Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bits for Hardened Steel (2026): 4 Picks Compared

M35 cobalt drill bit sets, from a stubby set of 6 pieces to an index set of 122 pieces, compared by size range, materials and storage.

Best Drill Bits for Hardened Steel (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Sinyeenglon 122 M35Best OverallSinyeenglon 122 M359.5/10View on Amazon
  2. 2Matework M35 Stubby 6Best Stubby SetMatework M35 Stubby 69.5/10View on Amazon
  3. 3Sinyeenglon 99 M35Big SetSinyeenglon 99 M359.7/10View on Amazon
  4. 4SEDIANAS M35 13Small SetSEDIANAS M35 139.6/10View on Amazon

Hardened steel fights back. A bit made for softwood skates across the surface, dulls fast, and leaves a hole that is off-center and rough. The job calls for a bit with the hardness and heat resistance to keep cutting where ordinary bits give up, and that is what the best drill bits for hardened steel are made to do. This guide compares cobalt sets, from a compact stubby set to a large index set, by size range, materials and storage, using only what each maker states.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall Sinyeenglon 122 M35: M35 cobalt set of 122 pieces, 1/16 to 1/2 in, hardness up to 67, up to 12 times the life of the average HSS titanium coated bit. Check price on Amazon
  • Best Stubby Set Matework M35 Stubby 6: M35 cobalt stubby set, 6 pieces, with a 1/4 in hex shank, 3/32 to 3/8 in, laser-engraved sizes. Check price on Amazon
  • Big Set Sinyeenglon 99 M35: M35 set of 99 pieces, 1/16 to 3/8 in, with a plastic index storage case. Check price on Amazon
  • Small Set SEDIANAS M35 13: M35 set of 13 pieces, 1/16 to 1/4 in, for hardened metal, stainless steel, cast iron, wood and plastic. Check price on Amazon

Machines on the list

Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 99-piece M35 high speed steel twist bit set from 1/16 inch to 3/8 inch, with a hardness figure of up to 67 and a plastic index case.

Pros

  • 99 pieces, with 16 each of 1/16 inch and 5/64 inch
  • M35 steel with hardness up to 67 stated
  • Full per-size count listed, 1/16 inch to 3/8 inch
  • Sizes printed on the lid for quick access

Cons

  • No warranty term is stated on the listing
  • No point angle is stated on the listing
  • Box measures 7.9 by 7.7 by 1.4 inches
  • Shank style is not stated on the listing
Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 13Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 cobalt set from 1/16 in. to 1/4 in., with 5% cobalt, 135-degree split points and an orange case with a size index.

Pros

  • 13 sizes from 1/16 in. to 1/4 in. cover small and mid-size holes
  • M35 high speed steel with 5% cobalt for hardened metal and stainless steel
  • 135-degree split point, self-centering to prevent walk-off
  • Orange plastic case with a size index keeps the set organized

Cons

  • Round straight shank, no flats to resist slipping in the chuck
  • No warranty term is stated in the listing
  • Largest size is 1/4 in., so larger holes need another bit
  • No shank or flute length is stated for the sizes in the set
Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon Cobalt Drill Bits Set for Hardened

Sinyeenglon9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M35 cobalt set of 122 pieces from 1/16 in to 1/2 in across 19 sizes, with hardness up to 67 and an index case with sizes printed on the lid.

Pros

  • M35 cobalt with hardness up to 67, rated to cut faster with a long life
  • Up to 12 times the life of the average HSS titanium coated bit, as the maker claims
  • 122 pieces across 19 sizes, with 30 pieces of 1/16 in and 10 pieces of 1/8 in for the sizes used most
  • Index case with sizes printed on the lid, for quick access to every size

Cons

  • No warranty term is stated
  • Hard plastic index case rather than a metal case
  • 122 pieces in the case take more storage space than the Matework set
  • Largest size stops at 1/2 in, so larger holes need another set
Matework M35 Cobalt Stubby Drill Bits Set

Matework M35 Cobalt Stubby Drill Bits Set

Matework9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An M35 cobalt stubby set of 6 pieces from 3/32 in to 3/8 in with a 1/4 in hex shank and laser-engraved sizes.

Pros

  • M35 cobalt high-speed steel with a cobalt coating for durability, corrosion resistance and heat resistance
  • Stubby length gives stability and chip evacuation for accurate cuts
  • 1/4 in hex shank with laser-engraved step sizes for clear identification
  • 6 sizes from 3/32 in to 3/8 in for steel, carbon steel, iron, copper, aluminum, wood and plywood

Cons

  • No warranty term is stated
  • 6 pieces cover fewer sizes than the larger sets in this guide
  • Short stubby length suits shallow holes rather than deep drilling
  • 1/4 in hex shank needs a chuck that accepts a hex shank

Other machines to compare

Specs compared

Model HQ Score Material Size range Pieces Shank Case
Sinyeenglon 122 M35 9.5/10 M35 cobalt HSS 1/16 to 1/2 in 122 Not stated Index case
Matework M35 Stubby 6 9.5/10 M35 cobalt HSS 3/32 to 3/8 in 6 1/4 in hex Not stated
Sinyeenglon 99 M35 9.7/10 M35 HSS 1/16 to 3/8 in 99 Not stated Index case
SEDIANAS M35 13 9.6/10 M35 HSS 1/16 to 1/4 in 13 Not stated Not stated

Specifications are manufacturer rated, as published by each maker and collected 15 November 2026.

Most drill bit sets are not made for hardened steel

Most drill bit sets on a shelf are made for wood and mild steel, and they dull quickly on hardened stock. Cobalt changes the picture: the maker of the Sinyeenglon set lists M35 cobalt with hardness up to 67, and claims up to 12 times the life of the average HSS titanium coated bit. A set without cobalt has no place at the top of a hardened steel ranking, so every pick here is an M35 set.

Buying guide: best drill bits for hardened steel

Match the bit to your material

Start from the metal in front of you. Stainless steel, cast iron, titanium and aluminum all appear in the Sinyeenglon set of 122 pieces, and the Matework set adds carbon steel, iron and copper. If your work mixes metal with wood and plywood, the Matework set names those materials too.

Size range matters more than piece count

A large piece count looks generous, but the size range decides what you can drill. The set of 122 pieces runs from 1/16 in to 1/2 in across 19 sizes, with extra pieces in the sizes a shop reaches for most, including 30 pieces of 1/16 in and 10 pieces of 1/8 in. The set of 99 pieces runs from 1/16 in to 3/8 in. The set of 13 pieces runs from 1/16 in to 1/4 in. Pick the range that covers the holes you drill, then let the piece count follow.

Stubby vs jobber length

Length is a trade. The Matework set is a stubby set, and the maker lists stability and chip evacuation as its strengths, with a 1/4 in hex shank for a quick-change chuck. The Sinyeenglon sets are jobber-length twist bits in index cases, made for reaching into deeper work. Short bits suit shallow holes and tight spaces; jobber bits suit deeper holes and a wider range of setups.

Storage and identification

Loose bits dull each other and go missing. The set of 122 pieces comes in a hard plastic index case with the sizes printed on the lid, and the case measures 9.84 x 8.07 x 1.85 in. The set of 99 pieces comes in a plastic index storage case. The Matework set marks each bit with a laser-engraved size, so the size stays readable in use.

Where you will drill

Hardened steel drilling throws hot chips, so eye protection and a clamped workpiece belong in every setup, and the bit needs cooling time between holes. A bench setup suits the index sets, with the case open and sizes at hand. A stubby set suits a drill press or a hand drill in tight quarters, where a short bit keeps the setup compact.

Safety

Drilling hardened steel throws hot chips and heats the bit. Wear eye protection, clamp the work before drilling, and let the bit cool between holes. Never drill with a loose workpiece, and keep hands clear of the cutting edge.

Project Match

  • Stainless steel and hardened metal: Sinyeenglon set of 122 pieces, M35 cobalt with hardness up to 67.
  • Cast iron, titanium and aluminum: Sinyeenglon set of 122 pieces, which names cast iron, titanium and aluminum.
  • Wood and plywood alongside metal: Matework stubby set, which names wood and plywood with steel, carbon steel, iron, copper and aluminum.
  • Small holes in hardened metal and stainless steel: SEDIANAS set of 13 pieces, 1/16 to 1/4 in.
  • A wide size spread for a shop: Sinyeenglon set of 99 pieces, 99 pieces from 1/16 to 3/8 in.

How the scores add up

Each set is scored on performance, build, value, safety and warranty, with the weights published on the method page. A spec the maker does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Sinyeenglon 122 M35 9.5 32 22 21 0 0
Matework M35 Stubby 6 9.5 30 21 20 0 0

HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher.

FAQ: lasers and CNC

What is the best drill bit for hardened steel?

An M35 cobalt bit, because cobalt holds hardness and heat resistance where ordinary high-speed steel dulls. In this guide the Sinyeenglon set of 122 pieces leads on size range, piece count and stated hardness, with M35 cobalt rated up to 67 and up to 12 times the life of the average HSS titanium coated bit, as the maker claims.

Are cobalt drill bits needed for hardened steel?

Cobalt is the material every set in this guide uses, and the makers tie it to hardened metal, stainless steel and cast iron. A plain high-speed steel bit can drill mild steel and wood, but the makers here point to M35 cobalt for hardened stock, where heat and hardness wear a plain bit down fast.

What sizes work for hardened steel?

That depends on the holes you drill. The sets here run from 1/16 in at the small end to 1/2 in at the large end, with the set of 122 pieces covering 19 sizes in that range. Match the set to the largest hole you drill, since a set that stops at 1/4 in leaves larger holes uncovered.

Are stubby drill bits better for hardened steel?

Stubby bits trade reach for stability. The Matework stubby set lists stability and chip evacuation as strengths, and its 1/4 in hex shank suits a quick-change chuck. For shallow holes and tight spaces, that stability helps; for deeper holes, a jobber-length set reaches further.

Which of these sets have a written warranty?

None of the sets in this guide states a warranty term. The makers state sizes, materials and case details, and no warranty term is stated for any of them.

Related: Best Metal Drill Bit (2026): 5 Sets for Steel and Sheet Metal, Drill Bit Types for Metal: Which to Use and When, What Is the Best Drill Bit for Hardened Steel? and Best End Mill for Steel: 4 CNC Bits Compared (2026).

More buying guides

CNC Tooling ·

Best Drill Bits for Drilling Steel (2026)

M35 cobalt and titanium-coated drill bit sets for hardened metal, stainless steel and cast iron, compared by sizes, shank, coating and warranty.