turns a functional print into a part that stands out on the bench: brackets, enclosures, drone mounts and tool holders in a color that is easy to spot among black and gray prints. A best abs filament green spool has to do more than look right, though. It has to hold its shape under heat, feed without tangling, and print with low warp in an enclosed printer. This guide compares green ABS spools on diameter control, heat figures, enclosure needs and the warranty each listing states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read the affiliate disclosure.

Quick picks

  • Best Overall Kexcelled Matte ABS: Matte olive green ABS with a 101°C heat distortion temperature, ±0.03mm tolerance and a stated 10 year warranty. Check price on Amazon
  • Best for Bambu Printers Bambu Lab ABS Green: A 1kg Bambu Green refill with ±0.03mm tolerance, low warp and vacuum-sealed packing with desiccant. Check price on Amazon
  • Best with Print Settings YUANEANG ABS Green: Stated settings of 230 to 250°C nozzle and 80 to 110°C bed, with ±0.03mm tolerance and a matte-green finish. Check price on Amazon
  • Best for Enclosed Printers ELEGOO ABS Green: Green ABS rated up to 85°C, vacuum-sealed, with less-tangle winding for enclosed printers. Check price on Amazon

Machines on the list

Kexcelled Matte ABS Filament 1.75mm Olive Green

Kexcelled Matte ABS Filament 1.75mm Olive Green

kexcelled9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A matte olive green ABS spool, 1.75mm and 1kg, with a stated heat distortion temperature of 101°C and a 10 year warranty.

Pros

  • Heat distortion temperature of 101°C, the highest stated here
  • ±0.03mm dimensional accuracy with neat winding, no clogging and no bubbles
  • Matte surface with no obvious plastic feeling and no secondary treatment required
  • Vacuum sealed with desiccant, and a 10 year warranty stated in the listing

Cons

  • Olive green, not the bright green of the other spools
  • No enclosure guidance in the listing
  • No print temperatures are stated
  • Listing claims higher rigidity than ordinary ABS without a comparison figure
Bambu Lab ABS Filament Bambu Green 1kg Refill

Bambu Lab ABS Filament Bambu Green 1kg Refill

Bambu Lab9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1kg Bambu Green ABS refill, 1.75mm with ±0.03mm tolerance, made for AMS and FDM printers with low warp.

Pros

  • ±0.03mm tolerance for smooth extrusion and consistent dimensional accuracy
  • Low warp formulation for enclosed chambers and heated print environments
  • Can be sanded, drilled, painted, or acetone-smoothed
  • Vacuum-sealed with desiccant for moisture-free printing

Cons

  • Sold as a refill, so check the spool it fits before ordering
  • No heat figure is stated
  • No warranty term in the listing
  • No print temperatures are stated
YUANEANG ABS 3D Printer Filament 1.75mm Green

YUANEANG ABS 3D Printer Filament 1.75mm Green

YUANEANG9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A green ABS spool, 1.75mm and 1kg, with stated print settings, ±0.03mm precision and a matte-green finish.

Pros

  • Stated settings: 230 to 250°C nozzle and 80 to 110°C bed, with an enclosure
  • ±0.03mm dimensional precision for smooth feeding and fewer jams
  • Low warping with a clean matte-green surface that handles sanding well
  • Compatible with Bambu Lab, Prusa, Ender, Creality, Anycubic, Elegoo and Sovol printers

Cons

  • No heat figure is stated
  • No warranty term in the listing
  • No vacuum-sealed packing is stated
  • Matte-green finish only; no other green shade is stated
ELEGOO ABS 3D Printer Filament 1.75mm Green 1KG

ELEGOO ABS 3D Printer Filament 1.75mm Green 1KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A green ABS spool, 1.75mm and 1kg, rated up to 85°C with less-tangle winding and vacuum-sealed packing.

Pros

  • Rated up to 85°C and water resistant for functional parts
  • Less-tangle winding with full mechanical winding and manual inspection
  • Vacuum-sealed packing to prevent moisture
  • Impact resistant and tough, listed for drone mounts and rugged outdoor gear

Cons

  • Requires an enclosed printer
  • No diameter tolerance figure is stated
  • No warranty term in the listing
  • No print temperatures are stated
JAYO ABS 3D Printer Filament 1.75mm Olive Green

JAYO ABS 3D Printer Filament 1.75mm Olive Green

JAYO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An olive green ABS spool, 1.75mm and 1kg, with a stated hot deformation temperature of 90 and ±0.03mm accuracy.

Pros

  • Hot deformation temperature of 90 for heat-exposed parts
  • ±0.03mm diameter tolerance across the 1kg spool
  • Impact resistant, listed for automotive parts and household items
  • Olive green color for a distinctive finish

Cons

  • The 90 figure carries no unit in the listing
  • No enclosure guidance in the listing
  • No warranty term in the listing
  • No print temperatures are stated

Other machines to compare

Specs compared

Model HQ Score Diameter Spool Heat figure Tolerance Enclosure Warranty
Kexcelled Matte ABS 9.7/10 1.75mm 1kg 101°C ±0.03mm Not stated 10 year
Bambu Lab ABS Green 9.7/10 1.75mm 1kg refill Not stated ±0.03mm Enclosed chamber Not stated
YUANEANG ABS Green 9.6/10 1.75mm 1kg Not stated ±0.03mm Enclosure recommended Not stated
ELEGOO ABS Green 9.6/10 1.75mm 1kg (2.2lbs) Up to 85°C Not stated Enclosed printer required Not stated
JAYO ABS Olive Green 9.6/10 1.75mm 1kg (2.2lbs) 90 ±0.03mm Not stated Not stated

Size and performance figures are the brand’s ratings quoted from listings on 12 November 2026. Diameter is the filament diameter; every spool here is 1.75mm.

What the listings tell you, and what they leave out

5 listings were read for this guide. Every spool here is 1.75mm and 1kg. Bambu Lab, YUANEANG, JAYO and kexcelled state a diameter tolerance of ±0.03mm, while ELEGOO states a high-precision 1.75mm diameter without a tolerance figure. Only kexcelled states a warranty term, with a 10 year warranty in the spec table.

Heat figures differ, and they are not all measured the same way. ELEGOO rates its spool up to 85°C. JAYO states a hot deformation temperature of 90. Kexcelled states a heat distortion temperature of 101°C. Those figures come from different listings, so compare them as stated figures, not as a single ranking. YUANEANG states no heat figure but gives print settings instead: a 230 to 250°C nozzle and an 80 to 110°C bed, with an enclosure for best print quality.

Color also needs a careful read. ELEGOO, Bambu Lab and YUANEANG list green, while JAYO and kexcelled list olive green. Bambu Lab calls its color Bambu Green, with 40500 in the spec table. The kexcelled title says matte olive green, and its spec table color reads Matte-olive Green.

Buying guide: the best abs filament green

Diameter and tolerance

Every spool here is 1.75mm. A tolerance of ±0.03mm means the diameter stays close to 1.75mm along the spool, which the Bambu Lab, YUANEANG, JAYO and kexcelled listings all state. ELEGOO states a high-precision 1.75mm diameter without a tolerance figure. A spool that feeds smoothly and resists tangles matters as much as the figure: ELEGOO lists less-tangle winding with full mechanical winding and manual inspection, and kexcelled lists neat winding with no clogging and no bubbles.

Heat and warp

ABS holds shape under heat better than PLA, per the YUANEANG listing, and every listing here ties heat resistance to functional parts. ELEGOO rates its spool up to 85°C and calls it water resistant. JAYO states a hot deformation temperature of 90. Kexcelled states a heat distortion temperature of 101°C. Warp is the other half of the story: Bambu Lab and YUANEANG both describe low warp, and Bambu Lab ties it to an enclosed chamber or heated print environment.

Enclosure and drying

ABS prints best enclosed. ELEGOO says an enclosed printer is required. Bambu Lab formulates for an enclosed chamber or heated print environment. YUANEANG recommends an enclosure for best print quality. ELEGOO also recommends drying out before use, and Bambu Lab and kexcelled ship vacuum-sealed with desiccant to keep moisture out.

Finish and post-processing

Green ABS takes a finish well. Bambu Lab says its spool can be sanded, drilled, painted, or acetone-smoothed. YUANEANG describes a smooth matte-green surface that handles sanding and post-processing well. Kexcelled lists a matte surface with no obvious plastic feeling and no secondary treatment required.

Project Match

Pair the spool with the printing the bench does most:

  • Functional parts and brackets in green: the YUANEANG spool or the ELEGOO spool, both listed for functional parts, brackets and enclosures.
  • Parts that face heat: the kexcelled spool, with a stated heat distortion temperature of 101°C.
  • Bambu Lab printers with AMS: the Bambu Lab refill, made for AMS and FDM printers.
  • Olive green prints with a matte finish: the kexcelled spool or the JAYO spool, both listed as olive green.
  • Drone mounts and rugged outdoor gear: the ELEGOO spool, listed for drone mounts, protective cases and rugged outdoor gear.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing, and a listing that contradicts itself loses points for the claim in question.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Kexcelled Matte ABS 9.7 32 21 20 n/a 3
Bambu Lab ABS Green 9.7 32 22 20 n/a 0
YUANEANG ABS Green 9.6 30 21 21 n/a 0
ELEGOO ABS Green 9.6 29 21 21 n/a 0
JAYO ABS Olive Green 9.6 29 20 20 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

Does green ABS need an enclosed printer?

ELEGOO says an enclosed printer is required, Bambu Lab formulates for an enclosed chamber or heated print environment, and YUANEANG recommends an enclosure for best print quality. JAYO and kexcelled state no enclosure need in their listings.

What nozzle and bed temperatures does green ABS need?

The YUANEANG listing recommends a 230 to 250°C nozzle and an 80 to 110°C bed, with an enclosure. The other listings state no print temperatures.

How hot can green ABS parts get?

ELEGOO rates its spool up to 85°C. JAYO states a hot deformation temperature of 90. Kexcelled states a heat distortion temperature of 101°C. Each figure comes from its own listing, so read them as stated figures.

Can green ABS parts be sanded or smoothed?

Yes, per the listings. Bambu Lab says its ABS can be sanded, drilled, painted, or acetone-smoothed. YUANEANG says its matte-green surface handles sanding and post-processing well. Kexcelled says its matte surface needs no secondary treatment.

What is the difference between green and olive green ABS?

Color only, as the listings state it. ELEGOO, Bambu Lab and YUANEANG list green, while JAYO and kexcelled list olive green. Bambu Lab calls its color Bambu Green, with 40500 in the spec table.

Related: the 3d printer hub, abs filament for 3d printing, pla filament 1.75 mm, light blue 3d printer filament, glitter filament for 3d printing, paintable 3d printer filament, and wood petg filament.

More buying guides