Best Drill Bit to Drill Through Metal (2026)
Step drill bits for metal, from a single 9-step bit to 5-bit sets with 50 sizes, compared by the hole sizes and tips each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallOSTTE 5-Bit Step Set9.5/10View on Amazon - 2
Best Single BitNEIKO 10184A Step Bit9.5/10View on Amazon - 3
Best Laser-Etched SetCOMOWARE 5-Bit Set9.5/10View on Amazon - 4
Best 3-Bit SetAleric 3-Bit Step Set9.4/10View on Amazon - 5
Single Bit to 1-3/8 InchesAnfrere 10-Size Bit9.4/10View on Amazon
A bracket, an enclosure or a sign blank starts as flat metal, and the holes in it decide whether the part fits. A step drill bit opens a hole to the size you need without swapping bits for each size. This guide compares step drill bits to find the best drill bit to drill through metal, from a single bit to full sets, by the hole sizes, tips, shanks and cases each listing states.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall OSTTE 5-Bit Step Set: 5 bits, 50 sizes from 3/16 to 1-3/8 inches, a 118-degree split point and an aluminum case. Check price on Amazon
- Best Single Bit NEIKO 10184A Step Bit: 9 steps from 1/4 to 3/4 inch, a 135-degree split-point tip and a 3/8-inch tri-flat shank. Check price on Amazon
- Best Laser-Etched Set COMOWARE 5-Bit Set: 5 bits with 50 sizes, laser-etched markings, tri-flatted shanks and an aluminum case. Check price on Amazon
- Best 3-Bit Set Aleric 3-Bit Step Set: 3 bits with 28 sizes from 1/8 to 3/4 inch and double cutting blades. Check price on Amazon
- Single Bit to 1-3/8 Inches Anfrere 10-Size Bit: 10 sizes from 1/4 to 1-3/8 inches on a single bit with double flutes. Check price on Amazon
Machines on the list

OSTTE Step Drill Bit Set 5Pcs
A 5-bit step set with 50 sizes from 3/16 to 1-3/8 inches, a 118-degree split point and an aluminum case.
Pros
- 50 sizes from 3/16 to 1-3/8 inches across 5 bits
- 118-degree split point stops slippage at the start
- Titanium-coated HSS for stainless steel, iron and hard metals
- Aluminum case keeps the set organized
Cons
- No warranty term is stated
- No shank type is stated
- A 5-bit set takes more storage than a single bit
- No center punch in the set

NEIKO 10184A Step Drill Bit
A single step bit with 9 steps from 1/4 to 3/4 inch, a 135-degree split-point tip and a 3/8-inch tri-flat shank.
Pros
- 135-degree split-point tip stops the bit walking off center
- 9 sizes from 1/4 to 3/4 inch on a single bit
- #4241 HSS with a titanium nitride coating
- 2-flute design deburrs and pulls chips out of the hole
Cons
- Tops out at 3/4 inch, so larger holes need another bit
- No case for storage
- No warranty term is stated
- Only 9 sizes, fewer than the 28 and 50-size sets

COMOWARE Step Drill Bit Set for Metal HSS 5Pcs
A 5-bit step set with 50 sizes from 3/16 to 1-3/8 inches, laser-etched markings and an aluminum case.
Pros
- 50 sizes from 3/16 to 1-3/8 inches across 5 bits
- Laser-etched markings show the size at each step
- Tri-flatted shanks grip under high torque
- Aluminum case and a center punch in the set
Cons
- No split-point tip angle is stated
- 5 bits to keep track of instead of a single bit
- No weight is stated
- No single-bit option for single-size jobs

Aleric Step Drill Bit Set - Titanium Coated
A 3-bit step set with 28 sizes from 1/8 to 3/4 inch, double cutting blades and tri-flat shanks.
Pros
- 28 sizes from 1/8 to 3/4 inch across 3 bits
- Double cutting blades for faster, smoother drilling
- Tri-flat shanks fit impact drill chucks without slipping
- Titanium-coated HSS for plastic, aluminum, wood and copper
Cons
- Steel is not among the materials the set lists
- Tops out at 3/4 inch, so larger holes need another bit
- No case is stated
- No tip angle is stated

Anfrere 10 Sizes Step Drill Bit for Metal Sheet
A single step bit with 10 sizes from 1/4 to 1-3/8 inches, double flutes and a titanium coating.
Pros
- 10 sizes from 1/4 to 1-3/8 inches on a single bit
- Double flutes let chips escape for clean drilling
- Titanium-coated HSS runs cooler with less friction
- Suits home repairs and light jobs
Cons
- No shank type is stated
- No case is stated
- No tip angle is stated
- Single bit only, with no backup in the set
Other machines to compare
HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist Drill BitsCheck price on Amazon
1/4 Inch Cobalt Drill BitCheck price on Amazon
DEWALT Drill Bit SetCheck price on Amazon
RCINDUSCheck price on Amazon
Specs compared
| Model | HQ Score | Bits | Hole sizes | Size range | Split-point tip | Shank | Case |
|---|---|---|---|---|---|---|---|
| OSTTE 5-Bit Step Set | 9.5/10 | 5 | 50 | 3/16 to 1-3/8 in | 118-degree | Not stated | Aluminum case |
| NEIKO 10184A Step Bit | 9.5/10 | 1 | 9 | 1/4 to 3/4 in | 135-degree | 3/8 in tri-flat | Not stated |
| COMOWARE 5-Bit Set | 9.5/10 | 5 | 50 | 3/16 to 1-3/8 in | Not stated | Tri-flatted | Aluminum case |
| Aleric 3-Bit Step Set | 9.4/10 | 3 | 28 | 1/8 to 3/4 in | Not stated | Tri-flat | Not stated |
| Anfrere 10-Size Bit | 9.4/10 | 1 | 10 | 1/4 to 1-3/8 in | Not stated | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 19 November 2026.
Best drill bit to drill through metal: how to choose
Match the bit to the metal and the hole sizes
Start from the metal and the hole sizes the job needs. The NEIKO, the COMOWARE and the OSTTE list steel, while the Aleric lists aluminum, wood, plastic and copper. The Anfrere gives conflicting answers on steel, so check it before ordering. Then match the size range: the NEIKO covers 1/4 to 3/4 inch, the Anfrere covers 1/4 to 1-3/8 inches, and the sets run from 1/8 or 3/16 inch to 3/4 or 1-3/8 inches.
Step bits drill many sizes with a single bit
A step bit carries several sizes, so the same bit drills every hole up to its largest step. The NEIKO carries 9 steps, the Anfrere carries 10 sizes, the Aleric set carries 28 sizes across 3 bits, and the COMOWARE and OSTTE sets each carry 50 sizes across 5 bits. A set suits a shop that drills many sizes, while a single bit suits a job with few sizes. Laser-etched markings on the COMOWARE bits show the size at each step.
Split point, flutes and shank
The tip decides whether the bit starts on center. The NEIKO uses a 135-degree split-point tip that stops the bit walking off center, and the OSTTE uses a 118-degree split point that stops slippage at the start. 2 flutes clear chips and deburr the hole as the bit cuts. The shank decides the grip: the NEIKO, the Aleric and the COMOWARE use a tri-flat shank that grips in a 3-jaw chuck, while the Anfrere and the OSTTE do not state a shank type.
Work safely
Metal drilling throws sharp chips and heat, so wear eye protection and clamp the workpiece before the bit touches metal. Let the bit do the cutting and keep hands clear of the spinning bit. A step bit deburrs as it cuts, so the hole edge comes out smooth, but check the edge before handling the piece.
Project Match
- Steel sheet and brackets: the NEIKO, the COMOWARE and the OSTTE list steel. The Anfrere gives conflicting answers on steel.
- Aluminum panels and enclosures: the NEIKO, the Aleric, the COMOWARE, the Anfrere and the OSTTE list aluminum.
- Copper and stainless steel: the NEIKO lists copper and stainless steel, and the OSTTE lists stainless steel.
- Plastic and wood panels: every bit lists plastic and wood.
- Many hole sizes in a set: the COMOWARE and OSTTE sets carry 50 sizes each, and the Aleric set carries 28 sizes.
How the scores add up
Each bit set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| OSTTE 5-Bit Step Set | 9.5 | 30 | 21 | 21 | 0 | 0 |
| NEIKO 10184A Step Bit | 9.5 | 30 | 21 | 20 | 0 | 0 |
| COMOWARE 5-Bit Set | 9.5 | 29 | 21 | 20 | 0 | 0 |
| Aleric 3-Bit Step Set | 9.4 | 29 | 20 | 20 | 0 | 0 |
| Anfrere 10-Size Bit | 9.4 | 27 | 20 | 19 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
What size step drill bit do I need for sheet metal?
Match the largest hole the job needs. The NEIKO tops out at 3/4 inch, the Anfrere tops out at 1-3/8 inches, and the Aleric, COMOWARE and OSTTE sets reach 3/4 or 1-3/8 inches.
Can a step drill bit drill stainless steel?
The NEIKO and the OSTTE list stainless steel. The Anfrere gives conflicting answers on steel, so check it before ordering, and the Aleric lists aluminum, wood, plastic and copper.
What does a split-point tip do on a step bit?
It starts the hole on center. The NEIKO uses a 135-degree split-point tip that stops the bit walking off center, and the OSTTE uses a 118-degree split point that stops slippage at the start.
Do step drill bits need a special chuck?
No. The NEIKO, the Aleric and the COMOWARE use a tri-flat shank that grips in a regular drill chuck, and the NEIKO fits 3-jaw drills, cordless drills and drill presses.
How many hole sizes does a step drill bit set cover?
The Aleric set covers 28 sizes across 3 bits, and the COMOWARE and OSTTE sets each cover 50 sizes across 5 bits. The NEIKO covers 9 sizes and the Anfrere covers 10 sizes.
Related: best step bit for metal, best drill bit for drilling metal, best metal drill bit and drill bit shank types. Browse the full index: CNC Tooling.




