Types of Drill Bits and What Each One Does
A plain guide to the main types of drill bits, what each one cuts, and how to match the bit, shank and size to the material.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cobalt Drill Bit Set9.7/10View on Amazon - 2
DEWALT Drill Bit Set9.6/10View on Amazon - 3
GMTOOLS 30 Pcs Titanium Impact Drill Bit Set9.5/10View on Amazon
Types of drill bits cover a small set of shapes, and each shape suits a different material and a different kind of hole. A twist bit bores a round hole in wood, metal or plastic. A brad point bit starts clean holes in wood. A spade bit cuts wide, flat-bottomed holes. A masonry bit handles brick and concrete, and a hole saw cuts large round openings. The sections below explain each type, the shank that holds it, and how to match the bit to the material.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Types of drill bits at a glance
The table below sums up the main types, the material each one suits, and a stated detail from the listings used for this guide.
| Bit type | Suits | Stated detail |
|---|---|---|
| Twist bit | Wood, metal, plastic | High speed steel, 135-degree split point |
| Brad point bit | Wood | 17 bits in a 246-piece set |
| Spade bit | Wood | 4 bits in a 246-piece set |
| Masonry bit | Masonry, cement | 21 bits in a 246-piece set |
| Hole saw | Wood, metal, plastic | 4 saws in a 100-piece set |
Twist bits: the general-purpose shape
The twist bit is the default drill bit for most holes. DEWALT lists a 29-piece high speed steel set with a 135-degree split point tip, a black oxide coating and a tapered web, made for plastic, wood and metal. The split point shape helps the bit start on the mark instead of walking, and size markings on the shank identify each bit.
CaRoller lists a 29-piece high speed steel set in sizes from 1/16 inch to 1/2 inch, also with a 135-degree split point and a black oxide finish. The maker lists cast iron, high temperature alloy, titanium alloy, hard plastics and wood among the materials it drills, and notes it is not recommended for hardened steel or stainless steel. For plastic, the maker advises lower speeds, below 500 RPM, to prevent melting.
Brad point and spade bits for wood
Brad point bits and spade bits are wood bits. A brad point bit has a sharp center point that marks the hole before the cutting edges engage. The COMOWARE 246-piece (on Amazon) set lists 17 brad point drill bits alongside 57 high speed steel titanium drill bits and 30 high speed steel black oxide twist drill bits. The same set lists 4 spade drill bits for wide, flat-bottomed holes. The Forstner drill bit guide covers a related wood bit that cuts flat-bottomed holes with a cleaner rim.
Masonry bits and hole saws
Masonry bits cut brick, block and cement, materials that dull a plain twist bit fast. The COMOWARE 246-piece set lists 21 masonry drill bits and 4 drill stoppers for setting depth. A hole saw cuts a large round opening instead of a solid hole, and it suits wood, metal and plastic. The Amazon Basics 100-piece (on Amazon) set lists 4 hole saws among its 52 bits, 8 nut sockets and magnetic bit holder, and the COMOWARE set lists 4 hole saws with 1 arbor adapter.
Screwdriver bits and nut drivers
Most drill bit sets also carry driver bits. The CRAFTSMAN 140-piece (on Amazon) set lists 21 drill bits, 97 1-inch bit tips, 15 2-inch power bits, 5 nut drivers, 1 socket adapter and 1 magnetic bit holder, with a storage case. The DEWALT 100-piece FlexTorq set lists 14 drill bits with 15 torx bits, 35 PH bits, 17 SQ bits and 14 SL bits. The DEWALT 40-piece set lists a magnetic screw lock sleeve, long screwdriver bits and nutsetters, with a 3 Year Limited Warranty. A set heavy on driver bits suits assembly and repair work; a set heavy on twist bits suits drilling.
Shank types and fit
The shank is the end of the bit that the chuck grips, and it decides which tools the bit fits. The DEWALT 29-piece set uses a straight shank with 3 flats to reduce spin-out in the chuck, and it fits standard drill chucks. The CRAFTSMAN set uses industry-standard hex shanks, listed as compatible with nearly all major brands of drills and impact drivers. The DEWALT 40-piece set includes a 1/4 bit set and a magnetic bit holder for quick changes. The drill bit shank types guide explains the sizes and which chuck each one fits.
Sizes: how to read a set
The sets in this guide list bit sizes in fractions of an inch, and a set lists its range on the case. The CaRoller 29-piece set runs from 1/16 inch to 1/2 inch, with the size marked on each bit. The DEWALT 45-piece set lists 55mm double-ended bits in a count of 8 and 88mm power bits, a PH2 and an SL2. The DEWALT 29-piece set marks sizes on the shank. The drill bit chart shows the number, letter and fraction sizes side by side.
Matching the bit to the material
Match the bit to the material before matching it to the hole size:
- Wood: brad point bits for clean holes, spade bits for wide holes, twist bits for general drilling.
- Metal: high speed steel twist bits with a 135-degree split point. The drill bit types for metal guide compares the options for steel and sheet metal.
- Plastic: high speed steel twist bits at lower speeds; the CaRoller set advises below 500 RPM to prevent melting.
- Masonry and cement: masonry bits, with a drill stopper where the depth matters.
- Large round openings: hole saws with the matching arbor adapter.
For hardened steel, the CaRoller maker notes its set is not recommended, so use a bit rated for that material.
Care and storage
Bits last longer when they stay dry, sharp and sorted. The DEWALT sets in this guide ship in a storage case with a clear lid and a clip latch, and the DEWALT bit-bar design allows easy removal and customizable placement. Keep the case closed between jobs so bits do not mix, and wipe off dust before putting a bit away. A dull bit runs hot and wanders, so read the drill bit sharpener guide before the edge goes blunt.
Common mistakes to avoid
- Using a wood bit on masonry, which dulls the edge fast.
- Running a twist bit in plastic at full speed, which can melt the material.
- Picking a set by piece count alone instead of checking the drill bit count.
- Forgetting the shank: a bit that does not fit the chuck is no use.
- Storing loose bits in a drawer, where the cutting edges nick each other.
Types of drill bits: the short version
- Twist bits drill round holes in wood, metal and plastic.
- Brad point bits start clean holes in wood.
- Spade bits cut wide, flat-bottomed holes in wood.
- Masonry bits cut brick, block and cement.
- Hole saws cut large round openings.
- Screwdriver bits and nut drivers handle fasteners, not holes.
- Check the shank, the size range and the material before ordering.
FAQ: lasers and CNC
What drill bit should a beginner buy first?
A high speed steel twist bit set is the usual starting point: the DEWALT 29-piece set is listed for plastic, wood and metal with a 135-degree split point, and the CaRoller 29-piece set runs from 1/16 inch to 1/2 inch.
Can the same bit drill wood and metal?
A high speed steel twist bit can: DEWALT lists its 29-piece set for plastic, wood and metal, and the 135-degree split point helps it start cleanly on metal. Wood-only bits such as brad point and spade bits are not listed for metal.
What is a brad point bit for?
A brad point bit drills clean holes in wood: its sharp center point marks the hole and keeps the bit from wandering, which suits dowel holes and furniture work. The COMOWARE 246-piece set lists 17 brad point drill bits.
Do I need a special bit for masonry?
Masonry needs a masonry bit, built for brick, block and cement. The COMOWARE 246-piece set lists 21 masonry drill bits and 4 drill stoppers for setting depth.
How do I keep drill bits sharp?
Store bits in their case so the edges do not nick each other, wipe them clean after use, and sharpen a dull edge before it runs hot. The drill bit sharpener guide explains how to sharpen drill bits.
Related: the CNC tooling hub, drill bit types for metal and best drill bit for drilling metal.




