Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Easiest 3D Printer for Beginners

A plain guide to the easiest 3D printer for beginners, covering auto calibration, build volume, nozzle heat and the slicer steps that make a first print smooth.

Easiest 3D Printer for Beginners
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bambu Lab P1S 3D PrinterBambu Lab P1S 3D PrinterView on Amazon
  2. 2AMOLEN Silk 3D Printer Filament BundleAMOLEN Silk 3D Printer Filament BundleView on Amazon
  3. 3UGUESS Silk PLA+ 3D Printer Filament BundleUGUESS Silk PLA+ 3D Printer Filament BundleView on Amazon
  4. 4Bambu Lab P2S 3D PrinterBambu Lab P2S 3D PrinterView on Amazon
  5. 5DEEPLEE PLA Basic 1.75mm 3D Printer Filament Green 1KGDEEPLEE PLA Basic 1.75mm 3D Printer Filament Green 1KGView on Amazon
  6. 6DEEPLEE PLA Basic 1.75mm 3D Printer Filament White 1KGDEEPLEE PLA Basic 1.75mm 3D Printer Filament White 1KGView on Amazon

The easiest 3D printer for beginners is a machine that handles calibration on its own and turns a model file into a print through a slicer from the same maker. A new maker should look for full auto calibration, a touchscreen that walks through each step in plain language, and a build volume that fits the models planned for the coming weeks. The rest of this guide walks through each check in order, with the figures the maker states for the reference machines.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

This guide gives a figure only where the maker states a figure. Where a listing gives no figure, the guide says so rather than guessing, and every figure here comes from the reference listings named in the text.

Step 1: Choose a printer that calibrates itself

Calibration sets the distance between the nozzle and the bed, and a printer that does it on its own removes the most common beginner frustration. The ELEGOO Centauri 2 Combo lists full auto calibration with smart pre-print checks, and 22 intelligent sensors monitor every print in real time. The ELEGOO Centauri Carbon 2 Combo lists fully automated calibration and monitoring. Treat auto calibration as the first thing to check, and confirm that the listing states it plainly before ordering. The what is a FDM printer guide explains the printing method behind these machines.

Step 2: Check the build volume and nozzle temperature

Build volume decides how large a model can print without splitting it into parts, and nozzle temperature limits which filaments the machine can melt. The ELEGOO Centauri Carbon 2 Combo lists a 256 x 256 x 256 mm build volume with a 350°C nozzle. The ELEGOO Centauri 2 Combo lists the same 350°C nozzle, and its stated size runs 19.69 inches x 18.9 inches x 23.23 inches, so measure the desk or shelf space before ordering. Match the volume to the models planned, and treat the nozzle figure as a ceiling set by the maker, not a setting to use on every print. The nozzle temperature guide shows which filament types suit which heat ranges.

Step 3: Look for a clear screen and simple controls

A beginner spends a lot of time at the printer screen, so the controls should read plainly. The ELEGOO Centauri 2 Combo lists a user-friendly 5-inch touchscreen, a magnetic printhead cover, a semi-automatic belt tensioner and a nozzle wiper, all aimed at quicker maintenance. The same machine lists remote control through the ELEGOO Matrix app, so the printer can be controlled without standing beside it. When comparing machines, look for a screen that shows progress, filament status and errors in words, and skip any machine whose controls need a manual open beside it. The 3D printer parts diagram names each part a beginner meets during setup.

Step 4: Decide whether multicolor printing matters

Multicolor printing adds color without painting, but it also adds filament to load and setup steps to learn. The ELEGOO Centauri 2 Combo lists 4-color printing with CANVAS, instant color switching, RFID filament recognition and auto refill. The ELEGOO Centauri Carbon 2 Combo lists 4-color printing with instant color switching and smart filament detection. A beginner who prints models in plain filament can leave multicolor for later, while a maker who sells colorful models may want it from the start. The multi color 3D printer for beginners guide covers what multicolor adds to a first setup.

Step 5: Learn the slicer before the first print

The slicer turns a model file into the instructions the printer follows, and a beginner should open it before the machine arrives. The ELEGOO Centauri 2 Combo lists ELEGOOSlicer for project preparation and Nexprint for ready-to-print models, with the ELEGOO Matrix app for remote control. Pick a slicer from the same maker when possible, since its profiles match the machine, and run through a small model in the slicer first to see how supports, infill and layer height look on screen. A slicer that feels clear on screen usually feels clear at the printer too. The 3D printer nozzle types guide explains which nozzle suits which material.

Step 6: Plan for speed, noise and upkeep

Rated speed tells how fast the maker says the machine can move, not how fast every print should run. The ELEGOO Centauri 2 Combo lists a high-speed CoreXY system rated up to 500 mm/s with 20,000 mm/s² acceleration, plus vibration compensation and precise extrusion control for clean surfaces. The ELEGOO Centauri Carbon 2 Combo lists the same rated speed and acceleration. A beginner should start slow, watch the first layers, and raise speed only after simple prints come out clean. Keep the nozzle wiper and belt tensioner in mind as well: the Centauri 2 Combo lists a nozzle wiper and a semi-automatic belt tensioner, which make routine upkeep quicker. The are 3D printers loud guide covers noise, and the how to clean build plate guide covers bed care.

Common mistakes to avoid

  • Buying a printer without auto calibration, then fighting bed leveling on every print.
  • Printing a large model as the first job instead of a small model that finishes quickly.
  • Skipping the slicer preview, then finding supports or orientation problems mid-print.
  • Storing filament in a damp room, then blaming the printer for rough surfaces. See the how to store 3D filament guide.
  • Ignoring upkeep until a clogged nozzle or loose belt ruins a print. See the 3D printer repair guide.

Easiest 3D printer for beginners: the short version

  1. Pick a printer with full auto calibration and smart pre-print checks.
  2. Match the build volume to planned models, and check the nozzle temperature the maker states.
  3. Use the touchscreen and the app to run the first print.
  4. Start with a small model and a plain filament, then try harder shapes.
  5. Keep the bed clean and the filament dry.
  6. Add multicolor printing later, once simple prints run well.

FAQ: lasers and CNC

What makes a 3D printer easy for a beginner?

Full auto calibration, smart pre-print checks and a clear touchscreen do the most work for a beginner. The ELEGOO Centauri 2 Combo pairs those with 22 intelligent sensors that monitor every print in real time, so the machine catches problems the owner might miss. A simple slicer from the same maker rounds out the setup.

How fast can a beginner 3D printer print?

The ELEGOO Centauri 2 Combo lists a rated speed of up to 500 mm/s with 20,000 mm/s² acceleration, and the ELEGOO Centauri Carbon 2 Combo lists the same rated speed and acceleration. That figure is a maker rating for the CoreXY system, not a speed every print should use, so a beginner should start slow and raise speed only after simple prints come out clean.

What build volume do beginner printers offer?

The ELEGOO Centauri Carbon 2 Combo lists a 256 x 256 x 256 mm build volume. Measure planned models against that figure, and check the machine size as well: the ELEGOO Centauri 2 Combo lists stated dimensions of 19.69 inches x 18.9 inches x 23.23 inches.

Do beginner 3D printers print in multiple colors?

Some do. The ELEGOO Centauri 2 Combo lists 4-color printing with CANVAS and instant color switching, and the ELEGOO Centauri Carbon 2 Combo lists the same 4-color printing with instant color switching. The Centauri 2 Combo adds RFID filament recognition and auto refill, which keep color changes smooth.

What nozzle temperature can a beginner printer reach?

The ELEGOO Centauri 2 Combo lists a 350°C nozzle, and the ELEGOO Centauri Carbon 2 Combo lists the same 350°C nozzle. The nozzle temperature guide shows which filament types suit which heat ranges, so match the filament to the temperature the maker states.

Do 3D printers come with filament?

Not always. The listings named in this guide do not state filament in the box, so check the box contents before ordering. The do 3D printers come with filament guide explains what ships with a new machine and what to buy alongside it.

Related: the 3D printer hub, best 3D printer for Warhammer and best 3D printer for DND miniatures. Also see the how to change 3D printer filament guide and the what 3D printer should I get guide.

More buying guides