Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bits for Drilling Steel (2026)

M35 cobalt and titanium-coated drill bit sets for hardened metal, stainless steel and cast iron, compared by sizes, shank, coating and warranty.

Best Drill Bits for Drilling Steel (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1GMTOOLS 13Pcs CobaltBest OverallGMTOOLS 13Pcs Cobalt9.7/10View on Amazon
  2. 2Hariendny 8 Pack TitaniumBest Titanium SetHariendny 8 Pack Titanium9.6/10View on Amazon
  3. 3SEDIANAS 15Pcs CobaltM35 Cobalt Twist Set, Wide RangeSEDIANAS 15Pcs Cobalt9.6/10View on Amazon
  4. 4SEDIANAS 13Pcs CobaltM35 Cobalt Twist SetSEDIANAS 13Pcs Cobalt9.6/10View on Amazon

A drill that walks across the steel, a bit that dulls halfway through the hole, a chuck that will not grip: drilling steel punishes the wrong bit. That is what best drill bits for drilling steel comes down to, the steel in the bit, the point that starts the hole and the sizes that cover the job. This guide compares cobalt and titanium-coated sets for hardened metal, stainless steel and cast iron, and says plainly where each set belongs.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall GMTOOLS 13Pcs Cobalt: M35 cobalt with 5% cobalt, a 135 degree split point and sizes from 1/16 to 1/4 in, with a storage case and 30-day money back. Check price on Amazon
  • Best Titanium Set Hariendny 8 Pack Titanium: Titanium-coated HSS in sizes from 3 to 10 mm with a hex shank and serrated side cutting for sheet metal, wood, aluminum alloy, plastic and drywall. Check price on Amazon
  • M35 Cobalt Twist Set, Wide Range SEDIANAS 15Pcs Cobalt: M35 HSS in sizes from 1/16 to 3/8 in with a straight shank and an index storage case. Check price on Amazon
  • M35 Cobalt Twist Set SEDIANAS 13Pcs Cobalt: M35 HSS in sizes from 1/16 to 1/4 in for hardened metal, stainless steel, cast iron, wood and plastic. Check price on Amazon

Machines on the list

GMTOOLS 13Pcs Cobalt Drill Bits Set

GMTOOLS 13Pcs Cobalt Drill Bits Set

GMTOOLS9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M35 cobalt drill bit set with a 135 degree split point and twist design, in sizes from 1/16 to 1/4 in, for hardened metal, cast iron, stainless steel, plastic and wood, with a storage case.

Pros

  • M35 alloy with 5% cobalt for wear resistance and durability
  • 135 degree split point centers fast with less pressure and less walking
  • Sizes from 1/16 to 1/4 in in a plastic storage case
  • Twist design clears chips faster

Cons

  • Largest bit is 1/4 in, so bigger holes need a larger set
  • No titanium coating is stated
  • Jobber length only, with no long-series option stated
  • Money-back cover lasts 30 days, with no longer warranty term stated
8 Pack Titanium Coated HSS Twist Drill Bits

8 Pack Titanium Coated HSS Twist Drill Bits

Hariendny9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-pack of titanium-coated HSS twist drill bits in sizes from 3 to 10 mm, with a hex shank and serrated side cutting, for sheet metal, wood, aluminum alloy, plastic and drywall.

Pros

  • Titanium coating keeps the edge sharper longer, with life extended by 2 times
  • Hex shank fits most electric drills
  • Serrated side cutting improves chip discharge
  • Fully ground spiral flutes for cooler and faster drilling

Cons

  • Hardened steel is not among its stated uses
  • Largest bit is 10 mm, so bigger holes need a larger set
  • No warranty term is stated
  • Metric sizes only, with no inch sizes stated
Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece M35 cobalt steel twist bit set from 1/16 inch to 3/8 inch, with 5% cobalt and a 135 degree split point.

Pros

  • M35 steel with 5% cobalt stated
  • 135 degree split point, self-centering
  • 15 pieces from 1/16 inch to 3/8 inch, with spares at 1/16, 5/64 and 3/32 inch
  • Index storage case with size index

Cons

  • No warranty term is stated on the listing
  • 15 pieces, fewer than the 99-piece sets
  • No hardness figure is stated
Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set from 1/16 in. to 1/4 in., with 5% cobalt, 135-degree split points and an orange case with a size index.

Pros

  • 13 sizes from 1/16 in. to 1/4 in. cover small and mid-size holes
  • M35 high speed steel with 5% cobalt for hardened metal and stainless steel
  • 135-degree split point, self-centering to prevent walk-off
  • Orange plastic case with a size index keeps the set organized

Cons

  • Round straight shank, no flats to resist slipping in the chuck
  • No warranty term is stated in the listing
  • Largest size is 1/4 in., so larger holes need another bit
  • No shank or flute length is stated for the sizes in the set

Other machines to compare

Specs compared

Model HQ Score Material Sizes Shank Warranty
GMTOOLS 13Pcs Cobalt 9.7/10 M35 HSS, 5% cobalt Sizes from 1/16 to 1/4 in Round 30-day money back
Hariendny 8 Pack Titanium 9.6/10 Titanium-coated HSS Sizes from 3 to 10 mm Hex Not stated
SEDIANAS 15Pcs Cobalt 9.6/10 M35 HSS Sizes from 1/16 to 3/8 in Straight Not stated
SEDIANAS 13Pcs Cobalt 9.6/10 M35 HSS Sizes from 1/16 to 1/4 in Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (15 November 2026).

Best drill bits for drilling steel: what the listings show

Cobalt M35 sets lead for hardened steel

The M35 sets here are high speed steel, and the maker of each lists hardened metal among its uses. The GMTOOLS set adds 5% cobalt to the M35 alloy, which the maker says increases wear resistance and durability, and grinds the point to 135 degrees with a twist design. The two SEDIANAS sets state M35 steel and the same hardened metal use, but give no point angle, no coating and no warranty term, so they sit below the GMTOOLS set in the ranking. The Hariendny set is titanium-coated high speed steel rather than cobalt, and its stated uses run to sheet metal, wood, aluminum alloy, plastic and drywall, with hardened steel not among them.

Titanium coating and the maker’s life claim

The Hariendny set is the only titanium-coated pick here. The maker says the titanium coating keeps the drill edge sharper longer, extending the life of standard drill bits by 2 times, and pairs it with a fully ground spiral flute design that the maker says minimizes friction and heat for cooler and faster drilling. That is the maker’s claim, stated in the listing, and it is the reason this set suits sheet metal and lighter work rather than hardened steel. The GMTOOLS set makes no coating claim of its own: its edge comes from the cobalt alloy and the 135 degree split point, not from a coating.

Sizes and shanks

Size ranges separate the sets more than anything else. The GMTOOLS set covers sizes from 1/16 to 1/4 in, the Hariendny set covers 3 to 10 mm, and the SEDIANAS sets cover 1/16 to 1/4 in and 1/16 to 3/8 in, with the wider range belonging to the set with the index storage case. Shanks differ too: the GMTOOLS set has a universal round shank, the Hariendny set has a hex shank made to fit most electric drills, and the wider SEDIANAS set has a straight shank, while the other SEDIANAS set states no shank type. The Hariendny listing also describes the shank as straight in one place, so the shank wording there is worth checking before ordering.

Two sets with less detail

The two SEDIANAS sets publish less detail than the other two sets, so they sit below them in the ranking. What the titles do state is useful: M35 high speed steel, the size ranges, the straight shank and index storage case on the wider set, and the same list of uses, hardened metal, stainless steel, cast iron, wood and plastic. A buyer who wants stated point, coating or warranty details will not find them in these two listings, and should weigh that against the M35 steel and the wider size range.

What the listings do not state

Warranty cover is thin across this group. Only the GMTOOLS set states anything at all, a 30-day money back promise with a 100% satisfaction guarantee, and no longer warranty term is stated for any set. No listing here states a safety certification, so every safety score is zero and no cert is shown. The Hariendny set is the only one to state a coating, the GMTOOLS set is the only one to state a point angle, and the SEDIANAS sets state neither, which is why the ranking follows the depth of what each listing publishes.

Safety

Wear eye protection, clamp the workpiece so it cannot spin, and let the bit cool before handling it. Never hold small pieces by hand while drilling, and keep hands clear of the chuck while the drill is running.

Project Match

  • Drilling hardened metal and stainless steel: the GMTOOLS cobalt set, with M35 steel, 5% cobalt and a 135 degree split point.
  • Sheet metal, wood, aluminum alloy, plastic and drywall: the Hariendny titanium set, with serrated side cutting and a hex shank.
  • Wider holes in hardened metal: the SEDIANAS set with sizes to 3/8 in and an index storage case.
  • Smaller holes in hardened metal: the SEDIANAS set with sizes to 1/4 in.

How the scores add up

Each set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
GMTOOLS 13Pcs Cobalt 9.7 30 21 21 n/a 1
Hariendny 8 Pack Titanium 9.6 29 20 20 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Machines with a power supply, and items whose listing mentions safety features, are judged on safety; other items use a 90-point scale.

FAQ: lasers and CNC

Can cobalt drill bits drill hardened steel?

Yes, where the listing states it. The GMTOOLS set and both SEDIANAS sets are M35 high speed steel, and the maker of each lists hardened metal among its uses. The GMTOOLS set adds 5% cobalt and a 135 degree split point.

What sizes do I need for drilling steel?

It depends on the holes. The GMTOOLS set covers sizes from 1/16 to 1/4 in, the Hariendny set covers 3 to 10 mm, and the SEDIANAS sets cover 1/16 to 1/4 in and 1/16 to 3/8 in. The widest range here reaches 3/8 in.

Do titanium-coated bits last longer?

The maker of the Hariendny set says the titanium coating keeps the edge sharper longer, extending the life of standard drill bits by 2 times. That is the maker’s claim for this set, and the listing does not state a coating for the cobalt sets.

What is a 135 degree split point?

On the GMTOOLS set it is a fast cutting point that the maker says is automatically centered and penetrates quickly with less pressure, reducing walking. The point is fully ground, with a sharp and durable cutting edge.

Which drill bits fit a standard electric drill?

The Hariendny set has a hex shank that the maker says is designed to fit most electric drills on the market. The GMTOOLS set has a universal round shank, made to fit widely used tool holding systems.

Related: best drill bits for hardened steel, best metal drill bit, best drill bit for stainless steel under $30, drill bit types for metal and the best end mill for steel guide. Also see the end mill vs drill bit for CNC.

More buying guides