Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Metal Drill Bit (2026): 5 Sets for Steel and Sheet Metal

Five metal drill bit sets, from a 21-piece M35 cobalt set to step bit sets with 50 sizes, compared by the materials each maker lists and the sizes each set covers.

Best Metal Drill Bit (2026): 5 Sets for Steel and Sheet Metal
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Crosstar M35 21-PieceBest OverallCrosstar M35 21-Piece9.7/10View on Amazon
  2. 2ZELCAN 5-Piece 50-SizeBest Step Bit SetZELCAN 5-Piece 50-Size9.6/10View on Amazon
  3. 3RCINDUS M35 15-PieceBest for Stainless SteelRCINDUS M35 15-Piece9.6/10View on Amazon
  4. 4ZELCAN 10-Size Step BitBest Single Step BitZELCAN 10-Size Step Bit9.5/10View on Amazon

A clean hole in steel starts before the drill spins: the right bit, the right point, and a shank that holds firm in the chuck. When the bit wanders, the hole wanders with it. This guide picks the best metal drill bit sets, comparing the materials each maker lists, the sizes each set covers, and the point and coating each bit carries.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Crosstar M35 21-Piece: A 21-piece M35 cobalt set from 1/16 to 1/2 inch, with a TiAlN coating and a three-flute design the maker rates to 60 HRC. Check price on Amazon
  • Best Step Bit Set ZELCAN 5-Piece 50-Size: A 5-piece set with 50 sizes from 1/8 to 1-3/8 inch, a 1/4 inch hex shank and four cutting blades on each bit. Check price on Amazon
  • Best for Stainless Steel RCINDUS M35 15-Piece: A 15-piece set of 1/4 inch M35 cobalt bits with a 135 degree split point, made for steel, stainless steel and cast iron. Check price on Amazon
  • Best Single Step Bit ZELCAN 10-Size Step Bit: A single step bit with 10 sizes from 1/4 to 1-3/8 inch and a tri-flatted shank that fits the chuck with no slip. Check price on Amazon

Machines on the list

Crosstar M35 Cobalt Drill Bit Set,Three-Flute

Crosstar M35 Cobalt Drill Bit Set,Three-Flute

Crosstar9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-piece M35 cobalt set from 1/16 to 1/2 inch, with a TiAlN coating, a three-flute design and a three-flat shank.

Pros

  • M35 cobalt steel with 5% cobalt, for stainless steel, hardened cast iron, high-carbon steel and titanium alloys
  • TiAlN coating the maker rates to 1472°F (800°C), for cooler running and longer life
  • Three-flute design with about 40% improved chip ejection, per the maker
  • Three-flat shank locks in the chuck with no spin-out, per the maker

Cons

  • Bits from 1/16 through 7/64 inch use a two-flute design, not the three-flute design
  • The maker recommends it for standard depth of cut, so deep holes are outside its stated use
  • The range tops out at 1/2 inch, so larger holes need a step bit or a bigger set
  • The set covers twist bits only, so stepped holes in sheet metal need a step bit as well
ZELCAN 5PCS Titanium HSS Step Drill Bit Set

ZELCAN 5PCS Titanium HSS Step Drill Bit Set

ZELCAN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece titanium-coated HSS step bit set with 50 sizes from 1/8 to 1-3/8 inch and a 1/4 inch hex shank.

Pros

  • 50 sizes across 5 bits, from 1/8 to 1-3/8 inch, for many hole sizes from one set
  • Four cutting blades and a four-spiral flute design that clears chips, per the maker
  • 1/4 inch hex shank with a quick-release slot for a firm chuck connection and fast changes
  • Clear size markings on each bit and a storage case

Cons

  • Each bit covers only part of the 50 sizes
  • The largest step is 1-3/8 inch, so holes above that size need a different tool
  • Titanium-coated HSS, not cobalt steel, so hardened metal is outside its stated use
  • The cased set measures 4.92 by 1.97 by 6.3 inches
RCINDUS (15PCS) 1/4" Cobalt Drill Bit

RCINDUS (15PCS) 1/4" Cobalt Drill Bit

RCINDUS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece set of 1/4 inch M35 cobalt bits with a 135 degree split point, made for steel, stainless steel and cast iron.

Pros

  • M35 high-speed steel with 5% cobalt, harder than plain HSS
  • 135 degree split point centers on its own and resists walking on hard surfaces
  • 15 identical 1/4 inch bits in one set, so a worn bit has a spare
  • Diameter accuracy held within -0.03 mm, per the maker

Cons

  • Every bit is 1/4 inch, so other hole sizes need a different set
  • No warranty term is stated
  • Plastic storage case, not a metal index case
  • A buyer who needs range pays for spares instead of sizes
IRONANT 5PCS Spiral Flute Titanium HSS Step Drill

IRONANT 5PCS Spiral Flute Titanium HSS Step Drill

IRONANT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece titanium-coated HSS step bit set with 50 sizes and a spiral dual-flute design, made for sheet metal.

Pros

  • 50 sizes in 5 pieces, for many hole sizes from one cased set
  • 118 degree split point tip that centers on its own and resists walking
  • Spiral dual-flute design clears chips faster and lets particles escape, per the maker
  • Aluminum case keeps the 5 step bits organized

Cons

  • Not recommended for stainless steel or harder metal, per the maker
  • No warranty term is stated
  • Titanium-coated HSS, not cobalt steel, so hard metal is outside its stated use
  • Made for sheet metal and thin materials, so thick stock is outside its stated use
ZELCAN 10 Sizes Titanium Step Drill Bit

ZELCAN 10 Sizes Titanium Step Drill Bit

CO-Z9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single titanium-coated HSS step bit with 10 sizes from 1/4 to 1-3/8 inch and a tri-flatted shank.

Pros

  • 10 sizes in a single bit, from 1/4 to 1-3/8 inch, for stepped holes without bit changes
  • Two-flute design clears chips faster, per the maker
  • Tri-flatted shank fits the chuck with a firm grip and resists slip
  • Titanium coating resists heat, corrosion and rust, per the maker

Cons

  • Made for sheet metal and light jobs, and the maker excludes steel and harder metal
  • A single bit, so a worn bit leaves no spare in the box
  • The 10 sizes stop at 1-3/8 inch, so larger holes need a different bit
  • High-speed steel with a titanium coating, not cobalt steel, so hard metal is outside its stated use

Other machines to compare

Specs compared

Model HQ Score Type Sizes Material Point Warranty
Crosstar M35 21-Piece 9.7/10 Twist bit set 1/16 to 1/2 inch, 21 pieces M35 cobalt HSS, TiAlN coating Three-flute, three-flat shank Not stated
ZELCAN 5-Piece 50-Size 9.6/10 Step bit set 1/8 to 1-3/8 inch, 50 sizes Titanium-coated HSS Four-spiral flute, 1/4 inch hex shank Not stated
RCINDUS M35 15-Piece 9.6/10 Twist bit set 1/4 inch, 15 pieces M35 cobalt HSS, 5% cobalt 135 degree split point Not stated
IRONANT 50-Size Set 9.6/10 Step bit set 50 sizes, 5 pieces Titanium-coated HSS, TiAlN 118 degree split point, spiral dual-flute Not stated
ZELCAN 10-Size Step Bit 9.5/10 Step bit 1/4 to 1-3/8 inch, 10 sizes Titanium-coated HSS Two-flute, tri-flatted shank Not stated

Specifications are manufacturer rated, as published by each maker. Size is the diameter range each set covers.

What the makers state, and what they leave out

We read 5 drill bit sets for this guide. None of the 5 states a warranty term or a safety certification, so safety and warranty score nothing here. All 5 state a material, a size range, and a point style or a flute design. The cobalt sets state a cobalt share of 5% and a point angle, while the step bit sets state size counts of 50 and 10.

That pattern shapes the ranking: cobalt twist bits lead for hard metal, and step bits follow for sheet metal work.

Buying guide: choosing the best metal drill bit

Cobalt twist bits vs step bits

A cobalt twist bit drills the diameter it is ground to, so covering many sizes takes many bits. A step bit drills many sizes without a bit change, so a set of 5 step bits can cover 50 sizes. Twist bits suit hard metal and repeated holes at one size; step bits suit sheet metal and varied holes.

Sizes and sets

Match the set to the holes you drill most. A 15-piece set of 1/4 inch bits suits repeated holes at that size, while a 21-piece set from 1/16 to 1/2 inch covers a bench that drills many sizes. A step bit set from 1/8 to 1-3/8 inch covers sheet metal holes across a wide span.

Coatings and point angles

A titanium coating resists heat, corrosion and rust, per the makers that state it, and the TiAlN coating on the Crosstar set is rated to 1472°F (800°C). A split point centers on its own: RCINDUS states 135 degrees, and IRONANT states 118 degrees. A three-flat or tri-flatted shank holds firm in the chuck, while a hex shank with a quick-release slot swaps fast.

What these bits will not do

No bit here is made for every material. The single step bit excludes steel and harder metal, and the IRONANT set is not recommended for stainless steel. Glass needs a different bit entirely, and our diamond tip drill bit set picks cover tile and glass.

Safety

Clamp the work before drilling, wear eye protection, and keep hands clear of the bit while it spins.

Project Match

Match the pick to the project:

  • Brackets and hinge plates in steel: Crosstar M35 21-Piece, with M35 cobalt steel and a TiAlN coating rated to 1472°F (800°C).
  • Repeated 1/4 inch holes in hard metal: RCINDUS M35 15-Piece, with 15 identical bits and a 135 degree split point.
  • Sheet metal holes in many sizes: ZELCAN 5-Piece 50-Size, with 50 sizes from 1/8 to 1-3/8 inch.
  • Light sheet metal work at home: ZELCAN 10-Size Step Bit, with 10 sizes in a single bit.
  • Sheet metal, aluminum and iron: IRONANT 50-Size Set, with 50 sizes and an aluminum case.

How the scores add up

Each bit is scored on performance, build, value, safety and warranty, with the weights published in How we pick. No maker here states a warranty term, so warranty scores nothing in this roundup.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Crosstar M35 21-Piece 9.7 33 22 21 n/a 0
ZELCAN 5-Piece 50-Size 9.6 30 21 21 n/a 0
RCINDUS M35 15-Piece 9.6 29 21 20 n/a 0
IRONANT 50-Size Set 9.6 28 20 20 n/a 0
ZELCAN 10-Size Step Bit 9.5 27 19 19 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

How do you remove a broken drill bit?

Stop the drill, clamp the work, and grip the broken shank with pliers if enough of it stands proud of the hole. If the bit is flush or below the surface, it is hard to pull, and starting a fresh hole nearby may be the practical path. A split point that centers on its own and a shank that holds firm in the chuck keep a bit from snapping.

Can you drill glass with a metal drill bit?

No. Glass needs a diamond tip bit or a spear point bit made for glass, not a twist bit or a step bit made for metal. A metal drill bit can chip or crack glass, and the makers here list metal, plastic and wood, not glass. For glass work, see our diamond tip drill bit set picks.

How do you use a drill bit?

Chuck the bit with the shank seated firm, mark the hole, and start slow so the point bites before you add pressure. A split point centers on its own; a standard point may need a center punch mark. Clamp the work so it cannot spin.

How do you use a glass drill bit?

Use a diamond tip bit or a spear point bit made for glass, with water to cool the cut and light pressure so the glass does not crack. Start at an angle to keep the bit from skating, then ease upright once the cut bites. A metal drill bit is the wrong tool for this job, so reach for a bit the maker lists for glass.

Related: the pottery and glass hub, glass crafts, and CNC tooling. Also see our best drill bit for stainless steel, best drill bit for hardened steel, drill bit types for metal.

More buying guides