Best Drill Bit for Stainless Steel Under $30 (2026)
5 cobalt and step drill bits under 30, compared by alloy, point, shank, size range and pack for drilling stainless steel.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBosch CO2143B9.7/10View on Amazon - 2
Best SetSEDIANAS 13-Piece M359.6/10View on Amazon - 3
Best Value PackRCINDUS M35 20-Pack9.6/10View on Amazon - 4
Best Step BitJerax Step Bit M29.5/10View on Amazon
Stainless steel work hardens under a dull bit, and a bit that skates across the surface leaves a scarred hole and a ruined part. A maker who drills stainless steel brackets, plates and enclosures needs a bit that starts clean, holds its edge and clears chips without grabbing. This guide compares the best drill bit for stainless steel under 30 on the details that decide whether a hole starts clean and stays round: the alloy, the point, the shank and the sizes in the pack.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Bosch CO2143B: M42 alloy with 8% cobalt, a 1/4 in. by 4 in. jobber-length bit with a three-flat shank and a surface-hardened tip for stainless steel. Check price on Amazon
- Best Set SEDIANAS 13-Piece M35: 13 M35 bits from 1/16 in. to 1/4 in. in an orange case with a size index, all with a 135-degree split point. Check price on Amazon
- Best Value Pack RCINDUS M35 20-Pack: 20 M35 bits at 1/8 in. with 5% cobalt and a 135-degree split point, in a plastic storage case. Check price on Amazon
- Best Step Bit Jerax Step Bit M2: One M2 bit with 5 marked sizes from 7/8 in. to 1-3/8 in. for sheet stainless up to 2.7 mm thick. Check price on Amazon
Machines on the list

BOSCH CO2143B 1-Piece 1/4 In. x 4 In. Cobalt M42
An M42 cobalt jobber-length bit, 1/4 in. by 4 in., with 8% cobalt, a three-flat shank and a surface-hardened tip for stainless steel.
Pros
- M42 alloy with 8% cobalt for stainless steel, cast iron, titanium, light-gauge metal and aluminum
- Surface-hardened tip and thick web-helix design for stability in tough material
- Three-flat shank for grip in the chuck
- Maker claims 10x life against standard bits
Cons
- 1 bit only, so a worn bit leaves no spare in the pack
- Warranty states Product Defects Only with no length of cover
- 1/4 in. size only, no smaller or larger sizes in the listing
- No storage case is stated in the listing

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill
A 13-piece M35 cobalt set from 1/16 in. to 1/4 in., with 5% cobalt, 135-degree split points and an orange case with a size index.
Pros
- 13 sizes from 1/16 in. to 1/4 in. cover small and mid-size holes
- M35 high speed steel with 5% cobalt for hardened metal and stainless steel
- 135-degree split point, self-centering to prevent walk-off
- Orange plastic case with a size index keeps the set organized
Cons
- Round straight shank, no flats to resist slipping in the chuck
- No warranty term is stated in the listing
- Largest size is 1/4 in., so larger holes need another bit
- No shank or flute length is stated for the sizes in the set

1/4-Inch Cobalt Steel M35 Jobber Length Twist
A 12-piece pack of 1/4 in. M35 cobalt jobber-length bits with 5% cobalt, a 135-degree split point and a 3-flat shank, in a case.
Pros
- 12 bits at 1/4 in., so a worn bit has a spare ready
- M35 high speed steel with 5% cobalt for hard metal and stainless steel
- 2-3/4 in. flute length and 4 in. overall length, jobber length
- Hardness runs through the material, so the bits can be sharpened again
Cons
- 1/4 in. size only, no other sizes in the pack
- No warranty term is stated in the listing
- No diameter accuracy figure is stated in the listing
- Materials stated are hard metal and stainless steel only

RCINDUS (20PCS) 1/8" Cobalt Drill Bit
A 20-piece pack of 1/8 in. M35 cobalt bits with 5% cobalt, a 135-degree split point and a plastic storage case.
Pros
- 20 bits at 1/8 in. in one pack, the largest count here
- M35 high speed steel with 5% cobalt for hardened metal and stainless steel
- 135-degree split point for automatic centering and no walking
- Diameter accuracy controlled within -0.03 mm
Cons
- 1/8 in. size only, no other sizes in the pack
- No warranty term is stated in the listing
- No shank type is stated in the listing
- No flute or overall length is stated in the listing

Jerax tools 1/4"-1-3/8" M2 Step Drill Bit Unibit
One M2 high speed steel step bit with 5 marked sizes from 7/8 in. to 1-3/8 in., a 3/8 in. tri-flat shank and polished steps for sheet stainless up to 2.7 mm thick.
Pros
- 5 marked sizes from 7/8 in. to 1-3/8 in. in one bit
- Cuts stainless steel up to 12 ga, 2.7 mm thick, with appropriate pressure
- 3/8 in. tri-flat shank locks in a 3-jaw chuck of 3/8 in. or larger
- Polished steps and size highlights show the target hole size while drilling
Cons
- M2 high speed steel, not a cobalt alloy like the other picks
- Not designed for sockets or impact drivers
- A high-torque impact wrench can chip the cutting edges or crack the bit
- No warranty term is stated in the listing
Other machines to compare
DEWALT Cobalt Alloy Steel Drill Bit Set with Pilot PointCheck price on Amazon
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
VALYRIANTOOL 5PCS M35 Cobalt Stubby Drill Bit Set forCheck price on Amazon
RCINDUSCheck price on Amazon
Narwhal 3/8 Inch Drill BitCheck price on Amazon
Specs compared
| Model | HQ Score | Alloy | Size range | Pack | Shank | Warranty |
|---|---|---|---|---|---|---|
| Bosch CO2143B | 9.7/10 | M42, 8% cobalt | 1/4 in. | 1 bit | Three-flat | Product Defects Only |
| SEDIANAS 13-Piece M35 | 9.6/10 | M35, 5% cobalt | 1/16 to 1/4 in. | 13 bits | Round straight | Not stated |
| Drill Hulk M35 12-Pack | 9.6/10 | M35, 5% cobalt | 1/4 in. | 12 bits | 3-flat | Not stated |
| RCINDUS M35 20-Pack | 9.6/10 | M35, 5% cobalt | 1/8 in. | 20 bits | Not stated | Not stated |
| Jerax Step Bit M2 | 9.5/10 | M2 high speed steel | 7/8 to 1-3/8 in. | 1 bit | 3/8 in. tri-flat | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 11 November 2026.
How the picks were scored
Each bit earns an HQ Score from performance, build, value, safety and warranty, with the weights published on the How We Pick page. Safety points need named safety features or certifications, and none of the listings name any. Warranty points need a stated term, and none of the listings state one.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bosch CO2143B | 9.7 | 33 | 22 | 19 | n/a | 0 |
| SEDIANAS 13-Piece M35 | 9.6 | 29 | 21 | 22 | n/a | 0 |
| Drill Hulk M35 12-Pack | 9.6 | 28 | 21 | 21 | n/a | 0 |
| RCINDUS M35 20-Pack | 9.6 | 27 | 20 | 22 | n/a | 0 |
| Jerax Step Bit M2 | 9.5 | 27 | 20 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
What the drill bit listings tell you
The listings state cobalt content plainly: M35 bits carry 5% cobalt and the Bosch M42 bit carries 8% cobalt. Pack sizes run from 1 bit to 20 pieces, and only the Bosch listing states any warranty wording at all, with no length of cover. Hole sizes run from 1/16 in. to 1-3/8 in. across the guide. Read the alloy, the point and the shank before the pack count.
How to pick the best drill bit for stainless steel under 30
Cobalt grade: M35 or M42
M35 bits in this guide state 5% cobalt, and the Bosch M42 bit states 8% cobalt. Cobalt raises heat resistance, which matters because stainless steel work hardens and holds heat at the cutting edge. The M42 bit is the only pick here with 8% cobalt, and it is also the only 1-piece pick in the guide.
Point and shank
A 135-degree split point centers the bit and stops it walking on a hard surface. The RCINDUS, Drill Hulk and SEDIANAS picks all state a 135-degree split point. Shanks differ: the Bosch and Drill Hulk bits use a three-flat shank, the SEDIANAS set uses a round straight shank, and the Jerax step bit uses a 3/8 in. tri-flat shank that fits a 3-jaw chuck of 3/8 in. or larger capacity. Match the shank to the chuck before ordering.
Pack size or 1 bit
A pack of 12 or 20 bits keeps spares on hand when a bit dulls or snaps, and the Drill Hulk pack can be sharpened again because its hardness runs through the material. One premium bit suits a maker who drills the same hole size often. The SEDIANAS set sits between the two: 13 sizes in one case, with no spare of any one size.
Step bits for sheet metal
A step bit drills several hole sizes with 1 bit, which suits sheet work where each hole is a different size. The Jerax step bit states 5 marked sizes from 7/8 in. to 1-3/8 in. and stainless steel up to 12 ga, 2.7 mm thick, with appropriate pressure. It is not designed for sockets or impact drivers, and the listing warns that a high-torque impact wrench can chip the cutting edges or crack the bit.
Wear eye protection, clamp the workpiece, and keep hands clear of a spinning bit. Let the bit cut at its own pace, and clear chips with the drill stopped.
Project Match
- Stainless steel brackets and plates: the Bosch M42 bit, the SEDIANAS set, the Drill Hulk pack and the RCINDUS pack all list stainless steel as a working material.
- Sheet stainless up to 2.7 mm thick: the Jerax step bit, with 5 marked sizes from 7/8 in. to 1-3/8 in.
- Small holes in hard plastic and wood: the RCINDUS pack and the SEDIANAS set both list plastic and wood among the working materials.
- Cast iron: the Bosch bit, the SEDIANAS set and the RCINDUS pack all list cast iron.
- Titanium alloy: the Bosch bit and the SEDIANAS set list titanium and titanium alloy.
FAQ: lasers and CNC
Which drill bit leads this guide for stainless steel?
The Bosch CO2143B leads on alloy: M42 with 8% cobalt, a surface-hardened tip and a thick web-helix design, in a 1/4 in. by 4 in. jobber-length bit. The SEDIANAS set leads on range, with 13 M35 sizes from 1/16 in. to 1/4 in.
What is the difference between M35 and M42 cobalt drill bits?
In this guide, M35 bits state 5% cobalt and the Bosch M42 bit states 8% cobalt. The maker claims the M42 alloy delivers 10x life against standard bits and high heat resistance for extended use.
Can a step drill bit cut stainless steel?
Yes, in sheet form. The Jerax step bit states stainless steel up to 12 ga, 2.7 mm thick, with appropriate pressure, and 5 marked sizes from 7/8 in. to 1-3/8 in. It is not designed for sockets or impact drivers.
Do any of these drill bits state a warranty term?
No stated term. The Bosch listing states Product Defects Only with no length of cover, and the other listings state no warranty wording at all.
Related: drill bit types chart, drill bit chart, best drill bit sharpener for home use and best countersink drill bit with depth stop under 30. Also see our carbide vs HSS end mill. Also see our best center drill for stainless. Also see our spot drill vs center drill. Also see our steel sheet metal thickness chart.




