Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

3D Printer Nozzle Types: Materials and Uses

Brass, hardened steel and quick-detachable nozzles compared by size, temperature and flow, with nozzle picks for FDM printers.

3D Printer Nozzle Types: Materials and Uses
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 18Pcs 3D Printer Upgraded Hardened Steel MK88Pcs 3D Printer Upgraded Hardened Steel MK89.7/10View on Amazon
  2. 2FLASHFORGE Adventurer 5M Series 3D Printer NozzleFLASHFORGE Adventurer 5M Series 3D Printer Nozzle9.6/10View on Amazon
  3. 3Official Creality 3D Printer Ender 3 0.4mm 5PCSOfficial Creality 3D Printer Ender 3 0.4mm 5PCS9.5/10View on Amazon
  4. 42 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened2 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened9.4/10View on Amazon

When a print clogs or a nozzle wears down, the fix often starts at the hotend, where filament melts and leaves through a small opening. Brass nozzles suit plain filament, hardened steel nozzles suit abrasive filament, and quick-detachable nozzle assemblies suit fast swaps. This guide explains 3d printer nozzle types by material, size, temperature and flow, so a maker can match a nozzle to filament and to the printer in use.

LaserEngraveHQ earns a commission when you buy through links on this site, at no extra cost to you.

8Pcs 3D Printer Upgraded Hardened Steel MK8

8Pcs 3D Printer Upgraded Hardened Steel MK8

Creality9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A set of 8 hardened steel MK8 nozzles in 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm and 1.0 mm sizes, with a tool storage box and 2 nozzle needles, for MK8 heating blocks and 1.75 mm filament.

Pros

  • Hardened steel with hardness beyond HRC60, for abrasive filament
  • Sizes from 0.2 mm to 1.0 mm in one set
  • Maximum temperature of 450℃, for PLA, ABS, carbon fiber and PEEK
  • Tool storage box and 2 nozzle needles included

Cons

  • Fits MK8 heating blocks and 1.75 mm filament, so fit depends on the heating block in use
  • The largest size in the set is 1.0 mm
  • The smallest size in the set is 0.2 mm
  • A set of 8 pieces needs storage for the nozzles, box and needles
FLASHFORGE Adventurer 5M Series 3D Printer Nozzle

FLASHFORGE Adventurer 5M Series 3D Printer Nozzle

FLASHFORGE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 0.4 mm quick-detachable nozzle assembly with a maximum temperature of 280℃ and high flow of 32mm³/s, for Adventurer 5M and 5M Pro printers.

Pros

  • 3S quick-detachable nozzle for fast swaps
  • Maximum temperature of 280℃ for versatile material compatibility
  • High flow of 32mm³/s for faster printing speeds
  • Made for Adventurer 5M and 5M Pro printers

Cons

  • 0.4 mm only, so no size choice in this assembly
  • Fits Adventurer 5M and 5M Pro only
  • Single nozzle assembly, so a maker who wants a spare needs a second assembly
  • Maximum temperature is 280℃, so a higher temperature needs a different nozzle
Official Creality 3D Printer Ender 3 0.4mm 5PCS

Official Creality 3D Printer Ender 3 0.4mm 5PCS

Creality9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 piece set of Creality 0.4mm brass MK8 nozzles for Ender 3, Ender 5 and CR-10 series printers.

Pros

  • 5 pieces, all 0.4mm, the widely used size
  • Brass MK8 nozzles with a long service life stated
  • Size engraved on each nozzle for easy identification
  • Fits Ender 3, Ender 5 and CR-10 series, and all 1.75mm PLA ABS printers

Cons

  • No warranty term is stated
  • Single size only, 0.4mm
  • No storage box is listed
2 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened

2 Pack 0.4mm A1 Mini/A1/A2L Hotend Kit Hardened

HzdaDeve9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack 0.4 mm hotend kit with hardened steel nozzles rated to 350°C, listed for the A1, A1 Mini and A2L.

Pros

  • Two hotends in the pack, each with a 0.4 mm hardened steel nozzle
  • Rated to 350°C, for ABS, ASA, PETG, PA and PC
  • Removable threaded nozzle, swappable in minutes
  • Hardened steel stated to outlast brass nozzles by up to 5-10 times

Cons

  • Only the 0.4 mm size; no 0.2 or 0.6 mm option
  • No warranty term is stated
  • Spec table part number names the A1 Mini only
  • 350°C ceiling sits below the P2S kit's 500–650°C range

3D Printer Nozzle Types by Material

Brass nozzles are the plain choice here, and the Creality brass pack gives 0.4 mm brass nozzles for Creality Ender 3, Ender 5 and CR-10 series printers. Hardened steel nozzles are the abrasive-filament choice: the Creality MK8 (on Amazon) set gives hardened steel nozzles with hardness beyond HRC60, and the HzdaDeve kit (on Amazon) gives a hardened steel nozzle for Bambu Lab A1 Mini, A1 and A2L printers. Quick-detachable assemblies are the fast-swap choice, and the FLASHFORGE assembly (on Amazon) gives a 3S quick-detachable nozzle for Adventurer 5M and 5M Pro printers.

Material decides which filament a nozzle handles. The Creality MK8 set lists PLA, ABS, carbon fiber and PEEK, at a maximum temperature of 450℃. The HzdaDeve kit lists heat resistance up to 350℃, and the FLASHFORGE assembly lists a maximum temperature of 280℃.

Nozzle Size and Flow

Size decides the opening that filament leaves through. The Creality MK8 set covers 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm and 1.0 mm, with 8 pieces in the set, so a maker can change size without buying a new set. The FLASHFORGE assembly, the HzdaDeve kit and the Creality brass pack each give a 0.4 mm opening. Flow also matters for speed, and the FLASHFORGE assembly lists high flow of 32mm³/s.

The Creality MK8 set includes a tool storage box and 2 nozzle needles for clearing clogs. The HzdaDeve kit includes 2 silicone socks, and the Creality brass pack gives 5 pieces for spares and swaps.

Temperature and Filament

Temperature decides which filament a nozzle can run. The FLASHFORGE assembly lists a maximum temperature of 280℃, the HzdaDeve kit lists heat resistance up to 350℃, and the Creality MK8 set lists a maximum temperature of 450℃. The Creality MK8 set lists compatibility with PLA, ABS, carbon fiber and PEEK, and with 1.75 mm filament.

Nozzle Picks for FDM Printers

The picks below cover the sizes, materials and temperatures above, for the nozzle swap at the hotend.

FAQ: lasers and CNC

What nozzle size should a maker choose?

Choose size from the print in hand. The Creality MK8 set covers 0.2 mm to 1.0 mm, while the other picks each give a 0.4 mm opening.

What is the difference between brass and hardened steel nozzles?

Brass nozzles suit plain filament, and hardened steel nozzles suit abrasive filament. The Creality brass pack gives 0.4 mm brass nozzles, while the Creality MK8 set gives hardened steel nozzles with hardness beyond HRC60, for PLA, ABS, carbon fiber and PEEK.

What temperature can a hardened steel nozzle reach?

Temperature depends on the nozzle in hand. The Creality MK8 set lists a maximum temperature of 450℃, and the HzdaDeve kit lists heat resistance up to 350℃.

Which nozzle fits a Creality Ender 3 printer?

The Creality MK8 set fits Ender 3, Ender 5 and CR-10 series printers, plus Sovol SV06, and the Creality brass pack fits Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 Max, Ender 5 series and CR-10 series printers.

Related: the 3D printers hub, the nozzle size guide and the nozzle temperature guide.

More buying guides

3D Printers ·

How Long Do 3D Printer Nozzles Last

Rough layers and weak bonding can signal a worn nozzle, so this guide explains how long 3D printer nozzles last, what wears them out,…