Best Drill Bit for Stainless Steel (2026)
Five cobalt and step drill bit sets for stainless steel, compared on material, size range, point angle, case and what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best Cobalt SetBosch CO14B 14-Piece9.7/10View on Amazon - 2
Best Single Size ValueRCINDUS M35 20-Piece9.6/10View on Amazon - 3
Widest Small RangeMACXCOIP M35 13-Piece9.6/10View on Amazon - 4
Best Step BitJerax M2 Step Bit9.6/10View on Amazon
A stainless bracket, a tag or a small enclosure: thin stainless parts show up in plenty of shop projects, and a dull bit turns the job into a long push with smoke and a wandering hole. The best drill bit for stainless steel is a cobalt or step bit with a split point that starts where you put it and holds its edge through hard metal. This guide compares the sets on what each listing states: material, size range, point angle, case and stainless use.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Cobalt Set Bosch CO14B 14-Piece: M42 with 8% cobalt, 14 pieces from 1/16 to 1/2 inch, with a thick web-helix design and a case. Check price on Amazon
- Best Single Size Value RCINDUS M35 20-Piece: 20 pieces of 3/16 inch M35 cobalt with 5% cobalt and a 135 degree split point. Check price on Amazon
- Widest Small Range MACXCOIP M35 13-Piece: 13 sizes from 1/16 to 1/4 inch in M35 cobalt with an index storage case. Check price on Amazon
- Best Step Bit Jerax M2 Step Bit: 5 sizes from 1/4 to 3/4 inch in M2 HSS, for stainless steel up to 12ga, 2.7mm thick. Check price on Amazon
Machines on the list

BOSCH CO14B 14-Piece Cobalt Drill Bit Set
A 14-piece M42 cobalt set with 8% cobalt, sizes from 1/16 to 1/2 inch, a thick web-helix design and a case.
Pros
- M42 alloy with 8% cobalt stated
- Sizes from 1/16 to 1/2 inch for stainless steel, cast iron, titanium and aluminum
- Thick web-helix design for stability in tough applications
- Surface-hardened tip for tough, abrasive materials
Cons
- Size list names 13 sizes for a 14-piece set
- No point angle stated
- Warranty reads Product Defects Only with no stated term
- Case measures 7.2 x 5.6 x 1.8 inches, the largest case here

RCINDUS (20PCS) 3/16" Cobalt Drill Bit
A 20-piece set of 3/16 inch M35 cobalt bits with 5% cobalt, a 135 degree split point and a plastic storage case.
Pros
- 20 pieces of 3/16 inch M35 cobalt with 5% cobalt stated
- 135 degree split point for self-centering without walking
- Diameter stated as 4.763 mm with accuracy within -0.03 mm
- Plastic storage case included
Cons
- All 20 pieces are one size, 3/16 inch
- No warranty term stated
- No case size stated
- The diameter accuracy figure comes with no stated method

MACXCOIP 13Pcs(1/16"-1/4")
A 13-piece M35 cobalt set from 1/16 to 1/4 inch with a 135 degree point tip, jobber length and an index storage case.
Pros
- 13 sizes from 1/16 to 1/4 inch in M35 cobalt
- 135 degree point tip for self-centering and fast chip removal
- Index storage case with size indexes for easy sorting
- Hardened and polished inserts for sharp cutting
Cons
- No cobalt percentage stated, unlike the RCINDUS and Bosch sets
- No warranty term stated
- Smallest case here at 4.13 x 3.03 x 0.67 inches
- Only jobber length stated

Jerax tools 1/4"-3/4" M2 Step Drill Bit Unibit
A single M2 HSS step bit with 5 marked sizes from 1/4 to 3/4 inch and 4 spiral flutes, for stainless steel up to 12ga, 2.7mm thick.
Pros
- 5 marked sizes from 1/4 to 3/4 inch in one bit
- For stainless steel up to 12ga, 2.7mm thick
- 4 spiral flutes with polished steps and size highlights
- Vacuum heat treatment and nitride surface hardening stated
Cons
- Single bit, not a set
- No point angle stated
- No warranty term stated
- No case stated

IRONANT 5-Piece HSS Step Drill Bit Set for Metal
A 5-piece HSS step drill set with 50 hole sizes and a TiAlN coating in an aluminum case, but the listing says it is not recommended for stainless steel.
Pros
- 50 hole sizes from 5 step bits
- TiAlN coating on HSS for wear resistance
- 118 degree split-point tip for self-centering
- Aluminum carrying case, 1.0 pounds
Cons
- Not recommended for stainless steel, per the listing
- Not recommended for wood either
- No warranty term stated
- No cobalt grade stated; HSS only
Other machines to compare
NordWolf 5-Piece M35 Cobalt Stubby Drill Bit SetCheck price on Amazon
EZARC M35 Cobalt Stubby Drill Bit Set for Hard MetalCheck price on Amazon
RCINDUSCheck price on Amazon
Narwhal 3/8 Inch Drill BitCheck price on Amazon
toolant Center Drill Bit SetCheck price on Amazon
Specs compared
| Model | HQ Score | Material | Sizes | Point angle | Case | Stainless use |
|---|---|---|---|---|---|---|
| Bosch CO14B 14-Piece | 9.7/10 | M42, 8% cobalt | 1/16 to 1/2 in | Not stated | Case included | Stated |
| RCINDUS M35 20-Piece | 9.6/10 | M35, 5% cobalt | 3/16 in, 20 pcs | 135 degrees | Plastic case | Stated |
| MACXCOIP M35 13-Piece | 9.6/10 | M35 cobalt | 1/16 to 1/4 in | 135 degrees | Index case | Stated |
| Jerax M2 Step Bit | 9.6/10 | M2 HSS | 1/4 to 3/4 in | Not stated | Not stated | Up to 12ga, 2.7mm |
| IRONANT 5-Piece Step | 9.3/10 | HSS, TiAlN coated | 50 sizes | 118 degrees | Aluminum case | Not recommended |
Specs are what each manufacturer publishes as its rating on the listing, collected 6 November 2026.
What the listings tell you, and what they leave out
We read five drill bit listings for this guide. Four state stainless steel as a use, and one states plainly that it is not recommended for stainless steel. Two state a cobalt grade with a cobalt percentage, and two state a 135 degree point angle. No listing here states a warranty term.
Two listings also disagree with themselves: the Bosch set is called 14-piece while its size list names 13 sizes, and the IRONANT set promises 50 hole sizes from 5 bits while warning against stainless steel, the metal this guide is about. Read the size list, not just the headline count.
Buying guide: best drill bit for stainless steel choices
Cobalt grade
M35 and M42 are the cobalt grades here. The RCINDUS and MACXCOIP sets state M35, with the RCINDUS stating 5% cobalt, and the Bosch states M42 with 8% cobalt. The Jerax step bit states M2 HSS, and the IRONANT set states HSS with a TiAlN coating. A stated grade and cobalt percentage lets you compare bits directly; where the listing states neither, treat the material as unknown.
Point angle
A split point starts the hole where you put it and keeps the bit from walking on hard steel. The RCINDUS and MACXCOIP sets state a 135 degree split point, and the IRONANT set states a 118 degree split point. The Bosch and Jerax listings state no point angle.
Step bits or twist bits
Step bits drill several hole sizes with one bit: the Jerax covers 5 sizes from 1/4 to 3/4 inch, and the IRONANT covers 50 hole sizes with 5 bits. Twist bits come in sets: the Bosch covers 1/16 to 1/2 inch and the MACXCOIP covers 1/16 to 1/4 inch. Pick a step bit for sheet and panel work, and a twist set when you need many small sizes.
Size range and case
Check the size list against the holes you drill. The Bosch case measures 7.2 x 5.6 x 1.8 inches, and the MACXCOIP case measures 4.13 x 3.03 x 0.67 inches, so check the case against your drawer or toolbox before buying.
Stainless drilling throws sharp chips and hot bits. Wear eye protection, clamp the work so it cannot spin, keep hands clear of the bit, and let the bit cool before handling it.
Project Match
| Project | Pick | Why it fits |
|---|---|---|
| Stainless brackets and tags | Bosch CO14B 14-Piece | M42 cobalt set, 1/16 to 1/2 inch, for stainless steel and cast iron |
| Repeated 3/16 inch holes | RCINDUS M35 20-Piece | 20 pieces of 3/16 inch M35 cobalt with a 135 degree split point |
| Small holes in hard metal | MACXCOIP M35 13-Piece | 13 sizes from 1/16 to 1/4 inch in M35 cobalt |
| Large holes in sheet and panel | Jerax M2 Step Bit | 5 sizes from 1/4 to 3/4 inch, for stainless steel up to 12ga, 2.7mm thick |
| Sheet metal and aluminum | IRONANT 5-Piece Step | 50 hole sizes for sheet metal, aluminum, iron and plastic; not for stainless steel |
How the scores add up
Each bit is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a safety certification or a warranty term, so every bit here scores zero on those two criteria; the ranking comes from the other three.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Bosch CO14B 14-Piece | 9.7 | 30 | 22 | 21 | n/a | 0 |
| RCINDUS M35 20-Piece | 9.6 | 30 | 22 | 20 | n/a | 0 |
| MACXCOIP M35 13-Piece | 9.6 | 29 | 21 | 21 | n/a | 0 |
| Jerax M2 Step Bit | 9.6 | 29 | 21 | 20 | n/a | 0 |
| IRONANT 5-Piece Step | 9.3 | 18 | 20 | 19 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
How do I use a drill bit on stainless steel?
Clamp the work so it cannot spin, set the split point where you want the hole, and drill with steady pressure, letting the bit cut rather than forcing it. Clear chips often and let the bit cool before handling it.
How do I clean drill bits?
Wipe chips and dust off the bit after use and store it in its case so the cutting edges do not knock against other tools. The RCINDUS, Bosch and MACXCOIP sets come in storage cases.
Do drill bit sharpeners work?
None of the listings here mention sharpeners, so there is nothing to score. If you sharpen, follow the sharpener instructions for the point angle your bits state: 135 degrees on the RCINDUS and MACXCOIP sets, 118 degrees on the IRONANT set.
How do I choose a drill bit size?
Match the bit to the hole you need, and check the size list before buying: the Bosch set runs 1/16 to 1/2 inch, the MACXCOIP set runs 1/16 to 1/4 inch, and the Jerax step bit covers 1/4 to 3/4 inch. For a single repeated size, the RCINDUS pack gives 20 pieces of 3/16 inch.
What size drill bit do I need for a #8 screw?
The listings here state bit sizes, not screw pilot sizes. Check the screw maker instructions for the pilot hole, then pick a set that lists that size: the Bosch set lists sizes from 1/16 to 1/2 inch.
Related: the CNC tooling hub, drill bit sharpener for home use, V bit for brass engraving, V bit for woodworking, and fiber laser vs CNC mill for brass.




