Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bits for Aluminum (2026): 4 Compared

4 drill bit sets for aluminum compared by material, size range, coating, shank and storage case.

Best Drill Bits for Aluminum (2026): 4 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1LingGan M35 Cobalt SetBest OverallLingGan M35 Cobalt Set9.6/10View on Amazon
  2. 2IRONANT Step Drill SetBest Step BitsIRONANT Step Drill Set9.6/10View on Amazon
  3. 3IRONANT 5-Pc Step SetMost SizesIRONANT 5-Pc Step Set9.6/10View on Amazon

A clean hole in an aluminum bracket, a row of holes in a sheet panel, a part that fits without rework: the best drill bits for aluminum cut without grabbing or leaving a rough edge. Aluminum is soft and gummy, so the bit matters more than the drill.

This guide compares 4 bit sets by material, size range, coating and shank, using only what each listing publishes.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall LingGan M35 Cobalt Set: M35 HSS with 5% cobalt, 13 sizes from 1.5 to 6.5mm. Check price on Amazon
  • Best Step Bits IRONANT Step Drill Set: 28 sizes in 3 step bits, titanium coating and a 118° split point tip. Check price on Amazon
  • Most Sizes IRONANT 5-Pc Step Set: 50 sizes in 5 spiral flute step bits with an aluminum case. Check price on Amazon

Machines on the list

Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCS

Metric Cobalt Drill Bits Set 1.5-6.5mm 13PCS

LingGan9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-piece M35 HSS cobalt drill bit set in 1.5 to 6.5mm with a straight shank, for stainless steel, iron, copper and aluminum.

Pros

  • M35 HSS with 5% cobalt for wear resistance
  • 13 sizes from 1.5 to 6.5mm for varied holes
  • Lists stainless steel, iron, copper and aluminum
  • Heat resistant for high-temperature work

Cons

  • No warranty term is stated
  • No case or storage is stated
  • No point angle is stated
  • No coating is stated beyond the cobalt steel
IRONANT 3PCS HSS Step Drill Bit Set for Metal

IRONANT 3PCS HSS Step Drill Bit Set for Metal

IRONANT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece HSS step drill set with a titanium coating, 118° split point tip and dual-flute design, covering 28 sizes.

Pros

  • 28 sizes across 3 step bits, from 1/8 to 3/4 in
  • Titanium coating with a 118° split point tip
  • Dual-flute design clears chips faster and prevents walking
  • Portable bag included for storage

Cons

  • No warranty term is stated
  • Not recommended for stainless steel and wood
  • No shank type is stated
  • 3 bits cover 28 sizes, so one damaged bit loses many sizes
IRONANT 5PCS Spiral Flute Titanium HSS Step Drill

IRONANT 5PCS Spiral Flute Titanium HSS Step Drill

IRONANT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-piece titanium-coated HSS step bit set with 50 sizes and a spiral dual-flute design, made for sheet metal.

Pros

  • 50 sizes in 5 pieces, for many hole sizes from one cased set
  • 118 degree split point tip that centers on its own and resists walking
  • Spiral dual-flute design clears chips faster and lets particles escape, per the maker
  • Aluminum case keeps the 5 step bits organized

Cons

  • Not recommended for stainless steel or harder metal, per the maker
  • No warranty term is stated
  • Titanium-coated HSS, not cobalt steel, so hard metal is outside its stated use
  • Made for sheet metal and thin materials, so thick stock is outside its stated use
Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 15Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15-piece M35 cobalt steel twist bit set from 1/16 inch to 3/8 inch, with 5% cobalt and a 135 degree split point.

Pros

  • M35 steel with 5% cobalt stated
  • 135 degree split point, self-centering
  • 15 pieces from 1/16 inch to 3/8 inch, with spares at 1/16, 5/64 and 3/32 inch
  • Index storage case with size index

Cons

  • No warranty term is stated on the listing
  • 15 pieces, fewer than the 99-piece sets
  • No hardness figure is stated

Other machines to compare

Specs compared

Bit set HQ Score Type Sizes Material For aluminum Case
LingGan M35 Cobalt Set 9.6/10 Twist, straight shank 13 sizes, 1.5-6.5mm M35 HSS, 5% cobalt Yes, listed Not stated
IRONANT Step Drill Set 9.6/10 Step, titanium coated 28 sizes, 1/8 to 3/4 in HSS, titanium coating Yes, listed Portable bag
IRONANT 5-Pc Step Set 9.6/10 Step, spiral flute 50 sizes HSS, TiAlN Yes, listed Aluminum case
SEDIANAS Cobalt 15-Pc 9.6/10 Twist, straight shank 15 pcs, 1/16-3/8 in M35 HSS Not stated Index storage case

Size and performance figures are the brand’s ratings quoted from listings on 15 November 2026.

What the listings tell you

Every set here lists aluminum among its materials, and every set lists a straight or step bit form for sheet metal. The LingGan set lists M35 HSS with 5% cobalt in 13 sizes from 1.5 to 6.5mm, and the IRONANT step set lists 28 sizes across 3 bits with a titanium coating. The step bits list a 118° split point tip and a dual-flute design on the 3-piece set, while the twist sets list straight shanks. The SEDIANAS set lists an index storage case, and the IRONANT step sets list a portable bag and an aluminum case. The other 2 sets give sizes and coatings with no further details published.

Buying guide: the best drill bits for aluminum

Cobalt or titanium coating

Cobalt HSS holds an edge in hard metal, and titanium coating adds surface hardness to HSS. The LingGan set lists M35 HSS with 5% cobalt, and the SEDIANAS set lists M35 HSS twist bits. The IRONANT step sets list a titanium coating, with the 5-piece set adding TiAlN. The LingGan set also lists heat resistance for high-temperature work. For aluminum, either material works; pick cobalt where the same bits will also drill stainless steel and iron.

Twist bits or step bits

Twist bits drill one size per bit, and step bits drill many sizes with one bit. The LingGan and SEDIANAS sets are twist bits in 13 and 15 sizes, while the IRONANT sets are step bits: 28 sizes across 3 bits, and 50 sizes across 5 bits. Step bits suit sheet metal, where one bit can open a hole in stages. Twist bits cover the small sizes from 1.5 to 6.5mm and 1/16 to 3/8 in. The 3-piece step set also lists a portable bag, and the 5-piece step set lists an aluminum case, so both step sets travel with their bits. The LingGan set lists easy portability and convenient use and storage.

Size range and shank

Size range decides which holes the set can drill. The LingGan set runs 1.5 to 6.5mm, the SEDIANAS set runs 1/16 to 3/8 in, and the IRONANT step bits run 1/8 to 3/4 in across their steps. Both twist sets list a straight shank for a mechanical or hand drill. The LingGan set lists sizes from 1.5 to 6.5mm, which suits small holes, while the step bits open holes up to 3/4 in. Check the shank and the size range against the holes the project needs. See drill bit shank types for shank sizes and compatibility.

Cutting fluid and chip clearing

Aluminum sticks to bits, so fluid and chip clearing matter. The IRONANT step set lists a dual-flute design that clears chips faster and a 118° split point tip that centers itself and prevents walking. The LingGan set lists heat resistance for high-temperature work. The SEDIANAS set lists no fluid or chip clearing details, so the same fluid and brush habits apply. For fluid picks, see the best metal tapping fluid and the best aluminum cutting fluid.

Safety

Clamp the work, wear eye protection, and keep hands clear of the bit. Let the bit cut without forcing it, and clear chips with a brush, not fingers.

Project Match

  • Aluminum sheet panels: the IRONANT step sets, listed for sheet metal and aluminum.
  • Small holes in aluminum, steel and iron: the LingGan cobalt set, 1.5 to 6.5mm.
  • Hardened metal and stainless steel: the SEDIANAS cobalt set, M35 HSS.
  • Plastic and sheet metal: the IRONANT step sets, listed for plastic and sheet metal.
  • General drilling in wood and plastic: the SEDIANAS set, listed for wood and plastic.

How the scores add up

Each bit set is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing. No listing here states a warranty term or a safety certification. How we pick explains the weights.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
LingGan M35 Cobalt Set 9.6 30 21 21 n/a 0
IRONANT Step Drill Set 9.6 29 20 20 n/a 0

We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.

FAQ: lasers and CNC

What drill bits work best for aluminum?

Cobalt HSS twist bits and titanium-coated step bits both list aluminum among their materials. The LingGan set lists M35 HSS with 5% cobalt, and the IRONANT step sets list a titanium coating. Step bits suit sheet metal, where one bit opens a hole in stages.

Do I need cobalt bits for aluminum?

Not for aluminum alone. Cobalt HSS suits hard metals as well, so the LingGan and SEDIANAS sets cover stainless steel, iron and cast iron alongside aluminum.

What sizes do these drill bit sets cover?

The LingGan set covers 1.5 to 6.5mm in 13 sizes, the SEDIANAS set covers 1/16 to 3/8 in in 15 pieces, and the IRONANT step sets cover 28 and 50 sizes from 1/8 to 3/4 in.

Can step drill bits drill aluminum?

Yes. Both IRONANT step sets list aluminum among their materials, and the 3-piece set lists a 118° split point tip with a dual-flute design that clears chips faster.

What shank do these drill bits have?

The LingGan and SEDIANAS twist sets list a straight shank. The IRONANT step sets state no shank type.

Related: best drill bit for drilling metal, best drill bits for drilling steel, drill bit types for metal, drill bit shank types and the CNC tooling hub. Also see our best metal drill bit.

More buying guides

CNC Tooling ·

Best Drill Bits for Drilling Steel (2026)

M35 cobalt and titanium-coated drill bit sets for hardened metal, stainless steel and cast iron, compared by sizes, shank, coating and warranty.