Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Improve 3D Print Quality

A step-by-step guide to cleaner layers and fewer failed prints: check the nozzle, dry the filament, level the bed and tune one slicer setting at a time.

How to Improve 3D Print Quality
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FLASHFORGE Rapid PLA Filament 1.75mm Ruby RedFLASHFORGE Rapid PLA Filament 1.75mm Ruby Red9.8/10View on Amazon
  2. 2Miailuy Silk PLA Filament 1.75mm+/-0.02mmMiailuy Silk PLA Filament 1.75mm+/-0.02mm9.7/10View on Amazon
  3. 3GIANTARM Silk Metallic Silver PLA 3D Printer Filament 1kgGIANTARM Silk Metallic Silver PLA 3D Printer Filament 1kg9.7/10View on Amazon

How to improve 3d print quality comes down to a short list of checks: the nozzle, the filament, the bed and the slicer settings. A worn or clogged nozzle, damp filament, a bed that is not level or a slicer setting that does not suit the model can each leave rough layers, gaps or stringing on a print. The sections below walk through each check in order, starting with the part that wears out first.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

The listings used here state no lab measurements for print quality settings, so this guide gives no temperatures, speeds or layer heights. Use the figures your filament maker and printer maker state, and change a single setting at a time so the cause of any change stays clear.

Check the nozzle before anything else

The nozzle is the last part the filament passes through before it becomes a printed line, so it is the first place to look when layers turn rough or uneven. Most of the nozzle kits in the listings used for this guide center on a 0.4mm nozzle, and one Creality kit (on Amazon) also lists 0.25mm, 0.6mm and 0.8mm sizes, so the size range is wide enough to cover fine detail and coarser work. A nozzle that is worn or partly clogged pushes filament unevenly, which shows up as gaps, blobs or a rough surface. The 3D printer nozzle types guide explains what each material and size is for, and how to change a 3D printer nozzle covers the swap itself.

Match the nozzle to the filament

Filament and nozzle have to agree with each other. The QIDI kit in the listings states a 1.75mm filament input diameter with a 0.4mm output diameter, so check the sizes your printer states before ordering spares. The kits here list PLA, ABS, PETG, TPE, TPU and PC among the materials they suit, and the maker of the hardened steel set says its nozzles resist high temperature and wear while keeping printing accuracy. Brass nozzles are the common choice for everyday filament, while stainless steel nozzles list better thermal conductivity and higher hardness than brass, according to the Lokkr listing. Pick the nozzle material for the filament you print most, not for the filament you might print one day. For the heat side of the match, see 3D printer nozzle temperature by filament type.

Dry filament prints cleaner

Filament that has picked up moisture is a common cause of stringing, popping and rough surfaces. Store spools sealed and dry between prints, and dry a spool that has been left out before blaming the printer. A filament dryer made for your printer keeps the spool dry while it prints. See the best filament dryer for Bambu guide if you print on a Bambu machine, and read how long to dry filament for the drying routine.

Level the bed and fix adhesion

A print that will not stick, or a first layer that is thin on one side and thick on the other, usually points at the bed. Level the bed with the routine your printer maker states, then check that the first layer goes down evenly across the whole bed. A clean bed surface matters as much as the level: residue from earlier prints keeps new filament from gripping. The 3D printer adhesion problems guide walks through the causes and fixes in detail.

Clean the nozzle and the filament path

Clogs build up slowly, so clean the nozzle before the problem is visible in a print. The maintenance kit in the listings holds 20 flexible stainless steel pins in 5 sizes, copper wire brushes, L-shaped wrenches, tweezers and a storage tube, and its maker says to heat the nozzle before using the copper brushes. The maintenance kit lists cleaning needles from 0.15mm to 0.5mm, and several nozzle kits include 5 cleaning needles with the nozzles. A 10-piece nozzle kit keeps spares on hand, so a nozzle that will not clear can be swapped instead of cleaned again. For the routine, read best way to clean a 3D printer nozzle and how to use cleaning filament.

Tune the slicer one setting at a time

Slicer settings are the last place to look, not the first. Fix the nozzle, the filament and the bed first, then change a single slicer setting and print a small piece to see the result. Changing several settings at once hides which one helped, so keep notes on what changed and what the print looked like after. PTFE tubing is part of the filament path too: a worn tube adds drag that shows up as uneven extrusion, and the PTFE tubing sizes chart for 3D printers lists the sizes to check against your printer.

Know when to swap the nozzle

A nozzle does not last forever, and swapping it beats another run of failed prints. Swap it when cleaning no longer clears the clogs, when the opening has worn wider than the size it states, or when layer lines stay rough after the bed and filament checks pass. The how long 3D printer nozzles last guide explains the wear signs in detail. Keep a spare set on hand: the 10-piece kits in the listings cover the common 0.4mm size, so a fresh nozzle is ready when the old one gives up.

How to improve 3d print quality: the short version

  1. Check the nozzle: clear clogs, and swap a worn nozzle for a fresh one of the same size.
  2. Match the nozzle material and size to the filament you print most.
  3. Dry the filament and store spools sealed between prints.
  4. Level the bed and clean the surface before the first layer goes down.
  5. Change a single slicer setting at a time and print a small piece to check it.

Work through the list in order and the print usually tells you which step fixed it.

FAQ: lasers and CNC

What nozzle size is best for detailed prints?

A smaller nozzle can lay down a narrower line, so the 0.25mm size in the Creality kit suits fine detail, while the 0.4mm size suits everyday prints. Larger sizes such as 0.6mm and 0.8mm suit prints where a coarser line is fine. Match the size to the detail in the model, not to the printer.

How do I know if my nozzle is clogged?

Gaps in the layers, thin lines that stop and start, or filament that curls up as it leaves the nozzle all point at a clog. Clear it with a cleaning needle or a pin from a maintenance kit, and swap the nozzle if cleaning does not clear it.

Does the filament type change print quality?

Yes. The kits here list PLA, ABS, PETG, TPE, TPU and PC, and each material behaves differently in the nozzle and on the bed. Use a filament your printer maker lists as compatible with your printer, and keep the nozzle material matched to the filament.

How often should I clean the nozzle?

Clean it before clogs show in a print, and again whenever prints show gaps, blobs or rough layers or after a filament change that leaves residue behind. A cleaning needle or a pin kit clears most clogs, and cleaning filament can push residue out of the hot end.

Can a new nozzle fix rough prints?

It can when the old nozzle is worn or clogged, but a new nozzle will not fix damp filament or an unlevel bed. Work through the nozzle, filament and bed checks first, then swap the nozzle if the rough layers stay.

What size filament does my printer take?

The QIDI kit in the listings states a 1.75mm filament input diameter. Check the size your printer maker states before ordering filament or nozzles, and match the nozzle kit to that size.

Related: the 3D printers hub, best 3D printer for beginners with multiple colors and easiest 3D printer for beginners. Also see the 3D printer nozzle types guide and how to change a 3D printer nozzle.

More buying guides

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.