Best 3D Printer for Warhammer (2026): 4 Picks for Miniatures
Resin printers for fine miniatures and fast FDM machines for terrain, compared on resolution, build volume, speed and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best for DetailHALOT-MAGE S 14K9.6/10View on Amazon - 2
Best Small MiniaturesHALOT-X1 Neo9.6/10View on Amazon - 3
Best for TerrainAdventurer 5M9.5/10View on Amazon - 4
Also ConsideredAdventurer 5M Pro9.6/10View on Amazon
Printing an army of small, detailed miniatures is a different job from printing a helmet or a sign. The figures are small, the faces and weapons carry fine detail, and a batch of them has to come out clean again and again. This guide compares resin and FDM machines for that job, and it names the best 3d printer for warhammer from what each listing states: resin printers built for miniatures and fast FDM printers for larger pieces.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best for Detail HALOT-MAGE S 14K: 14K display at 13320 x 5120 px with 16.8 x 24.8 um pixels, 150 mm/h rated speed and a 10.1 in LCD. Check price on Amazon
- Best Small Miniatures HALOT-X1 Neo: 9K LCD with 18 um XY pixels, a pre-leveled build platform and WiFi and USB file transfer. Check price on Amazon
- Best for Terrain Adventurer 5M: 600 mm/s travel speed, a 220 x 220 x 220 mm build volume and one-click automatic leveling. Check price on Amazon
- Also Considered Adventurer 5M Pro: 600 mm/s speed and a 220 x 220 x 220 mm build volume, with other details not stated. Check price on Amazon
Machines on the list

Creality Resin 3D Printer Halot Mage S 14K
A 14K resin printer with a 10.1 in HD LCD, a print size of 8.78 x 4.96 x 9.06 in and printing speed up to 150 mm/h.
Pros
- 14K display at 13320 x 5120 px with 16.8 x 24.8 um pixels
- Prints a 15 cm tall model in one hour at up to 150 mm/h
- Air purifier with an activated carbon filter for odor-free printing
- Laser-carved build plate and 3-layered Pictor speed-release film
Cons
- 27.56 lb, the heaviest pick here
- No stated layer thickness range
- Smart Resin Pump is an optional upgrade, not included
- 3-month Chitubox PRO membership is a limited offer, not a permanent license

Creality HALOT-X1 Neo Resin 3D Printer, 9K LCD
A 9K resin printer with a 6.8 in LCD, 18 um XY pixels and a 153.36 x 77.76 x 160 mm build volume, with a pre-leveled build platform.
Pros
- 9K LCD at 8520 x 4320 with 18 um XY pixels for fine miniatures
- 0.01 to 0.2 mm layer thickness
- Factory pre-leveled build platform, ready out of the box
- WiFi and USB file transfer, plus Creality Cloud
Cons
- 153.36 x 77.76 x 160 mm build volume is the smallest here
- No stated print speed
- No stated air purifier or filter
- 6.8 in LCD is smaller than the 10.1 in display on the HALOT-MAGE S 14K

FLASHFORGE Adventurer 5M Pro 3D Printer with 1
An enclosed 3D printer with a built-in camera, a 3-second quick-swap nozzle, a 280°C nozzle and a 600mm/s travel speed.
Pros
- 3-second quick-swap nozzle across 0.25/0.4/0.6/0.8mm sizes
- Fully enclosed chamber with dual filtration, quiet under 50dB
- Built-in camera for real-time monitoring and time-lapse video creation
- 280°C nozzle and 110°C heated bed for ABS, ASA, PETG-CF, PLA and PETG
Cons
- No multi-color printing is stated
- No concrete warranty term is stated
- Nozzle temperature tops at 280°C
- No filament auto refill figure is stated

FLASHFORGE Adventurer 5M 3D Printer,Support Multi
A CoreXY FDM printer with a 600 mm/s travel speed, a 220 x 220 x 220 mm build volume and one-click automatic leveling.
Pros
- 600 mm/s travel speed with 20000mm/s² acceleration
- 220 x 220 x 220 mm build volume for large pieces
- 280°C direct extruder with 0.25/0.4/0.6/0.8mm nozzle options
- Prints PLA, PETG, ABS, ASA, PLA-CF, ASA-CF and PETG-CF
Cons
- No stated fine-detail figures like the resin picks list
- 22.05 lb, heavier than the HALOT-X1 Neo at 9.66 lb
- Remote monitoring needs the 5M Camera Kit, sold separately
- 14.2 x 14.8 x 16.2 in footprint needs more desk space than the HALOT-X1 Neo
Specs compared
| Model | HQ Score | Type | Resolution | Build volume | Rated speed | Warranty |
|---|---|---|---|---|---|---|
| HALOT-MAGE S 14K | 9.6/10 | Resin | 14K, 13320 x 5120 px | 8.78 x 4.96 x 9.06 in | 150 mm/h | 1 years |
| HALOT-X1 Neo | 9.6/10 | Resin | 9K, 8520 x 4320, 18 um | 153.36 x 77.76 x 160 mm | Not stated | 1 Year Manufacturer |
| Adventurer 5M | 9.5/10 | FDM | Not stated | 220 x 220 x 220 mm | 600 mm/s | 12 months |
| Adventurer 5M Pro | 9.6/10 | FDM | Not stated | 220 x 220 x 220 mm | 600 mm/s | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 19 November 2026.
Resin for miniatures, FDM for terrain
The split in this guide is the split in the listings. The resin picks state the fine detail a miniature needs: the HALOT-MAGE S 14K lists a 13320 x 5120 px display with 16.8 x 24.8 um pixels, and the HALOT-X1 Neo lists an 18 um XY pixel size with a 6.8 in 9K LCD. The FDM picks state speed and size instead: the Adventurer 5M lists a 600 mm/s travel speed with a 220 x 220 x 220 mm build volume, and the Adventurer 5M Pro lists the same speed and build volume. Match the machine to the print: resin where faces and weapons need sharp edges, FDM where the print is big and the detail can stay coarse.
Buying guide: best 3d printer for warhammer
Detail starts with the display
For small figures, the display decides how sharp the print looks. The HALOT-MAGE S 14K lists a 10.1 in HD LCD at 13320 x 5120 px, and the HALOT-X1 Neo lists a 6.8 in 9K LCD at 8520 x 4320 with an 18 um XY pixel size. Layer thickness matters too: the HALOT-X1 Neo lists a 0.01 to 0.2 mm layer thickness. The FDM picks do not state a layer height for miniatures, so compare them on build volume and speed instead of fine detail.
Build volume sets the batch
A bigger build volume prints more figures in one run, or one bigger piece. The Adventurer 5M lists a 220 x 220 x 220 mm build volume, the HALOT-MAGE S 14K lists a print size of 8.78 x 4.96 x 9.06 in, and the HALOT-X1 Neo lists a 153.36 x 77.76 x 160 mm build volume. The Adventurer 5M Pro lists a 220 x 220 x 220 mm build volume. Measure the largest piece you plan to print before you choose, and leave room on the plate for supports.
Speed and workflow
Speed is rated, and the listings rate it in different units. The Adventurer 5M lists a 600 mm/s travel speed and a 20000mm/s² acceleration, with rapid heating to 200°C in 35s. The HALOT-MAGE S 14K lists printing speed up to 150 mm/h and prints a 15 cm tall model in one hour. The HALOT-X1 Neo lists AI model generation that turns 2D images into 3D models in as fast as 3.5 hours, with files moving by USB, 2.4 GHz WiFi or Creality Cloud. Check the whole workflow, from slicing to finishing, not just the headline speed.
Materials and resin handling
The FDM pick lists a wide material range: PLA, PETG, ABS, ASA, PLA+, ABS Pro, PETG Pro, HS PLA, PLA-CF, ASA-CF and PETG-CF. Resin printing is a different workflow: the HALOT-MAGE S 14K lists an air purifier with an activated carbon filter and offers a Smart Resin Pump as an optional upgrade. Plan a ventilated space for resin work, keep resin off skin, and budget for resin, gloves and wash and finish gear alongside the machine.
Resin printers need a ventilated space and care with wet resin: wear gloves when handling resin and fresh prints, and keep the printer where fumes can clear. FDM printers run hot at the nozzle, so keep hands clear while printing and let the bed cool before removing a print. Never leave a running machine unattended for long stretches.
Project Match
Pair the project with the pick:
- Fine miniatures and characters with sharp faces and weapons: HALOT-MAGE S 14K, with a 14K display and 16.8 x 24.8 um pixels.
- Small miniatures and figurines on a desktop: HALOT-X1 Neo, with a 9K display, 18 um XY pixels and a 153.36 x 77.76 x 160 mm build volume.
- Terrain, large pieces and multi-material prints: Adventurer 5M, with a 220 x 220 x 220 mm build volume and PLA, PETG, ABS and ASA in its material list.
- Fast FDM prints at 600 mm/s in a 220 x 220 x 220 mm volume: Adventurer 5M Pro; other details are not stated.
How the scores add up
Each machine is scored on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HALOT-MAGE S 14K | 9.6 | 32 | 21 | 21 | 0 | 3 |
| HALOT-X1 Neo | 9.6 | 30 | 21 | 21 | 0 | 3 |
| Adventurer 5M | 9.5 | 28 | 21 | 20 | 0 | 3 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
FAQ: lasers and CNC
Resin or FDM for Warhammer miniatures?
Resin, for the detail: the HALOT-MAGE S 14K lists a 14K display and the HALOT-X1 Neo lists 18 um XY pixels, both aimed at miniatures and figurines. FDM suits terrain and large pieces, where the Adventurer 5M lists a 220 x 220 x 220 mm build volume and a 600 mm/s travel speed.
What resolution do I need for small miniatures?
The picks here state 14K on the HALOT-MAGE S 14K and 9K on the HALOT-X1 Neo, with pixel sizes of 16.8 x 24.8 um and 18 um. Finer pixels and a higher-resolution display give sharper small features, so compare those figures before build volume.
How big a build volume do I need?
It depends on the largest piece you print. The Adventurer 5M lists 220 x 220 x 220 mm, the HALOT-MAGE S 14K lists 8.78 x 4.96 x 9.06 in, and the HALOT-X1 Neo lists 153.36 x 77.76 x 160 mm. Small figures fit the resin volumes; terrain and large pieces need the FDM volume.
What materials can the FDM printer use?
The Adventurer 5M lists PLA, PETG, ABS, ASA, PLA+, ABS Pro, PETG Pro, HS PLA, PLA-CF, ASA-CF and PETG-CF. The resin picks use UV resin, and the HALOT-MAGE S 14K comes with a 3-month Chitubox PRO slicing software membership.
Do these printers state a warranty?
The Adventurer 5M states 12 months, the HALOT-X1 Neo states 1 Year Manufacturer, and the HALOT-MAGE S 14K states 1 years. The Adventurer 5M Pro states no warranty term.
Do I need ventilation for resin printing?
Yes, plan a ventilated space. The HALOT-MAGE S 14K lists an air purifier with an activated carbon filter for odor-free printing, and the HALOT-X1 Neo lists WiFi and USB file transfer so the printer can sit away from your desk. Keep resin off skin and let prints finish under UV light before handling them for long.
Related: 3D printers, best 3d printer for dnd miniatures, resin 3d printer for beginners, best FDM 3d printing filament and best 3d printer for helmets.




