How Thick Is 3D Printer Filament and Which Size to Buy
A guide to 3D printer filament thickness, with four 1.75mm PLA packs compared on diameter accuracy, spool size and color range.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
UJOY3D Elite PLA+ Multicolor 3D Printer Filament9.6/10View on Amazon - 2
SUNLU PLA+2.0 3D Printer Filament, Black, 1KG9.6/10View on Amazon - 3
SUNLU PLA 3D Printer Filament, White, 1KG9.6/10View on Amazon - 4
15 Bright Colors 1.75mm 3D Pen PLA Filament9.5/10View on Amazon
A spool that will not feed and a pen that jams on the first line both come back to the same question, and how thick is 3d printer filament is the number to settle before buying. Every filament in this guide lists 1.75mm in diameter, the size stated on all four packs below. A 3.0mm size also exists, and the DO3D sample (on Amazon) pack states it does not fit a 3.0mm 3Doodler pen, so matching the diameter to the printer or pen matters more than the brand on the spool.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

UJOY3D Elite PLA+ Multicolor 3D Printer Filament
A 16-spool bundle of PLA+ in 16 colors, 1.75mm diameter with ±0.03mm accuracy, 0.25kg per spool and 4kg in total.
Pros
- 16 colors across 16 spools, 0.25kg each
- 1.75mm diameter with ±0.03mm accuracy stated
- Print settings stated: nozzle 205-220°C, bed 55-65°C, speed 200-400 mm/s
- Vacuum sealed with desiccant in each pack
Cons
- No warranty term is stated
- Small 0.25kg spools need swapping often
- 16 small spools to store instead of one large spool
- Color set is fixed to the 16 listed colors

SUNLU PLA+2.0 3D Printer Filament, Black, 1KG
A single 1KG spool of SUNLU PLA+ 2.0 with a stated settings table, accuracy figure and vacuum packaging.
Pros
- Accuracy of +/- 0.02mm stated, with neatly wound filament stated
- Speeds of up to 300mm/s stated, with a settings table stated
- Nozzle 205-220°C and bed 50-60°C stated, with speed 100-300mm/s stated
- Vacuum packaging stated, with a reusable spool stated
Cons
- Warranty term is only 30-Day stated
- No safety certification stated
- Single colour stated, no bundle stated
- Spool dimensions must be checked, at 195mm diameter stated

SUNLU PLA 3D Printer Filament, White, 1KG
A white PLA spool with a stated diameter accuracy of plus or minus 0.02mm, neatly wound, with recommended settings for most FDM printers.
Pros
- Diameter accuracy of plus or minus 0.02mm stated
- Neatly wound spool for smoother printing as stated
- No clogs, bubbles, or tangles as stated
- Recommended settings stated for nozzle, bed, and speed
Cons
- No warranty term is stated
- No tensile strength figure stated
- Spool diameter of 8.00 inches may not suit every printer holder
- White colour only in this listing

15 Bright Colors 1.75mm 3D Pen PLA Filament
A sample pack of 15 bright PLA colors at 1.75mm, 10 feet per color and 150 feet in total, for 3D pens and 3D printers.
Pros
- 15 colors, 10 feet each, 150 feet in total
- 1.75mm PLA with precise diameter control stated
- Fits MYNT3D and SCRIB3D printing pens
- Non-toxic material stated, with no bubbles
Cons
- 10 feet per color is short for larger prints
- Does not fit a 3.0mm 3Doodler pen
- No warranty term is stated
- Sample pack only, not a full spool
How thick is 3d printer filament
All four packs in this guide list 1.75mm, the diameter to match to the printer or pen. The UJOY3D bundle (on Amazon) states ±0.03mm accuracy, and both SUNLU spools state ±0.02mm accuracy. The DO3D pack names another size directly: it fits MYNT3D and SCRIB3D pens and does not fit a 3.0mm 3Doodler pen, so see our can you use 3D pen filament in 3D printer guide before mixing pen and printer filament. Check the diameter on the spool or pen before ordering, because a filament of the wrong diameter may jam or feed poorly.
What diameter accuracy means
The accuracy figure is the stated tolerance around 1.75mm. The UJOY3D bundle states ±0.03mm accuracy and links its formula to smoother extrusion, while the SUNLU spools state ±0.02mm accuracy with neat winding. A tighter stated tolerance is worth noting when comparing two spools, but spool size, color range and stated print settings matter as much. The UJOY3D bundle is the only pack here that states nozzle and bed temperatures and a printing speed range, so it gives the most to compare on settings. For the first prints, see our how to 3D print for beginners guide.
Four 1.75mm PLA packs for printers and pens
Once the diameter is settled at 1.75mm, the choice is the pack: color range, spool size and stated accuracy are what differ, and the four packs below cover a sample pack, a bundle and two single-color spools.
FAQ: lasers and CNC
Is 1.75mm the only filament size?
No. All four packs here list 1.75mm, and the DO3D pack states it does not fit a 3.0mm 3Doodler pen, so a 3.0mm size exists.
What does ±0.03mm accuracy mean?
It is the tolerance the UJOY3D bundle states around its 1.75mm diameter. Both SUNLU spools state ±0.02mm accuracy, so compare the stated figures when choosing between spools.
How much filament is in the DO3D sample pack?
15 colors at 10 feet each, 150 feet in total, packed in one vacuum bag. Each color is short, so the pack suits sampling rather than long prints.
What temperatures does the UJOY3D PLA+ list?
A nozzle temperature of 205-220°C, 210°C for the first layer, and a bed temperature of 55-65°C, with a printing speed range of 200-400 mm/s. No other pack here states print settings.
Can I use 1.75mm filament in a 3D pen?
The DO3D pack fits MYNT3D and SCRIB3D pens and does not fit a 3.0mm 3Doodler pen. Check the pen for its diameter before ordering.
Related: the 3D printers hub, best PETG filament for Bambu P1S and best 3D printer for beginners with multiple colors. Also see our how to 3D print for beginners. Also see our why does my PLA filament keep breaking.




