Do 3D Printers Come With Filament?
Some 3D printers ship with a starter amount of filament and some ship with none, so check the box contents and keep a reusable spool ready for refill filament.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
for Bambu Lab AMS Reusable Filament9.7/10View on Amazon - 2
MarsWork 2-Pack Quick-Swap Reusable Spools9.6/10View on Amazon - 3
ANYCUBIC Reusable Filament Spool9.6/10View on Amazon - 4
MarsWork Quick-Swap Reusable Spool for Refill9.6/10View on Amazon
Do 3D printers come with filament? The short answer is that it depends on the printer: some ship with a small starter amount for a first print, and some ship with none at all. Check the box contents first, because they change by model and by bundle. If your printer arrives without filament, a spooled roll is the next buy, and refill filament only works if you already own a reusable spool.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

for Bambu Lab AMS Reusable Filament
A perforated reusable spool for Bambu Lab AMS, heat resistant up to 80°C, with a 54.5 mm center hole.
Pros
- Perforated design with 360° airflow for faster, more even drying
- Heat resistant up to 80°C, safe for filament dryers and drying boxes
- 54.5 mm center hole and 200 mm outer diameter fit Bambu Lab AMS and AMS lite
- Works with PLA, PETG, ABS, and TPU in 0.5KG, 0.75KG, and 1KG sizes
Cons
- No warranty term is stated
- One spool only; a second refill needs another spool
- Works with 0.5KG, 0.75KG, and 1KG sizes only, per the listing
- The fit list centers on Bambu Lab AMS models

MarsWork 2-Pack Quick-Swap Reusable Spools
Two quick-swap reusable spools for refill filament, with a two-finger press, strap, clip, and color cards.
Pros
- Two spools in one pack for two refills or two colors
- Two-finger press opens the spool for swaps in seconds
- Included strap holds half-used filament for storage
- Built-in filament clip and color card system keep ends and colors sorted
Cons
- Two spools take more storage space than one
- Fits refill filament with an approximately 82 mm cardboard core only
- Ships empty; filament is separate
- Color cards and straps are small parts to keep with each spool

ANYCUBIC Reusable Filament Spool
A reusable ABS filament spool, 196 x 67 mm, with locking threads and drying up to 80℃.
Pros
- ABS build for durability
- Supports high-temperature filament drying up to 80℃
- Redesigned threads lock the flanges to prevent filament entanglement
- 196 x 67 mm size fits most spooless filaments
Cons
- No warranty term is stated
- One spool only
- Setup needs chip stickers seated in the grooves on both flanges
- Locking needs a press and rotate until it clicks

MarsWork Quick-Swap Reusable Spool for Refill
A quick-swap reusable spool for refill filament, with a two-finger press, strap, clip, and color cards.
Pros
- Two-finger press opens the spool for swaps in seconds
- Included strap holds half-used filament for storage
- Built-in filament clip holds ends to reduce tangles
- Color card system identifies material and color at a glance
Cons
- One spool only; a second refill needs another spool
- Fits refill filament with an approximately 82 mm cardboard core only
- Ships empty; filament is separate
- Color cards and strap are small parts to keep with the spool
Do 3D printers come with filament?
A printer sold to a first-time buyer often includes a small amount for a first print, while a bare machine may include none. A small starter amount is for trying the printer, not for a run of projects. Filament comes wound on a spool, or as refill filament that arrives without a spool and needs a reusable spool to run.
What to check before you buy filament
Check the box contents, the material your printer runs, and whether the filament comes on a spool or as a refill. Refill filament needs a reusable spool with the right core size, so match the spool to the refill first.
Reusable spools for refill filament
Refill filament arrives without a spool, so a reusable spool is the part that lets you load it.
How to load refill filament on a reusable spool
Open the spool, load the refill, and lock it before threading the filament into the printer. On the MarsWork spools, press with two fingers to open the spool, then use the strap for half-used filament and the clip to hold the end. On the ANYCUBIC spool (on Amazon), seat the chip stickers in the grooves on both flanges, load the filament, close the spool, press firmly, and rotate until it clicks. On the UniTak3D spool (on Amazon), twist it open, load the filament, and lock the end in its slot. On the MarsWork and UniTak3D spools, keep the filament end clipped or slotted when a spool is stored between prints.
FAQ: lasers and CNC
Do all 3D printers come with filament?
No. Some include a small starter amount and some include none, so check the box contents first.
What is refill filament?
Refill filament is filament sold without a spool. You load it onto a reusable spool from the gear section and print as normal.
Can I use a reusable spool with any printer?
It depends on the spool. The MarsWork spools fit Bambu Lab 3D printers, the UniTak3D spool fits Bambu Lab AMS and AMS lite and most FDM printers, and the ANYCUBIC spool is sized for spooless filament.
Why buy refill filament instead of a spooled roll?
Refill filament arrives without a spool, so you reuse a spool you already own instead of adding another spool to the shelf. The MarsWork and UniTak3D spools are built for that workflow, with quick-swap openings and a clip or slot that holds the filament end.
Can I dry filament on a reusable spool?
The ANYCUBIC spool supports drying up to 80℃ and the UniTak3D spool is heat resistant up to 80°C with a perforated design for airflow. Check the drying limit of the spool you own before putting it in a dryer.
Related: the 3D printer hub, how to remove filament from a 3D printer, and 3D printer first layer problems and fixes.




