Best Cream ABS Filament (2026): 5 Picks for FDM Printing
Five 1.75mm ABS filaments in cream tones, from skin beige to cold white, compared by tolerance, print speed, heat resistance and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallKexcelled Rapid ABS9.6/10View on Amazon - 2
Best for Low-Odor Indoor PrintingYXPOLYER ABS+ Ivory9.6/10View on Amazon - 3
Best ABS+eSUN ABS+ Cold White9.5/10View on Amazon - 4
Best ToleranceSUNLU ABS Skin Beige9.4/10View on Amazon
A skin-tone print that looks like a shop prop instead of a finished part usually comes down to the filament, not the printer. Cream ABS gives functional prints a warm, natural tone for display pieces and prototypes, and the best cream abs filament keeps that color while it prints straight and holds its shape after it cools. This guide compares five cream-toned ABS spools on the numbers each listing publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Kexcelled Rapid ABS: Rated to 500mm/s with a Vicat softening temperature of 96°C and a stated 10 year warranty. Check price on Amazon
- Best for Low-Odor Indoor Printing YXPOLYER ABS+ Ivory: A low-odor ABS+ rated to 200 mm/s, listed as safe for indoor use, on a reusable transparent PC spool. Check price on Amazon
- Best ABS+ eSUN ABS+ Cold White: An enhanced ABS+ with improved cracking and warping on large-size items and a stated length of 410-425m. Check price on Amazon
- Best Tolerance SUNLU ABS Skin Beige: A stated tolerance of +/- 0.02mm, below the +/- 0.03 mm and +/- 0.05mm figures stated by the other spools that give one. Check price on Amazon
Machines on the list

Kexcelled High Speed ABS Filament 1.75mm,500mm/s
A 1.75mm high-speed ABS filament in a skin tone, rated to 500mm/s with a Vicat softening temperature of 96°C and a stated 10 year warranty.
Pros
- Rated to 500mm/s, the top speed figure in this guide
- Vicat softening temperature of 96°C, with lower shrinkage and better interlayer adhesion per the listing
- Dimensional accuracy of +/- 0.03 mm, neatly wound, with no clogging or bubbles claimed
- Dried before packaging and vacuum sealed with desiccant
Cons
- No nozzle or bed temperature range in the listing
- 500mm/s is a maximum speed; the listing gives no recommended speed range
- No total filament length stated

YXPOLYER ABS Filament Low Odor ABS+ 3D Printing
A low-odor ABS+ filament in light ivory with a marble texture, rated to 200 mm/s and listed for indoor printing, with a reusable transparent PC spool.
Pros
- Low-odor formulation the listing calls safe for indoor use, for home, school and studio printing
- Rated to 200 mm/s and prints at temperatures as low as 220°C
- Reusable transparent PC spool that works in most filament dryers and shows remaining filament
- AMS compatible, with strong layer adhesion and low warping per the listing
Cons
- No dimensional tolerance stated in the listing
- No total filament length stated
- States a low end of 220°C but no upper nozzle temperature and no bed temperature

eSUN ABS+ Filament 1.75mm
An ABS+ filament in cold white with a dimensional accuracy of +/- 0.05mm and a stated total length of 410-425m on a 1KG spool.
Pros
- ABS+ formulation with improved cracking and warping on large-size items, per the listing
- Total length of 410-425m stated, the only length figure in this guide
- Vacuum sealed with a desiccant bag, with tight diameter tolerance and good winding
- Names Bambu Lab, Voron, Raise3D, Prusa and Creality Ender printers as compatible
Cons
- No warranty term in the listing
- Dimensional accuracy of +/- 0.05mm, above the +/- 0.02mm and +/- 0.03 mm figures stated elsewhere
- No print speed stated
- No nozzle or bed temperature stated

SUNLU ABS Filament 1.75mm,Skin Beige,1kg
A 1.75mm ABS filament in skin beige with a stated tolerance of +/- 0.02mm and a full recommended print range.
Pros
- Dimensional accuracy of +/- 0.02mm
- Full recommended settings stated: nozzle 240-270°C, bed 80-120°C, speed 50-100mm/s
- Spool diameter of 8.00 inches, width 2.50 inches and hub hole 2.20 inches stated
- Listed for 99% of FDM 3D printers, with good adhesion and less stringing and warping
Cons
- No warranty term in the listing
- No total filament length stated
- The spool diameter bullet is printed twice in the listing
- Recommended speed of 50-100mm/s, below the 200 mm/s and 500mm/s maxima stated elsewhere

ANYCUBIC ABS Filament 1.75mm, 1KG Spool (2.2 lbs)
A 1.75mm ABS filament in khaki with a stated heat resistance of up to 85°C and an anti-warping print area of 220mm x 220mm.
Pros
- Heat resistance of up to 85°C stated, with impact resistance the listing calls superior
- Anti-warping print area of 220mm x 220mm with a heated bed at 100°C
- Intelligent recognition system for use with ACE Pro
- Listed as tougher and more durable than PLA and PETG, with greater resistance to warping
Cons
- No warranty term in the listing
- No dimensional tolerance stated
- No print speed stated
- No total filament length or spool size stated
Other machines to compare
MarsWork PLA BasicCheck price on Amazon
SUNLU ABS Filament 1.75mmCheck price on Amazon
Creality ABS Filament 1.75mmCheck price on Amazon
YXPOLYER ABS Filament Low Odor ABS+ 3D Printing Grey BeigeCheck price on Amazon
Official Creality Hyper ABS Filament 1.75mmCheck price on Amazon
Specs compared
| Model | HQ Score | Filament | Color | Tolerance | Rated speed | Heat figure | Warranty |
|---|---|---|---|---|---|---|---|
| Kexcelled Rapid ABS | 9.6/10 | ABS, 1.75mm | Beige Flesh | +/- 0.03 mm | 500mm/s | Vicat 96°C | 10 Year |
| YXPOLYER ABS+ Ivory | 9.6/10 | ABS+, 1.75mm | Light Ivory | Not stated | 200 mm/s | Not stated | 1 Year |
| eSUN ABS+ Cold White | 9.5/10 | ABS+, 1.75mm | Cold White | +/- 0.05mm | Not stated | Not stated | Not stated |
| SUNLU ABS Skin Beige | 9.4/10 | ABS, 1.75mm | Skin Beige | +/- 0.02mm | 50-100mm/s | Not stated | Not stated |
| ANYCUBIC ABS Khaki | 9.4/10 | ABS, 1.75mm | Khaki | Not stated | Not stated | 85°C | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026. Tolerance is the stated dimensional accuracy; speed is the rated maximum unless the listing gives a range.
What the listings tell you, and what they leave out
This guide compares five cream ABS filament listings. Two stated a warranty term (YXPOLYER 1 Year, Kexcelled 10 Year), three stated a tolerance (SUNLU +/- 0.02mm, Kexcelled +/- 0.03 mm, eSUN +/- 0.05mm), three stated a speed (SUNLU 50-100mm/s, YXPOLYER 200 mm/s, Kexcelled 500mm/s) and two stated a heat figure (ANYCUBIC up to 85°C, Kexcelled Vicat 96°C).
SUNLU prints its spool diameter bullet twice, and the YXPOLYER and Kexcelled spec tables carry typos. Only eSUN states a total length (410-425m), and only SUNLU states a full recommended range with nozzle, bed and speed.
Buying guide: the best cream abs filament
ABS vs ABS+
Two spools here are ABS+ rather than plain ABS: the eSUN and the YXPOLYER. eSUN calls ABS+ an enhanced version of ordinary ABS, with cracking and warping significantly improved when printing large-size items, plus strength, toughness and heat resistance. YXPOLYER pairs the ABS+ name with low odor and a 200 mm/s maximum speed. For large or load-bearing parts, the ABS+ listings make the better case on paper.
Tolerance and winding
Tolerance is the stated dimensional accuracy of the filament, and three listings give one: SUNLU at +/- 0.02mm, Kexcelled at +/- 0.03 mm and eSUN at +/- 0.05mm. A tighter figure means the diameter varies less along the spool. eSUN and Kexcelled both claim neat winding with no tangles and no clogging, and SUNLU claims no bubbles and no tangles. ANYCUBIC and YXPOLYER state no tolerance.
Speed and temperatures
Speed figures come in two forms here. Kexcelled rates a maximum of 500mm/s and YXPOLYER a maximum of 200 mm/s, while SUNLU gives a recommended range of 50-100mm/s. A maximum is not a recommended speed, so treat it as a ceiling, not a setting. For temperatures, SUNLU recommends a nozzle of 240-270°C and a bed of 80-120°C, YXPOLYER prints at temperatures as low as 220°C, and ANYCUBIC names a heated bed at 100°C for its anti-warping area. eSUN states no speed and no temperatures.
Color: what cream means here
Cream covers five shades in this guide: skin beige, khaki, cold white, light ivory and beige flesh. The names matter because the tone changes the look of a finished part: cold white is the white end of the range, khaki and beige flesh sit at the warm end, and the YXPOLYER light ivory adds a marble texture and a tan beige tone.
Spool and storage
Every spool here is 1kg, and two come vacuum sealed with desiccant: eSUN and Kexcelled, with Kexcelled noting the filament is dried before packaging. YXPOLYER uses a reusable transparent PC spool that works in most filament dryers. SUNLU states its spool size outright: 8.00 inches in diameter, 2.50 inches wide, with a 2.20 inch hub hole.
ABS is a 3D printing filament, not a laser material: never laser-cut ABS. Print it in a ventilated space or an enclosure, and follow the maker’s temperature guidance. The YXPOLYER listing calls its low-odor filament safe for indoor use; the other listings make no indoor-use claim.
Project Match
Functional parts and durable prints: SUNLU, ANYCUBIC and YXPOLYER name functional parts, and ANYCUBIC names automobile components and chassis for electronic appliances.
Large-size items: eSUN, whose ABS+ listing says cracking and warping are improved when printing large-size items.
Home, school and studio printing: YXPOLYER, the low-odor listing that names home, school and studio environments.
Fast printing: Kexcelled at 500mm/s and YXPOLYER at 200 mm/s.
Display-ready models: YXPOLYER, with a marble texture and a tan color the listing ties to display-ready models.
How the scores add up
Each spool is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Kexcelled Rapid ABS | 9.6 | 32 | 21 | 21 | 3 | 4 |
| YXPOLYER ABS+ Ivory | 9.6 | 29 | 21 | 20 | 5 | 2 |
| eSUN ABS+ Cold White | 9.5 | 27 | 21 | 19 | 3 | 0 |
| SUNLU ABS Skin Beige | 9.4 | 29 | 20 | 19 | 0 | 0 |
| ANYCUBIC ABS Khaki | 9.4 | 28 | 20 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What is the difference between ABS and ABS+ filament?
ABS+ is an enhanced version of ordinary ABS, according to the eSUN listing, with cracking and warping significantly improved when printing large-size items, plus strength, toughness and heat resistance. Two spools here are ABS+: the eSUN and the YXPOLYER.
What nozzle and bed temperatures does ABS filament need?
Follow the listing for the spool you buy. SUNLU recommends a nozzle of 240-270°C and a bed of 80-120°C, YXPOLYER prints at temperatures as low as 220°C, and ANYCUBIC names a heated bed at 100°C for its anti-warping print area. eSUN and Kexcelled state no temperatures.
Which FDM printers take ABS filament?
Most 1.75mm FDM printers take these spools: SUNLU says its filament suits 99% of FDM 3D printers, ANYCUBIC says it fits most FDM 3D printers, and eSUN names Bambu Lab P1P/X1, Voron 2.4, Raise3D, Prusa, Creality Ender 3 and Ender 7 as compatible.
Why does ABS filament warp?
ABS shrinks as it cools, which pulls print corners up off the bed. The listings answer with heated beds and low-warping formulations: ANYCUBIC claims an anti-warping print area of 220mm x 220mm with a heated bed at 100°C, and eSUN, Kexcelled and YXPOLYER all claim low warping.
Is ABS filament safe to print indoors?
The YXPOLYER listing calls its low-odor filament safe for indoor use and names home, school and studio environments. The other four listings make no indoor-use claim. Print in a ventilated space and follow the maker’s temperature guidance.
Related: the 3d printers hub, and the best abs filament for 3d printing. Also see the best red abs filament. Also see the best matte abs filament. Also see the best abs filament 1.75mm. Also see the best heat resistant 3d printer filament.




