Drill Bit Shank Types: Sizes and Compatibility
A guide to drill bit shank types: what a shank does, how the 1/4-inch hex shank fits impact drivers and drills, and the sizes in 4 hex shank sets.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
GMTOOLS 30 Pcs Titanium Impact Drill Bit Set9.5/10View on Amazon - 2
DEWALT 12 Pc Black and Gold Drill Bit Set9.5/10View on Amazon - 3
amoolo Hex Shank Impact Drill Bit Set, 1/16"-1/4"9.5/10View on Amazon - 4
19 Pcs HSS Titanium Twist Drill Bit Set9.5/10View on Amazon
Drill bit shank types come down to the end of the bit that the tool grips. The shank decides which tools the bit fits and how firmly it locks in, so matching the shank to the tool matters as much as picking the right bit size. The sets in this guide all use the same shank type, a hex shank built for quick-change chucks on impact drivers and drills, and the sections below show how it works, which tools take it and which sizes each set covers.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

GMTOOLS 30 Pcs Titanium Impact Drill Bit Set
A 30-piece titanium HSS hex shank set from 1/16 to 1/2 inch, with a 135-degree split point and a storage box with a size index.
Pros
- 30 pieces covering 1/16 to 1/2 inch, the widest range here
- 135-degree split point for easy drilling with less pressure
- Double U shape flutes clear chips and cut friction and heat
- 1/4-inch hex shank locks into the chuck without slipping
Cons
- A 30-piece set is the most to sort and store
- The storage box adds bulk when carrying a few bits to a job
- No backup pieces are stated for the common sizes
- 30-day money back only, with no longer term stated

DEWALT 12 Pc Black and Gold Drill Bit Set
A 12-piece black and gold impact-ready set for metal, plastic and wood, with a 135-degree split point and a 1/4-inch hex shank.
Pros
- Black and gold finish helps prevent rust for long bit life
- 135-degree split point on 1/8 inch and larger sizes reduces walking
- Strong tapered core and tapered web resist breakage
- Impact-ready 1/4-inch hex shank resists axial torque with impact drivers
Cons
- 12 pieces, the smallest set here
- Split point only on 1/8 inch and larger sizes
- No warranty term is stated
- No backup pieces are stated

amoolo Hex Shank Impact Drill Bit Set, 1/16"-1/4"
A 16-piece 4341 HSS titanium hex shank set from 1/16 to 1/4 inch, with 13 sizes, 3 backup pieces and a case with a size index.
Pros
- 16 pieces: 13 sizes from 1/16 to 1/4 inch plus 3 backup pieces
- Press-in pin connection joins bit and hex shank to prevent break-off
- 135-degree split point keeps the bit centered without a pilot hole
- Portable case with a size index for easy selection, storage and carry
Cons
- Sizes stop at 1/4 inch, with nothing larger
- Backup pieces cover only 1/16, 5/64 and 3/32 inch
- 16 pieces in one case need the size index to find the right bit
- No warranty term is stated

19 Pcs HSS Titanium Twist Drill Bit Set
A 19-piece titanium HSS hex shank set in 13 metric sizes from 1.5 mm to 6.5 mm, with a 135-degree split point and size-marked shanks.
Pros
- 19 pieces in 13 metric sizes from 1.5 mm to 6.5 mm, matching 1/16 to 1/4 inch
- Six common sizes include a backup piece each
- 135-degree split point self-centers without a pilot hole
- Size-marked shanks for quick identification
Cons
- Sizes stop at 1/4 inch, with nothing larger
- Backup pieces cover six common sizes only
- Materials are limited to mild steel, carbon steel, sheet metal, solid wood and plastics
- No storage case is stated
Drill bit shank types: what the sets here use
Every set here uses a 1/4-inch hex shank. The hex shape locks into a quick-change chuck and resists spinning in the chuck, and the DEWALT set states its 1/4-inch hex shank resists axial torque with impact drivers. The amoolo set adds a press-in pin connection that joins the bit and the hex shank into one piece to prevent break-off, and the YXYL set states a precision-machined 1/4-inch hex shank that locks into quick-change chucks and any impact driver.
What a shank does
The shank is the end of the bit the tool holds, and it carries the turning force from the tool to the cutting tip. A hex shank grips by its flat sides, so it holds firm where a smooth shank can spin. The GMTOOLS set states its quick-change 1/4-inch hex shank locks into a chuck without slipping and falling out, and the amoolo set states its final straightening step keeps the bit in a straight line during rotation and reduces chatter. The tip still does the cutting: all 4 sets use a 135-degree split point. The amoolo and YXYL sets state it keeps the bit centered without a pilot hole, the GMTOOLS set states it makes drilling easy with less pressure and prevents walking, and the DEWALT set states its split point on 1/8 inch and larger sizes.
Matching the shank to the tool
Check that the tool accepts 1/4-inch hex shanks before buying. The DEWALT set is compatible with most impact drivers and drills, and the amoolo and GMTOOLS sets fit power screwdrivers, impact drivers and other tools that accept 1/4-inch hex shanks. A quick-change chuck takes the hex shank straight in, which is the point of the design: the YXYL set states its shank locks into quick-change chucks, and the amoolo set states quick changing between multiple drill bits and screwdriver bits with just one power tool.
Sizes and sets
Size range is where the sets differ. The GMTOOLS set covers 1/16 to 1/2 inch in 30 pieces, the widest range here. The DEWALT set covers 1/16 to 5/16 inch in 12 pieces. The amoolo set covers 1/16 to 1/4 inch in 16 pieces, with 13 sizes and a backup piece for 1/16, 5/64 and 3/32 inch. The YXYL set covers 13 metric sizes from 1.5 mm to 6.5 mm, matching 1/16 inch to 1/4 inch, in 19 pieces, with a backup piece for each of six common sizes. The amoolo set comes with a portable case with a size index, and the GMTOOLS set stores in a box with a size index.
Hex shank drill bit sets for the job
The gear below covers the drilling itself: each set handles the same 1/4-inch hex shank fitting, and the choice comes down to size range and piece count.
FAQ: lasers and CNC
What size shank do these drill bit sets use?
A 1/4-inch hex shank on all 4 sets, for quick-change chucks on impact drivers and drills.
Do hex shank drill bits work in a regular drill?
Yes, where the tool accepts 1/4-inch hex shanks. The DEWALT set is compatible with most impact drivers and drills, and the amoolo and GMTOOLS sets fit power screwdrivers, impact drivers and other tools that accept 1/4-inch hex shanks.
What is the 135-degree split point for?
Across these sets, the split point is stated to keep the bit centered without a pilot hole and to resist walking. The amoolo and YXYL sets state the centering without a pilot hole, the GMTOOLS and DEWALT sets state it prevents or reduces walking, and the DEWALT set states its split point design on 1/8 inch and larger sizes.
Which set covers the widest size range?
The GMTOOLS set, from 1/16 to 1/2 inch in 30 pieces.
Do these sets include backup bits?
Two of them do. The amoolo set includes a backup piece for 1/16, 5/64 and 3/32 inch, and the YXYL set includes a backup piece for each of six common sizes. The DEWALT and GMTOOLS sets state no backup pieces.
Related: drill bit types for metal, drill bit types chart, best metal drill bit and collet vs drill chuck for CNC. Also see our best countersink drill bit set for wood.




