Are 3D Printers Loud? Noise Levels and Quieting Tips
3D printers make noise while they print, and a TOPCUBE enclosure can cut the sound from 60 decibels to 40 decibels, according to the maker.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
TOPCUBE 3D Printer Enclosure for Bambu Lab A19.7/10View on Amazon - 2
TOPCUBE 3D Printer Enclosure for Bambu Lab A19.6/10View on Amazon - 3
VEVOR 3D Printer Enclosure9.5/10View on Amazon - 4
Creality 3D Printer Enclosure Fireproof9.5/10View on Amazon
A 3D printer runs for hours while it builds a part layer by layer, and the sound of the machine fills the room the whole time. For a maker who prints in a shared room, that sound is the problem to solve. So are 3D printers loud? Yes, and a full enclosure is one way to cut the sound. This guide explains what makes a printer loud and which enclosure fits it.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

TOPCUBE 3D Printer Enclosure for Bambu Lab A1
A stainless steel frame enclosure for the Bambu Lab A1 Combo, with an LED light and a stated cut from 60 decibels to 40 decibels.
Pros
- Noise cut from 60 decibels to 40 decibels, per the maker
- Stainless steel frame with a large transparent observation window
- LED light strip illuminates the print area in low light
- 5-minute installation with a four-way pneumatic interface
Cons
- Made for the Bambu Lab A1 Combo only
- No warranty term is stated
- 838x588x588MM size needs a large bench
- No fan or ventilation holes are stated

TOPCUBE 3D Printer Enclosure for Bambu Lab A1
A grey enclosure for the Bambu Lab A1, with an LED light and a stated cut from 60 decibels to 40 decibels.
Pros
- Noise cut from 60 decibels to 40 decibels, per the maker
- Large transparent observation window with an LED light strip
- 5-minute installation with a sturdy frame
- Stated 1 year warranty
Cons
- 580X670X670MM size needs a large bench
- Made for the Bambu Lab A1 only
- No fan or ventilation holes are stated
- No four-way pneumatic interface is stated, unlike the A1 Combo cover

VEVOR 3D Printer Enclosure
An Oxford cloth tent for Creality, ELEGOO and Anycubic printers, with LED lighting and ventilation holes for an add-on fan.
Pros
- Fully enclosed structure isolates noise
- Fits Creality Ender 3 models, Anycubic and ELEGOO printers
- LED light and transparent window for a full view of the print
- Ventilation holes for optional fan installations
Cons
- No decibel figure is stated
- No warranty term is stated
- Ventilation components are not included
- 21.6 x 25.6 x 29.5 in size needs a large bench

Creality 3D Printer Enclosure Fireproof
A folding 480 x 600 x 720 mm tent for Ender 3, Ender 5, Anycubic Kobra and ELEGOO Neptune 3 printers, with a flame resistance check passed and a pure aluminum film interior.
Pros
- Passed a flame resistance check
- Pure aluminum film interior
- Folding storage, easy to carry
- Tool pockets for small tools
Cons
- Listing names iron pipes and glass fiber rod pipes for the frame
- No warranty term stated
- No LED light stated
- No ventilation system stated
Are 3D Printers Loud?
The short answer is yes. A printer makes sound through a print. The maker of the TOPCUBE cover states the level drops from 60 decibels to 40 decibels inside a full enclosure.
Noise is not the only reason to cover a printer. The TOPCUBE maker states its cover holds a steady temperature, keeps dust off the print and keeps particles inside while PLA, TPU or ABS prints. A cover with a window and a light lets the maker watch the print without opening it.
How loud is a 3D printer in decibels?
The only decibel figure in this guide comes from the TOPCUBE maker, which states the level falls from 60 decibels to 40 decibels inside its enclosure. The VEVOR tent (on Amazon) and the Creality cover state no decibel figure, so their noise cut cannot be compared in numbers.
How to quiet a 3D printer
Start with a full enclosure. The TOPCUBE maker states a cut from 60 decibels to 40 decibels for its covers, and the VEVOR tent states that its fully enclosed structure isolates noise. Match the cover to the printer first: the TOPCUBE pair is made for the Bambu Lab A1 and A1 Combo, the VEVOR tent fits Creality, ELEGOO and Anycubic models, and the Creality cover fits the Ender 3 family. Check the size against the printer before ordering, since the TOPCUBE and VEVOR listings ask the buyer to verify the dimensions.
Then keep the printer steady and the cover closed. The TOPCUBE maker states its sturdy construction reduces vibration during the print, and a transparent window with an LED light lets the maker watch the print without opening the cover. If fumes are a worry, the VEVOR tent has left ventilation holes for optional fan installations. Leave the cover closed while the print runs.
The gear that quiets the print
The four covers below are the enclosures in this guide, ranked by the scores on their cards. The TOPCUBE pair states the decibel cut, the VEVOR tent fits Creality, ELEGOO and Anycubic models, and the Creality cover fits the Ender 3 family.
FAQ: lasers and CNC
Does an enclosure make a 3D printer quieter?
Yes. The TOPCUBE maker states its fully enclosed cover blocks printing noise on all sides, with a cut from 60 decibels to 40 decibels. The VEVOR tent isolates noise with a fully enclosed structure.
What size enclosure fits a Bambu Lab A1?
The TOPCUBE A1 cover (on Amazon) measures 580X670X670MM, and the TOPCUBE A1 Combo cover (on Amazon) measures 838x588x588MM. Check the size against the printer before ordering, since the maker asks the buyer to verify the dimensions.
Do 3D printer enclosures need ventilation?
The VEVOR tent has left ventilation holes for optional fan installations, and the ventilation components are not included. The TOPCUBE covers state no ventilation holes.
Can a print be watched inside an enclosure?
Yes, if the cover has a window and a light. The TOPCUBE pair has a large transparent observation window with an LED light strip, and the VEVOR tent has a transparent window with LED lighting. The Creality cover names no window or light.
Are 3D printers loud at night?
Yes, a printer makes sound through a print. A full enclosure is one way to cut the sound, and the TOPCUBE maker states a cut from 60 decibels to 40 decibels inside its cover.
Related: the 3D printer hub, best 3D printer enclosure for Ender 3 and best large 3D printer enclosure with ventilation. See also the best 3D printing filament guide.




