Drill Bit Types for Metal: Which to Use and When
M35 cobalt, titanium nitride and black oxide drill bits compared for metal: which type suits hardened metal, stainless steel and general-purpose holes.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Cobalt Drill Bit Set - 115Pcs M35 HiSS Bits9.7/10View on Amazon - 2
MACXCOIP 29Pcs(1/16"-1/2")9.6/10View on Amazon - 3
DEWALT Drill Bit Set, 21 Pc. Titanium Nitride9.6/10View on Amazon - 4
DEWALT Drill Bit Set, 21 Pc High Speed Steel9.6/10View on Amazon
A bracket that needs holes in steel, and the drill bit types for metal question decides which bit cuts cleanly instead of skating across the surface. The short answer: cobalt bits suit hardened metal, stainless steel and cast iron, titanium nitride coated bits suit wood, metal and plastic, and black oxide high speed steel bits suit general-purpose drilling in metal and wood. The sections below sort the types by metal, then match each set to the job it handles.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Cobalt Drill Bit Set - 115Pcs M35 HiSS Bits
A 115-piece M35 cobalt set covering fractional, letter and numbered sizes for hardened metal and stainless steel, in a metal index box.
Pros
- 115 pieces: 29 fractional, 26 letter and 60 numbered sizes
- M35 cobalt, 5% cobalt, for heat resistance and hardness
- 135 degree split point tip, self-centering to prevent walk-off
- Fully ground twist design for cooler drilling
Cons
- No warranty term is stated
- No item weight is stated in the spec table
- No dimensions are stated for the metal index box
- No drilling speed guidance is stated in the listing

MACXCOIP 29Pcs(1/16"-1/2")
A 29-piece M35 cobalt jobber-length set from 1/16 to 1/2 inch for hardened metal and stainless steel, in an index storage case.
Pros
- 29 sizes from 1/16 inch to 1/2 inch in one set
- M35 cobalt for stainless steel, iron castings, copper and aluminum
- 135 degree point tip, self-centering to prevent walk-off
- Drill holders with size indexes for storage and sorting
Cons
- No warranty term is stated
- No item weight is stated in the spec table
- No letter or numbered sizes, only fractional sizes
- No case material is stated

DEWALT Drill Bit Set, 21 Pc. Titanium Nitride
A 21-piece titanium nitride coated set with pilot point tips from 1/16 to 1/2 inch, in a tough case.
Pros
- Titanium nitride coating with pilot point for longer life
- Starts on contact for cleaner holes, no-spin shanks
- Tapered web for greater durability to reduce breaking
- 21 pieces from 1/16 inch to 1/2 inch in a plastic tough case
Cons
- The listing names wood, metal and plastic, not hardened metal
- The warranty term is only 30 days
- No point angle is stated for the pilot point
- No letter or numbered sizes, only fractional sizes

DEWALT Drill Bit Set, 21 Pc High Speed Steel
A 21-piece high speed steel set with black oxide coating, 135 degree split point tips and a 31 degree helix for general-purpose drilling.
Pros
- 135 degree split-point tips drill on contact and prevent walking
- Black oxide coating helps resist corrosion and increase durability
- 31 degree helix for deep holes, parabolic flute for chip ejection
- 21 pieces from 1/16 inch to 1/2 inch for metal and wood
Cons
- No warranty term is stated
- No storage case is stated
- The listing names general-purpose drilling, not hardened metal
- No letter or numbered sizes, only fractional sizes
Which drill bit for which metal
Cobalt comes first for hard metal. The MACXCOIP set lists M35 cobalt for hardened metal, stainless steel, iron castings, copper, aluminum and other soft metals. The SEDIANAS set lists M35 cobalt for hardened metal, stainless steel, cast iron, high temperature alloy and titanium alloy, and states Cobalt 5% in M35 high speed steel. Both cobalt sets list a 135 degree split point tip that self-centers to prevent walk-off.
Titanium nitride and black oxide cover the rest. The DEWALT DW1361 (on Amazon) set lists a titanium nitride coating with a pilot point that starts on contact for cleaner holes and no-spin shanks, for wood, metal and plastic. The DEWALT DWA1181 (on Amazon) set lists black oxide coating, a 135 degree split point and a 31 degree helix, for general-purpose drilling in metal and wood.
Sizes: fractional, letter and numbered
All 4 sets cover fractional sizes from 1/16 inch to 1/2 inch. The DEWALT sets list 21 pieces each, the MACXCOIP set lists 29 pieces, and the SEDIANAS set lists 29 fractional sizes, 26 letter sizes from A to Z and 60 numbered sizes from #1 to #60. Only the SEDIANAS set has letter and numbered sizes.
The gear
The sets below cover the drilling step: cobalt for hardened metal and stainless steel, titanium nitride for general metal work, and black oxide for general-purpose holes.
How to choose the best drill bit types for metal
Match the set to the metal first, then to the sizes. For hardened metal, stainless steel or cast iron, pick an M35 cobalt set. For wood, metal and plastic, the DEWALT DW1361 titanium nitride set covers the same fractional range in a tough case. For general-purpose holes in metal and wood, the DEWALT DWA1181 black oxide set covers the same range. See the CNC tooling hub, the best drill bit for stainless steel picks and the drill bits for CNC guide.
Check the case and the warranty before ordering. The DW1361 lists a plastic tough case and a 30 Day Money Back Guarantee, the MACXCOIP set an index storage case, and the SEDIANAS set a metal index storage box. The DWA1181 listing states no case and no warranty term.
FAQ: lasers and CNC
What drill bit is best for stainless steel?
An M35 cobalt bit. The MACXCOIP set lists M35 cobalt for stainless steel, iron castings, copper and aluminum, and the SEDIANAS set lists M35 cobalt for stainless steel, cast iron and titanium alloy.
What is the difference between cobalt and titanium nitride drill bits?
Cobalt bits are made for hard metal. The M35 cobalt sets list hardened metal, stainless steel and cast iron, while the DEWALT DW1361 lists a titanium nitride coating with a pilot point for wood, metal and plastic. Pick cobalt for hardened metal and titanium nitride for general metal work.
What does a 135 degree split point do?
It drills on contact and self-centers to prevent walk-off. The MACXCOIP, SEDIANAS and DEWALT DWA1181 listings all state a 135 degree split point or tip.
How many drill bit sizes do I need?
The DEWALT sets list 21 pieces each from 1/16 inch to 1/2 inch, the MACXCOIP set lists 29 pieces, and the SEDIANAS set lists 115 pieces covering fractional, letter and numbered sizes.
Do these drill bit sets come with a case?
The DW1361 lists a plastic tough case, the MACXCOIP set an index storage case, and the SEDIANAS set a metal index storage box. The DWA1181 listing states no case.
Related: the CNC tooling hub, best drill bit for stainless steel, drill bits for CNC and end mill vs drill bit for CNC.




