Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Filament Dryer for Bambu (2026): 4 Picks for AMS and Standalone Drying

Four filament dryers for Bambu work, from an AMS chamber upgrade to standalone boxes, compared by spool capacity, temperature and humidity control.

Best Filament Dryer for Bambu (2026): 4 Picks for AMS and Standalone Drying
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EIBOS TetrasBest OverallEIBOS Tetras9.7/10View on Amazon
  2. 2SUNLU S4Best Standalone DryerSUNLU S49.6/10View on Amazon
  3. 3SUNLU S2Large Screen ControlSUNLU S29.4/10View on Amazon

Damp filament shows up in Bambu prints as stringing, rough layers and weak extrusion, and the problem grows when spools sit open between jobs or feed an AMS through long prints of signs, brackets and functional parts. Makers who run mixed materials need dry spools during the print and dry storage between prints. This guide compares the best filament dryer for bambu in AMS upgrade and standalone box formats.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall EIBOS Tetras: Four independent AMS chambers with dedicated heater, fan and sensors in each slot, rated at 20℃-65℃ for drying while printing. Check price on Amazon
  • Best Standalone Dryer SUNLU S4: Standalone box for 4 x 1kg spools with heat to 70℃ from a 350W PTC heater and humidity control. Check price on Amazon
  • Large Screen Control SUNLU S2: Storage dryer box with large screen control and 70℃ max temperature for TPU, PLA, PETG and ABS. Check price on Amazon

Machines on the list

【EIBOS Official】 3D Printer Filament Dryer Tetras

【EIBOS Official】 3D Printer Filament Dryer Tetras

EIBOS9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An AMS heater upgrade with 4 independent chambers for Bambu Lab AMS, rated at 20℃-65℃ for drying while printing.

Pros

  • 4 independent chambers, each with dedicated heater, fan, interface and sensors
  • Dries while printing on its own power, with time stated as 30mins -24hrs or unlimited
  • Auto-venting exhaust cover and automatic sealing with humidity monitoring
  • Covers PLA, ABS, PETG, TPU and Nylon with separate settings per slot

Cons

  • AMS is not included and fit is for Bambu Lab AMS Gen 1
  • Max temperature is 65℃, below the 70℃ figure on the SUNLU picks
  • US version runs on 110V power
  • Weight is 8.82 pounds for the add-on unit
SUNLU Official Filament Dryer S4

SUNLU Official Filament Dryer S4

SUNLU9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A standalone dryer for 4 x 1kg spools with heat to 70℃, a 350W PTC heater and humidity control.

Pros

  • Holds 4 x 1kg spools in a 450x210x211mm interior for simultaneous drying
  • Heat to 70℃ from a 350W PTC heater with 3 circulation fans
  • Humidity control triggered at 30-50% RH and stops under 25% RH
  • Supports 1.75mm, 2.85mm and 3.0mm diameters for up to 4 printers

Cons

  • Standalone box format, not an AMS chamber upgrade
  • Weight is stated as 10.58 pounds
  • Dimensions are stated as 18.03 inches x 8.58 inches x 12.28 inches
  • Humidity control stops under 25% RH at the stated threshold
SUNLU Filament Dryer S2, Black

SUNLU Filament Dryer S2, Black

SUNLU9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A filament dryer with a maximum temperature of 70°C, customizable time from 0 to 99 hours and a large touchscreen.

Pros

  • Temperature customizable from 35 to 70°C and time from 0 to 99 hours
  • Dries filament during printing, with a built-in spindle for even drying
  • Large capacity of 265x274x118 mm, for 1.75 mm, 2.85 mm and 3.00 mm filaments
  • Translucent lid allows checking filament without opening the lid

Cons

  • No warranty term is stated
  • No heater wattage is stated
  • No safety feature is stated
  • Capacity is given as 265x274x118 mm, with no spool count stated
Comgrow 3D Printer Filament Dryer Box

Comgrow 3D Printer Filament Dryer Box

Comgrow9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A filament dryer box storing 2 rolls of 1kg spools, with a 40°~ 50 °C range and a 2-inch LCD screen.

Pros

  • Stores 2 rolls of 1kg spools during printing
  • Inner size of 9.29*6.49*9.13 inch for standard spools
  • Adjustable temperature range of 40°~ 50 °C with 6 to 12 hour setting time
  • Silicone cable sheath and Teflon tube outlet for smooth feeding

Cons

  • No warranty term is stated
  • Maximum temperature is only 50°C
  • Single temperature range against the SUNLU wider range
  • No food use is stated, filament drying only

Other machines to compare

Specs compared

Model HQ Score Spools Max temp Filaments Warranty
EIBOS Tetras 9.7/10 4 chambers 65℃ PLA, ABS, PETG, TPU, Nylon 1 Year Warranty
SUNLU S4 9.6/10 4 spools 70℃ Nylon, TPU, PLA, PETG, ABS 1 Year
SUNLU S2 9.4/10 Not stated 70℃ TPU, PLA, PETG, ABS Not stated
Comgrow SH01 9.4/10 Not stated Not stated PLA, PETG, ABS Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (19 November 2026).

AMS upgrades and standalone boxes solve different problems

An AMS upgrade dries spools where they already sit for printing. The maker lists the EIBOS Tetras with 4 independent chambers for Bambu Lab AMS Gen 1, each slot with a dedicated heater, fan, interface, temperature sensor and humidity sensor. Temperature is stated as 20℃-65℃ and drying time as 30mins -24hrs or unlimited, with drying while printing on its own power. The AMS is not included, so this format suits a Bambu owner who already runs an AMS and wants separate settings per spool. See the wider 3D printer hub for printer context.

A standalone box dries spools away from the printer and can feed several machines. The maker lists the SUNLU S4 with a 450x210x211mm interior for 4 x 1kg spools, heat to 70℃ from a 350W PTC heater, and support for up to 4 printers at the same time. That format suits Bambu owners who also run other FDM printers, or who want storage drying between prints without changing the AMS. The two storage boxes in this guide state less: the SUNLU S2 states large screen control and 70℃ max temperature, and the Comgrow SH01 states a spool holder format, with spool capacity Not stated for both.

How to choose the best filament dryer for bambu

Match chambers to your AMS work

Mixed-material AMS prints need separate settings when filaments differ. Tetras is stated for PLA, ABS, PETG, TPU and Nylon with separate control in each chamber, plus forced-air circulation and an exhaust cover that lifts to expel moisture. Automatic sealing and humidity mode are stated for storage after the cycle. A standalone box shares one space across spools, as on the SUNLU S4 with 3 circulation fans and surround heating stated as 360° surround heating. Compare chamber format before temperature figures when AMS work drives the choice.

Temperature and humidity control

Max temperature figures are 65℃ on the EIBOS Tetras and 70℃ on the SUNLU S4 and SUNLU S2, with Comgrow SH01 max temperature Not stated. Humidity control differs in stated thresholds: the SUNLU S4 is stated as triggered at 30-50% RH and stops under 25% RH, while Tetras humidity mode monitors internal conditions and reactivates heating when humidity rises. Drying time on Tetras is stated as 30mins -24hrs or unlimited. Keep maker figures as stated figures when you compare drying cycles for Nylon, TPU, PLA, PETG and ABS.

Spool count, diameters and placement

Spool figures are stated as 4 chambers on Tetras and 4 x 1kg spools on the SUNLU S4, with spool capacity Not stated on the SUNLU S2 and Comgrow SH01. Diameters are stated as 1.75mm, 2.85mm and 3.0mm on the SUNLU S4, and as 1.75mm and 2.85mm on the Comgrow SH01. Placement figures include Tetras dimensions of 14.17 inches x 11.42 inches x 5.31 inches at 8.82 pounds, and SUNLU S4 dimensions of 18.03 inches x 8.58 inches x 12.28 inches at 10.58 pounds. Power on Tetras is stated as US version, 110V.

Safety

Filament dryers use heaters and fans for long cycles. Place the dryer on a stable surface with clear airflow, keep spools and packaging clear of heating parts, and follow the maker instructions for loading, venting and storage. Let hot parts cool before handling spools after a cycle.

Project Match

  • Mixed-material AMS prints in PLA, ABS, PETG, TPU and Nylon: EIBOS Tetras, with 4 independent chambers stated for Bambu Lab AMS Gen 1.
  • Standalone drying for several printers at the same time: SUNLU S4, stated for up to 4 printers with 4 x 1kg spools.
  • Storage drying with screen control: SUNLU S2, with large screen control and 70℃ max temperature stated; spool capacity Not stated.
  • Storage with a spool holder during printing: Comgrow SH01, stated for PLA, PETG and ABS; max temperature Not stated.

How the scores add up

Each dryer is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the maker does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
EIBOS Tetras 9.7 32 21 21 5 2
SUNLU S4 9.6 29 20 20 7 2

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.

FAQ: lasers and CNC

Can I dry filament while printing on a Bambu Lab AMS?

The maker lists the EIBOS Tetras for drying while printing, with each chamber supporting independent temperature control from 20℃-65℃ on its own power. Fit is stated for Bambu Lab AMS Gen 1, and the AMS is not included.

What temperature do these filament dryers reach?

Stated figures are 20℃-65℃ on the EIBOS Tetras, heat to 70℃ on the SUNLU S4, and 70℃ max temperature on the SUNLU S2. Max temperature on the Comgrow SH01 is Not stated.

Which filaments do these dryers cover?

Stated materials are PLA, ABS, PETG, TPU and Nylon on the EIBOS Tetras; Nylon, TPU, PLA, PETG and ABS on the SUNLU S4; TPU, PLA, PETG and ABS on the SUNLU S2; and PLA, PETG and ABS on the Comgrow SH01.

How many spools fit in each dryer?

Stated capacity is 4 chambers on the EIBOS Tetras and 4 x 1kg spools on the SUNLU S4. Spool capacity on the SUNLU S2 and Comgrow SH01 is Not stated.

Related: best large filament dryer, best filament dryer for nylon, how long to dry filament and the 3D printer hub.

More buying guides

3D Printers ·

Is a Filament Dryer Worth It?

A practical guide to whether a filament dryer is worth it: what wet filament does, how dryers work, and when sealed storage is enough.