Best 3d Printer for Dnd Miniatures (2026): 4 Compared
Four FDM and resin printers for tabletop miniatures, compared by build size, rated speed, auto leveling and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCreality Ender-3 V3 Neo9.6/10View on Amazon - 2
Best for DetailMALYAN S100 Mini Resin9.4/10View on Amazon - 3
High-Speed CoreXYFLASHFORGE Adventurer 5M9.6/10View on Amazon - 4
Compact Beginner PickHephi3d TINA2C9.6/10View on Amazon
A tabletop miniature starts as a small figure on a screen, and the printer turns it into a piece you can paint, base and place on the map. The best 3d printer for dnd miniatures is the one that holds fine detail on cloaks, weapons and faces while fitting the size of figure you print most, so this guide compares an FDM workhorse and a resin detail machine with more printers that round out the choice.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you.
Quick picks
- Best Overall Creality Ender-3 V3 Neo: 220 x 220 x 220 mm build, rated 500 mm/s, auto leveling, direct drive extruder and a 1 year warranty. Check price on Amazon
- Best for Detail MALYAN S100 Mini Resin: Resin detail from a 5.5 in 2K screen, 115 x 65 x 110 mm build, auto leveling and a magnetic build plate. Check price on Amazon
- High-Speed CoreXY FLASHFORGE Adventurer 5M: CoreXY machine rated 600 mm/s with a 280°C direct extruder and a 220 x 220 x 220 mm build. Check price on Amazon
- Compact Beginner Pick Hephi3d TINA2C: Fully assembled mini printer with auto leveling, app and WiFi control, ready in 5 mins. Check price on Amazon
Machines on the list

Creality Ender-3 V3 Neo 3D Printer for Beginners
An FDM printer for beginners with a 220 x 220 x 220 mm build, rated 500 mm/s, auto leveling and a direct drive extruder.
Pros
- 220 x 220 x 220 mm build fits larger figures and terrain pieces
- Rated 500 mm/s with 8000 mm/s² acceleration for faster prints
- Direct drive extruder supports TPU 90A and above for flexible parts
- Auto leveling, flow calibration and AI camera monitoring are included
Cons
- FDM layer lines show more on small figures than the resin pick
- No enclosure is stated
- No resin option in this FDM machine
- 500 mm/s is a rated maximum, so small detailed figures print slower

FLASHFORGE Adventurer 5M 3D Printer with Fully
CoreXY FDM printer with 600mm/s travel speed, a 220x220x220mm print size, and a 280°C direct drive extruder.
Pros
- 600mm/s travel speed with 20000mm/s² acceleration
- 220x220x220mm print size for larger parts
- 280°C direct drive extruder with a 3-second nozzle change
- Dual-sided PEI platform and app monitoring through Flash Studio
Cons
- 600mm/s is stated as travel speed, not print speed
- Filament types are not stated in the listing
- Setup time is not stated in the listing
- Nozzle sizes beyond 0.4mm are optional, not included as standard

Hephi3d TINA2C 3D Printer Beginner Friendly
Fully assembled mini FDM printer with auto leveling, app and WiFi control, and a starter kit for beginners.
Pros
- Fully assembled with a start time of 5 minutes
- Starter kit with a PLA spool, tools, and a TF card
- 3500+ model library with 25+ design modules
- Open source design with Wiibuilder and Cura support
Cons
- Build volume is not stated in the listing
- Print speed is not stated in the listing
- The Entina listing of the same Tina2C model states a different start time of 8 minutes
- Filament types beyond the starter PLA spool are not stated

MALYAN S100 Mini Resin 3D Printer with 5.5" 2K LCD
A mini resin printer with a 5.5 in 2K screen, a 115 x 65 x 110 mm build, auto leveling and a magnetic build plate.
Pros
- 2560 x 1440 resolution on a 5.5 in screen for fine miniature detail
- Auto calibration and leveling at the start of each print
- Magnetic build plate removes easily for cleaning between prints
- 57W parallel LED array gives a stable, uniform light source
Cons
- 115 x 65 x 110 mm build fits small figures only
- No warranty term is stated
- No print speed is stated
- No camera monitoring is stated
Other machines to compare
SUNLU 14K ABS-Like 3D Printer Resin 3000GCheck price on Amazon
phrozen Sonic Mighty 8K LCD Resin 3D PrinterCheck price on Amazon
phrozen Sonic Mighty 12K LCD Resin 3D PrinterCheck price on Amazon
Chitu Systems Conjure Sculpt ResinCheck price on Amazon
RESIONE CL-TH 3D Printer ResinCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Build size | Rated speed | Auto leveling | Warranty |
|---|---|---|---|---|---|---|
| Creality Ender-3 V3 Neo | 9.6/10 | FDM | 220 x 220 x 220 mm | 500 mm/s | Yes | 1 year |
| MALYAN S100 Mini Resin | 9.4/10 | Resin | 115 x 65 x 110 mm | Not stated | Yes | Not stated |
| FLASHFORGE Adventurer 5M | 9.6/10 | FDM | 220 x 220 x 220 mm | 600 mm/s | Yes | Not stated |
| Hephi3d TINA2C | 9.6/10 | Not stated | Not stated | Not stated | Yes | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 18 November 2026.
Resin detail or FDM speed
Miniatures reward detail, and the print method decides how much detail you get. The MALYAN S100 is the resin pick here, with a 5.5 in LCD screen at 2560 x 1440 resolution and a 57W parallel LED array, which the maker says reduces layer lines and keeps model surfaces smooth. Its build is 115 x 65 x 110 mm, so it suits small figures rather than terrain. The FDM picks trade some of that fine detail for size and speed: the Creality Ender-3 V3 Neo builds at 220 x 220 x 220 mm and is rated at 500 mm/s, while the FLASHFORGE Adventurer 5M is rated at 600 mm/s with a 220 x 220 x 220 mm build. For a painter, resin wins on small hero figures. For terrain, props and larger pieces, the FDM builds win on size.
How to choose the best 3d printer for dnd miniatures
Match the build size to your figures
Start from the largest piece you print. The MALYAN S100 builds at 115 x 65 x 110 mm, which suits small figures. The Creality Ender-3 V3 Neo and the FLASHFORGE Adventurer 5M build at 220 x 220 x 220 mm, which takes terrain, props and larger figures. The Hephi3d TINA2C states no build size, so check the size before ordering. The 3d printers hub lists more machines by type.
Detail comes from the print method
Resin printing lays down fine layers, and the S100 pairs a 2K screen with a 57W parallel LED array for smooth surfaces. FDM printing lays down melted filament, so layer lines show more on small figures, even on a fast machine. If your shelf is mostly hero figures, pick resin. If it is mostly terrain, pick FDM and spend the saved time painting. For painting, see the airbrush vs paint brush for miniatures guide.
Speed matters after the first print
Rated speed is a maximum, not a typical print speed, so read it as capacity rather than a promise. The Creality is rated at 500 mm/s with 8000 mm/s² acceleration, and the FLASHFORGE is rated at 600 mm/s. Speed helps most on batches of terrain and props, where each piece is large. On small hero figures, detail matters more than speed. Filament choice matters too: see the what is the best 3d printing filament guide and the best fdm 3d printing filament picks.
Mind the resin workflow
Resin printing adds steps that FDM printing does not have. Work in a ventilated space, follow the maker guidance for handling resin and cleaning prints, and keep uncured resin off skin and work surfaces. The S100 helps here with a magnetic build plate that lifts off for cleaning and a laser-engraved plate that holds prints in place. If that workflow sounds like more than you want, an FDM pick keeps the process simpler. For a gentler start, see the resin 3d printer for beginners guide.
Resin printing needs ventilation and care with uncured resin. Work in a ventilated space, follow the maker guidance for handling resin and cleaning prints, and keep resin away from food surfaces.
Project Match
- Small detailed hero figures: MALYAN S100, with a 5.5 in 2K screen and a 115 x 65 x 110 mm build.
- Large terrain pieces and props: Creality Ender-3 V3 Neo, with a 220 x 220 x 220 mm build rated at 500 mm/s.
- Fast batches of figures: FLASHFORGE Adventurer 5M, rated at 600 mm/s with a 220 x 220 x 220 mm build.
- A first printer for a beginner: Hephi3d TINA2C, fully assembled with auto leveling, ready in 5 mins.
How the scores add up
Each printer is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Creality Ender-3 V3 Neo | 9.6 | 30 | 21 | 21 | 0 | 3 |
| MALYAN S100 Mini Resin | 9.4 | 28 | 20 | 20 | 0 | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly.
FAQ: lasers and CNC
Is resin or FDM better for Dnd miniatures?
Resin holds finer detail on small figures: the MALYAN S100 lists a 5.5 in 2K screen at 2560 x 1440. FDM suits larger terrain and props: the Creality lists a 220 x 220 x 220 mm build. Choose resin for hero figures and FDM for terrain.
What build size do I need for miniatures?
Small figures fit the MALYAN S100 at 115 x 65 x 110 mm. Larger terrain and props need a bigger build, such as the 220 x 220 x 220 mm build on the Creality and the FLASHFORGE.
Do these printers level themselves?
Each of the picks lists auto leveling: the Creality, the MALYAN, the FLASHFORGE with fully auto leveling, and the Hephi3d TINA2C.
Which of these printers state a warranty term?
Only the Creality Ender-3 V3 Neo states a warranty term, 1 year. The others state no warranty term.
Related: resin 3d printer for beginners, best fdm 3d printing filament, airbrush vs paint brush for miniatures and the 3d printers hub.




