Best Drill Bit for Drilling Metal (2026): 5 Sets Compared
5 drill bit sets for metal, from M35 cobalt to titanium coated HSS, compared by material, point, shank and size range.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSinyeenglon M35 Set9.7/10View on Amazon - 2
Best Split PointWildBossy M35 Set9.7/10View on Amazon - 3
Best Stubby SetEZARC M35 Stubby Set9.6/10View on Amazon - 4
Best StorageDEWALT DW13549.5/10View on Amazon
A clean hole in steel starts before the drill spins. The bit has to bite without walking, clear its chips, and hold an edge through plate and tube without going dull halfway through the job. The best drill bit for drilling metal is the set that matches the steel in front of you, with the shank your drill takes and sizes that cover the holes you drill most.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Sinyeenglon M35 Set: M35 cobalt with hardness up to 67, 13 pieces from 1/16 to 1/4 inch, and a 1/4 inch hex shank. Check price on Amazon
- Best Split Point WildBossy M35 Set: M35 HSS with 5% cobalt, a 135-degree split point, and an indexed case for 13 sizes. Check price on Amazon
- Best Stubby Set EZARC M35 Stubby Set: M35 cobalt stubby bits with AlTiN coating, a self-centering tip, and a countersink and driver bits in the box. Check price on Amazon
- Best Storage DEWALT DW1354: A 14 piece titanium nitride coated set with a PILOT POINT tip and connectable storage with a clear lid. Check price on Amazon
Machines on the list

Sinyeenglon Hex Shank Cobalt Drill Bit Set
A 13 piece M35 cobalt set from 1/16 to 1/4 inch, with a 1/4 inch hex shank and an index holder.
Pros
- M35 cobalt with hardness up to 67
- Up to 12 times the life of an average HSS titanium coated bit
- 1/4 inch hex shank with 5 times higher torque than old hex shanks
- 13 pieces from 1/16 to 1/4 inch in an index holder
Cons
- No warranty term is stated
- Top size is 1/4 inch, so larger holes need a bigger set
- Made for metal and hardened steel, so wood and plastic work is not its strength
- The holder measures 6.5 inches x 5.16 inches, wide for a small tool roll

M35 Cobalt Drill Bit Set, 13-Piece
A 13 piece M35 cobalt set from 1/16 to 1/4 inch, with a 135-degree split point and an indexed case.
Pros
- M35 HSS with 5% cobalt for wear and heat resistance
- 135-degree split point helps reduce bit walking
- Fully ground flutes help move chips away from the cutting edge
- Indexed case keeps all 13 sizes organized
Cons
- No warranty term is stated
- Not for glass, ceramic tile, concrete or masonry
- Straight round shank needs a chuck with sufficient capacity
- Needs slower speed and cutting oil on harder metals

EZARC M35 Cobalt Stubby Drill Bit Set for Hard
An 8 piece M35 cobalt stubby set with AlTiN coating, a 1/4 inch hex shank, a countersink bit and two PH2 driver bits.
Pros
- M35 cobalt with AlTiN coating for hardness, heat and wear resistance
- Self-centering tip bites quickly and reduces bit walking
- Stubby profile gives better access in tight spaces
- 3-in-1 set: 5 stubby bits, a 5-flute countersink and two PH2 driver bits
Cons
- Only 5 drill bits in an 8 piece set
- Largest drill size is 3/8 inch
- Stubby length limits deep holes
- Hex shank needs a drill or impact driver that takes 1/4 inch hex

DEWALT Drill Bit Set, Titanium Nitride Coated
A 14 piece titanium nitride coated set with a PILOT POINT tip, a web taper for rigidity, and connectable storage.
Pros
- PILOT POINT tip for speed and clear, burr-free holes
- Patented web taper adds rigidity and reduces breakage
- Connectable storage with clip latch and clear lid
- 14 pieces for wood, metal and plastic
Cons
- Titanium nitride coating rather than cobalt, so it suits general metal work more than hardened steel
- ToughCase Plus cases for the connectable storage are sold separately
- Clear lid shows contents but adds bulk at 8.75 inches x 8.75 inches
- Drill bits only; no countersink or driver bits in the box

WORKPRO 9-Piece Titanium HSS Drill Bit Set
A 9 piece titanium coated HSS set from 1/16 to 3/8 inch, with a 135-degree split point and a 1/4 inch hex shank.
Pros
- Titanium coated HSS with a 135-degree split point
- 9 sizes from 1/16 to 3/8 inch
- 1/4 inch hex shank for quick change in impact drivers
- For wood, PVC, copper, aluminum alloy and stainless steel
Cons
- Cannot be used for masonry construction materials
- Only 9 pieces, the fewest here
- Titanium coating rather than cobalt for hardened steel
- Sizes stop at 3/8 inch
Other machines to compare
HIDOTOL 13 PCS Cobalt Drill Bit Set M35 HSS Twist Drill BitsCheck price on Amazon
STROTON Cobalt Drill Bit SetCheck price on Amazon
KENDO M35 Cobalt Drill Bit Set for MetalCheck price on Amazon
NEIKO 10181A Step Drill Bit SetCheck price on Amazon
ZELCAN 10 Sizes Titanium Step Drill BitCheck price on Amazon
Specs compared
| Model | HQ Score | Material | Pieces | Size range | Shank | Point |
|---|---|---|---|---|---|---|
| Sinyeenglon M35 Set | 9.7/10 | M35 cobalt HSS | 13 | 1/16 to 1/4 in | 1/4 in hex | Not stated |
| WildBossy M35 Set | 9.7/10 | M35 cobalt HSS, 5% cobalt | 13 | 1/16 to 1/4 in | Straight round | 135-degree split |
| EZARC M35 Stubby Set | 9.6/10 | M35 cobalt HSS, AlTiN coating | 8 | 1/8 to 3/8 in | 1/4 in hex | Self-centering |
| DEWALT DW1354 | 9.5/10 | Titanium nitride coated HSS | 14 | Not stated | Not stated | PILOT POINT |
| WORKPRO Titanium Set | 9.5/10 | Titanium coated HSS | 9 | 1/16 to 3/8 in | 1/4 in hex | 135-degree split |
We give each product’s specs as its manufacturer rates them; listings read 15 November 2026.
Buying guide: best drill bit for drilling metal
Cobalt or coated HSS
The Sinyeenglon, WildBossy and EZARC sets are M35 cobalt high-speed steel. The Sinyeenglon maker claims hardness up to 67 and up to 12 times the life of an average HSS titanium coated bit, and the WildBossy set states 5% cobalt for wear and heat resistance. The DEWALT set is titanium nitride coated HSS and the WORKPRO set is titanium coated HSS, which suit general metal work rather than hardened steel.
Split points and walking
A split point helps the bit start where you put it instead of walking across the steel. The WildBossy and WORKPRO sets state a 135-degree split point, and the EZARC set states a self-centering tip that bites quickly into metal. The WildBossy maker also recommends a centre punch for greater accuracy, and slower speed with cutting oil on harder metals.
Hex shank or round shank
The Sinyeenglon, EZARC and WORKPRO sets use a 1/4 inch hex shank, which suits impact drivers and quick bit changes. The WildBossy set uses a straight round shank, which the maker says fits compatible keyed and keyless drill chucks, drill presses and bench drills with sufficient chuck capacity. Match the shank to the tool you will hold the bit in.
Size range and piece count
The Sinyeenglon and WildBossy sets each hold 13 pieces from 1/16 to 1/4 inch. The WORKPRO set holds 9 pieces from 1/16 to 3/8 inch, and the EZARC set holds 8 pieces, with 5 stubby drill bits from 1/8 to 3/8 inch plus a countersink bit and driver bits. The DEWALT set holds 14 pieces, the most here.
Drilling metal throws sharp chips and hot swarf. Wear eye and face protection, clamp the work instead of holding it by hand, keep guards in place, and keep gloves away from rotating parts. Clear chips with a brush, not a bare hand, and let the bit cool before handling it. OSHA machine guarding guidance covers guards and safe practice around rotating parts.
Project Match
- Stainless steel plate and tube: the Sinyeenglon, WildBossy and EZARC sets, all M35 cobalt for stainless steel.
- Tight spaces and quick changes: the EZARC stubby set, with a 1/4 inch hex shank and a compact profile.
- General shop drilling in wood, metal and plastic: the DEWALT 14-piece set.
- Impact driver work with quick bit changes: the Sinyeenglon and WORKPRO sets, with a 1/4 inch hex shank.
- Drilling, countersinking and driving in one job: the EZARC set, with a 5-flute countersink bit and two 2 inch PH2 driver bits.
How the scores add up
Each set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Drill bits have no electrical safety listing to state, so every set here scores zero on that criterion; the ranking comes from performance, build, value and warranty.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Sinyeenglon M35 Set | 9.7 | 33 | 22 | 21 | n/a | 0 |
| WildBossy M35 Set | 9.7 | 32 | 21 | 21 | n/a | 0 |
| EZARC M35 Stubby Set | 9.6 | 29 | 21 | 20 | n/a | 0 |
| DEWALT DW1354 | 9.5 | 27 | 20 | 20 | n/a | 0 |
| WORKPRO Titanium Set | 9.5 | 26 | 19 | 19 | n/a | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
Which drill bit is best for stainless steel?
M35 cobalt is the pick here. The Sinyeenglon, WildBossy and EZARC sets are all M35 cobalt high-speed steel, and each of them states stainless steel among the metals they drill. The Sinyeenglon maker claims hardness up to 67, and the WildBossy set states 5% cobalt for wear and heat resistance.
Do I need cutting oil when drilling metal?
The WildBossy maker says to use cutting oil to control heat, with a slower speed for harder metals and steady pressure. Excessive speed can reduce bit life.
Can I use a hex shank bit in a drill press?
The Sinyeenglon, EZARC and WORKPRO sets use a 1/4 inch hex shank, which suits impact drivers and drills that take hex shanks. The WildBossy set uses a straight round shank, which the maker says fits compatible keyed and keyless drill chucks, drill presses and bench drills with sufficient chuck capacity.
What does a split point do?
A split point helps the bit start where you put it and reduces walking on flat metal. The WildBossy and WORKPRO sets state a 135-degree split point, and the WildBossy maker recommends a centre punch for greater accuracy. The EZARC set states a self-centering tip that bites quickly into metal.
Can these bits drill concrete or masonry?
No. The WildBossy maker states these twist drill bits are not designed for glass, ceramic tile, concrete or masonry, and the WORKPRO set states it cannot be used for masonry construction materials. Use a material-specific bit for those surfaces.
Related: best metal drill bit, drill bit types for metal, best metal tapping fluid and end mill vs drill bit for CNC.




