Best Drill Bit to Drill Through Steel (2026): 5 Picks Compared
Five drill bits and sets for drilling through steel compared by material, point angle, size range and stated steel use, with every figure taken from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMACXCOIP M35 Cobalt Set9.5/10View on Amazon - 2
Best Single SizeYellow Paw 1/4 Cobalt9.5/10View on Amazon - 3
Best Step BitNEIKO 10185A Step Bit9.4/10View on Amazon - 4
Most SizesSEDIANAS 5-Pc Step Set9.4/10View on Amazon - 5
Single Bit OptionIRONANT Step Bit 1-3/89.3/10View on Amazon
A steel bracket, a sign backplate or a repair part all need the same thing: a clean hole through steel that does not wander, overheat the bit or leave a ragged edge. The best drill bit to drill through steel is a cobalt twist bit for thick or hardened steel, or a step bit for thin sheet metal, and the choice turns on the steel and the hole size. We compared the bits and sets below on material, point angle, size range and what each one is stated to cut.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall MACXCOIP M35 Cobalt Set: 13-piece M35 cobalt set, 1.5 to 6.5 mm, for hardened steel and stainless Check price on Amazon
- Best Single Size Yellow Paw 1/4 Cobalt: 1/4 in M35 cobalt with TiAlN coating, rated for hardened steel to 40 HRC Check price on Amazon
- Best Step Bit NEIKO 10185A Step Bit: 12 sizes in one bit, 135-degree split point, for steel and stainless Check price on Amazon
- Most Sizes SEDIANAS 5-Pc Step Set: 5 bits with 50 sizes from 1/16 to 1-3/8 in for sheet metal work Check price on Amazon
- Single Bit Option IRONANT Step Bit 1-3/8: one step bit with 10 sizes from 1/4 to 1-3/8 in Check price on Amazon
Machines on the list

MACXCOIP Metric 13Pcs(1.5mm-6.5mm)
A 13-piece metric M35 cobalt set from 1.5 to 6.5 mm for hardened metals, stainless steel and cast iron, in a storage box with size indexes.
Pros
- M35 cobalt for hardened metals, stainless steel and cast iron
- 13 metric sizes from 1.5 to 6.5 mm in one set
- 135 degree point tip with twist design for faster cutting and self-centering
- Storage box with size indexes for easy storage and sorting
Cons
- Not applicable to quenched bolts
- No warranty term is stated
- Metric sizes only, no inch sizes in the set
- Sizes top out at 6.5 mm, so larger holes need another bit

1/4 Inch Cobalt Drill Bit (3 Pack) for Metal
A 3-pack of 1/4 inch M35 cobalt bits with a TiAlN coating and a 135-degree split point, for steel, stainless steel and hardened steel to 40 HRC.
Pros
- M35 cobalt with 5% cobalt steel and TiAlN coating
- 135-degree split point, self-centering to prevent walking
- Rated for hardened steel up to 40 HRC
- 4 inch jobber length with a 2-1/2 inch flute length
Cons
- One size only: 1/4 inch in a 3-pack
- Round shank relies on chuck grip, with no flat stated
- Flute length of 2-1/2 inches limits the depth of a single pass
- No storage box or case is included

NEIKO 10185A Step Drill Bit
A single HSS step bit with a titanium nitride coating that drills 12 sizes and deburrs as it cuts, for steel, stainless steel and sheet metal.
Pros
- 12 sizes in one bit, from 1/16 to 7/8 inch
- 135-degree split point tip, self-centering to prevent walking
- Two-flute spiral design deburrs and expands holes as it cuts
- 3/8 inch tri-flat shank grips better in 3-jaw chucks, cordless drills and drill presses
Cons
- One bit covers a fixed size range, so larger holes need another bit
- HSS steel, not cobalt, so it is not the pick for hardened steel
- Built for sheet metal, so it is not the pick for deep holes in thick plate
- No warranty term is stated

Step Drill Bit Set - 5PCS Titanium HSS Step Bit
A 5-piece titanium HSS step bit set with 50 sizes from 1/16 to 1-3/8 inch, with two spiral flutes for fast chip removal.
Pros
- 50 sizes across 5 pieces, from 1/16 to 1-3/8 inch
- 118-degree split point tip, self-centering to prevent walking
- Two spiral flutes clear chips faster for cleaner holes
- Titanium coating resists heat, corrosion and rust
Cons
- Not recommended for stainless steel or any harder metal
- Titanium HSS, not cobalt, for hard steel
- Five bits to keep track of, with no storage case stated
- Step bits suit sheet metal, not deep holes in thick plate

IRONANT Spiral Flute 1/4" to 1-3/8" Step Drill Bit
A single HSS step bit with a titanium coat that covers 10 sizes from 1/4 to 1-3/8 inch, with a spiral dual-flute design.
Pros
- 10 sizes in one bit, from 1/4 to 1-3/8 inch
- 118-degree split point tip, self-centering to prevent walking
- Spiral dual-flute design clears chips faster
- HSS with titanium coating for sharpness and durability
Cons
- Not recommended for stainless steel or any harder metal
- One bit covers a fixed range, so smaller holes need another bit
- Titanium HSS, not cobalt, for hard steel
- No case is included for storage
Other machines to compare
Anfrere 10 Sizes Step Drill Bit for Metal SheetCheck price on Amazon
STROTON Cobalt Drill Bit SetCheck price on Amazon
Crosstar 21Pcs M35 Cobalt Drill Bit SetCheck price on Amazon
RCINDUSCheck price on Amazon
DEWALT Drill Bit SetCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Sizes | Point | Steel use | Warranty |
|---|---|---|---|---|---|---|
| MACXCOIP M35 Cobalt Set | 9.5/10 | M35 cobalt twist | 13, 1.5-6.5 mm | 135° | Hardened steel, stainless | Not stated |
| Yellow Paw 1/4 Cobalt | 9.5/10 | M35 cobalt twist, TiAlN | 1/4 in, 3-pack | 135° | Hardened steel to 40 HRC | Not stated |
| NEIKO 10185A Step Bit | 9.4/10 | HSS step, TiN | 12, 1/16-7/8 in | 135° | Steel, stainless | Not stated |
| SEDIANAS 5-Pc Step Set | 9.4/10 | HSS step, titanium | 50 in 5 bits, 1/16-1-3/8 in | 118° | Sheet metal, iron; not stainless | Not stated |
| IRONANT Step Bit 1-3/8 | 9.3/10 | HSS step, titanium | 10, 1/4-1-3/8 in | 118° | Sheet metal, iron; not stainless | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 18 November 2026.
How to choose the best drill bit to drill through steel
Cobalt twist bits for thick and hardened steel
For thick plate, stainless steel and hardened steel, the cobalt twist bits lead. The MACXCOIP set is M35 cobalt for hardened metals, stainless steel and cast iron, and the Yellow Paw bit is M35 cobalt with a TiAlN coating, rated for hardened steel up to 40 HRC. Both have a 135 degree point tip that self-centers to prevent walk-off. If the steel is hardened, start with cobalt, not plain HSS.
Step bits for thin sheet metal
For thin sheet metal, a step bit drills and deburrs in one pass. The NEIKO bit covers 12 sizes and states stainless steel, while the SEDIANAS set covers 50 sizes and the IRONANT bit covers 10 sizes, both for sheet metal, aluminum and iron. Step bits suit sheet work; for deep holes in thick plate, a twist bit is the pick.
Point angle and self-centering
All five bits state a split point that self-centers and prevents walking. The cobalt bits and the NEIKO use a 135 degree point, while the SEDIANAS and IRONANT step bits use a 118 degree point. A split point starts the hole where you place it, with less pressure than a plain point.
Size range: one bit or a set
Match the range to the holes you drill. A single 1/4 inch bit covers one size, while the MACXCOIP set covers 13 metric sizes from 1.5 to 6.5 mm and the SEDIANAS set covers 50 sizes from 1/16 to 1-3/8 inch. A set covers more sizes in one purchase, while a single bit suits a repeated hole size. See our types of drill bits and drill bit types for metal for the full range of bit types.
What each bit is not for
Read the limits before you buy. The SEDIANAS and IRONANT bits state they are not recommended for stainless steel or any harder metal, and the MACXCOIP set states it is not applicable to quenched bolts. The NEIKO bit states stainless steel, and the Yellow Paw bit states hardened steel up to 40 HRC. See our best drill bits for hardened steel for more on hardened steel.
Drilling steel throws hot chips and sharp edges. Wear eye protection, clamp the workpiece so it cannot spin, keep hands clear of the bit, and let the bit cool before you touch it. Never hold small steel parts by hand while drilling.
Project Match
- Hardened steel plate and stainless steel: MACXCOIP M35 Cobalt Set or Yellow Paw 1/4 Cobalt, both M35 cobalt with a 135 degree point.
- Stainless steel sheet with varied hole sizes: NEIKO 10185A Step Bit, which states stainless steel across 12 sizes.
- Thin sheet metal, aluminum and iron in many sizes: SEDIANAS 5-Pc Step Set with 50 sizes, or IRONANT Step Bit with 10 sizes.
- Repeated 1/4 inch holes in steel: Yellow Paw 1/4 Cobalt, a 3-pack of one size.
- Metric holes in hardened metal: MACXCOIP M35 Cobalt Set, 13 sizes from 1.5 to 6.5 mm.
How the scores add up
Each bit is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No bit here states a warranty term or a safety certification, so safety and warranty score nothing across the group and the ranking turns on performance, build and value.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MACXCOIP M35 Cobalt Set | 9.5 | 30 | 21 | 21 | 0 | 0 |
| Yellow Paw 1/4 Cobalt | 9.5 | 29 | 21 | 20 | 0 | 0 |
| NEIKO 10185A Step Bit | 9.4 | 28 | 20 | 21 | 0 | 0 |
| SEDIANAS 5-Pc Step Set | 9.4 | 24 | 20 | 20 | 0 | 0 |
| IRONANT Step Bit 1-3/8 | 9.3 | 23 | 20 | 20 | 0 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
Can a step bit drill stainless steel?
It depends on the bit. The NEIKO step bit states stainless steel, while the SEDIANAS and IRONANT step bits state they are not recommended for stainless steel or any harder metal.
What does M35 cobalt mean?
M35 is the cobalt steel grade the two twist bits state. The Yellow Paw bit states HSS with 5% cobalt steel and a TiAlN coating, and the MACXCOIP set states M35 cobalt for hardened metals.
What is a split point?
A split point is a self-centering tip that prevents walking, so the hole starts where you place the bit. The cobalt bits and the NEIKO use a 135 degree point, and the SEDIANAS and IRONANT bits use a 118 degree point.
How many sizes does a step bit cover?
The NEIKO covers 12 sizes, the IRONANT covers 10 sizes, and the SEDIANAS set covers 50 sizes across 5 bits. Check the size list before you buy, since the ranges start at different sizes.
Do I need a different bit for hardened steel?
Yes. The cobalt twist bits state hardened steel: the Yellow Paw is rated to 40 HRC and the MACXCOIP set is stated for hardened metals. The step bits state they are not recommended for harder metal.
Related: CNC tooling, best drill bit for drilling metal, best drill bits for drilling steel, best metal drill bit and drill bit shank types. Also see our best drill bits for aluminum. Also see our drill bit sharpener guide.




