Drill Bit Sharpener Guide: How to Sharpen Drill Bits
A drill bit sharpener guide that matches the point angle to the bit, sizes the sharpener to the bit, and grinds both sides evenly.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Drill Doctor 500X Drill Bit Sharpener for 3/329.6/10View on Amazon - 2
Drill Bit Sharpener for 4-1/2" & 5" Angle9.5/10View on Amazon - 3
SMARTANG Drill Bit Sharpener Attachment9.5/10View on Amazon - 4
General Tools Drill Grinding Attachment #8259.5/10View on Amazon
A drill bit sharpener restores a dull bit by grinding a fresh point at a set angle, and the drill bit sharpener guide below walks through matching the angle, picking the sharpener and grinding the point evenly. A split point helps a sharp bit start a hole where it is placed, with less walking.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Drill Doctor 500X Drill Bit Sharpener for 3/32
A plug-in sharpener for 3/32 to 1/2 inch twist and masonry bits, with 118 and 135 degree angles and a preinstalled 180 grit diamond wheel.
Pros
- Sharpens 3/32 to 1/2 inch twist and masonry bits
- 118 and 135 degree angles for general purpose work and harder materials
- Split point sharpening with a Push to Stop port
- Handles carbide, cobalt, high speed steel and masonry bits
Cons
- Optional 3/4 inch chuck is available separately
- Only 118 and 135 degree angles
- Measures 13.75 x 5.75 x 11.75 inches
- The 6 foot cord limits where the sharpener sits

Drill Bit Sharpener for 4-1/2" & 5" Angle
An angle grinder attachment with 20 guide holes for 2 to 13 mm bits at a 118 degree angle, for 4-1/2 and 5 inch grinders.
Pros
- 20 guide holes cover 2 to 13 mm bits
- 118 degree angle for repeatable sharpening
- Clamps onto 115 and 125 mm angle grinders
- High-strength molded body
Cons
- Needs an angle grinder, which is not included
- Only a 118 degree angle is stated
- Guide holes are fixed sizes
- Bits outside 2 to 13 mm do not fit

SMARTANG Drill Bit Sharpener Attachment
An angle grinder attachment that sharpens 1/8 to 1/2 inch bits, 3 to 12.5 mm, at 118 degrees on 4-1/2 and 5 inch grinders.
Pros
- Sharpens 1/8 to 1/2 inch bits, 3 to 12.5 mm
- Mounts on 4-1/2 and 5 inch angle grinders
- High-strength plastic body with copper nuts and aluminum screws
- Stable guide and a 118 degree angle
Cons
- Needs an angle grinder, which is not included
- Only a 118 degree angle is stated
- Fits only 115 and 125 type angle grinders
- No warranty term is stated

General Tools Drill Grinding Attachment #825
A drill grinding attachment with a pivoting neck and adjustable angles of 88, 68, 59, 49 and 41 degrees, for large and small bits.
Pros
- Pivoting neck sharpens both sides of the bit equally
- Adjustable angles of 88, 68, 59, 49 and 41 degrees
- Non-marking depth stop-cap protects the material surface
- Vice clamp mount
Cons
- Stated angles are 88, 68, 59, 49 and 41 degrees
- Measures 4.91 x 4.91 x 7.38 inches
- It mounts with a vice clamp
- No warranty term is stated
Step 1: Match the angle to the bit
The point angle decides how the bit cuts. The Drill Doctor sharpens at 118 degrees for general purpose work and 135 degrees for harder materials, and the General Tools attachment (on Amazon) adjusts across 88, 68, 59, 49 and 41 degrees. The Generic attachment holds a fixed 118 degree angle, and the SMARTANG attachment (on Amazon) lists a 118 degree grinding angle. The drill bit types for metal guide covers which bit suits each material.
Step 2: Pick the sharpener that fits your bits
The Drill Doctor handles twist and masonry bits from 3/32 to 1/2 inch. The SMARTANG attachment sharpens bits from 1/8 inch to 1/2 inch, or 3 to 12.5 mm, and the Generic attachment covers 2 to 13 mm with 20 guide holes. The Drill Doctor lists carbide, cobalt and masonry bits.
Step 3: Set up and sharpen
The Drill Doctor is a plug-in machine with a 1/2 inch chuck, a 180 grit diamond wheel and a 6 foot power cord. The SMARTANG and Generic attachments mount on 4-1/2 and 5 inch angle grinders and turn the grinder into a sharpening station. The General Tools attachment mounts with a vice clamp.
A bit cuts true only when both sides of the point match. The General Tools attachment uses a pivoting neck to sharpen both sides equally, and the Drill Doctor adds split point sharpening with a Push to Stop port. Match each bit to its hole on the Generic attachment.
The gear: drill bit sharpeners for the shop
The sharpeners below handle the angles and sizes in the steps above.
Common mistakes to avoid
- Grinding at the wrong angle: 118 degrees suits general purpose work, while 135 degrees suits harder materials.
- Using the wrong guide hole: match the bit to its hole.
- Forgetting the grinder: the SMARTANG and Generic attachments mount on a 4-1/2 or 5 inch angle grinder, which is not in the box.
- Using the wrong angles: the General Tools attachment states 88, 68, 59, 49 and 41 degrees, and the maker says it can match the point angle of nearly any bit, so set the angle to match the bit.
- Expecting the optional chuck in the box: the 3/4 inch chuck for the Drill Doctor is available separately.
Drill bit sharpener guide: the short version
- Match the angle to the bit: 118 degrees for general purpose work, 135 degrees for harder materials.
- Pick a sharpener that fits the bit size and material.
- Set the sharpener up on the bench or on the grinder.
- Sharpen both sides evenly.
FAQ: lasers and CNC
What angle should I sharpen a drill bit to?
Use 118 degrees for general purpose work and 135 degrees for harder materials. The General Tools attachment adjusts across 88, 68, 59, 49 and 41 degrees.
Can I sharpen masonry bits?
Yes. The Drill Doctor and the SMARTANG attachment both list masonry bits.
Do I need a separate sharpener or an angle grinder attachment?
A plug-in sharpener such as the Drill Doctor works on its own, with a chuck, a diamond wheel and a power cord in the box. An attachment mounts on a 4-1/2 or 5 inch angle grinder and needs that grinder to work.
What size bits can these sharpeners handle?
The Drill Doctor handles 3/32 to 1/2 inch bits. The SMARTANG covers 1/8 to 1/2 inch, or 3 to 12.5 mm, and the Generic covers 2 to 13 mm with 20 guide holes.
Related: the best drill bit sharpener for home use, best countersink drill bit set for wood and how to use a Forstner drill bit guides.




