Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to 3D Print for Beginners: First Steps

A step-by-step guide to how to 3d print for beginners: pick a printer, set up the workspace, load filament, level the bed and start the first print.

How to 3D Print for Beginners: First Steps
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 116-Color PETG Filament Bundle16-Color PETG Filament Bundle9.6/10View on Amazon
  2. 2YOOPAI 3D Printer Scraper ToolYOOPAI 3D Printer Scraper Tool9.6/10View on Amazon
  3. 3FLASHFORGE High Speed PLA+ 3D Printer Filament BlackFLASHFORGE High Speed PLA+ 3D Printer Filament Black9.6/10View on Amazon

How to 3d print for beginners starts with a small goal: turn a digital model into a solid object on a printer that sits on a desk or a bench. The process has the same shape every time: choose a printer, set it up in a ventilated space, load filament, level the bed, slice the model into layers and let the printer build it up layer by layer. This guide walks through each move in order.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

Every figure in this guide comes from the printer listing cited below. Where a figure is not listed, this guide says so instead of guessing, and no speed or size claim here comes from another model.

Choose a printer that fits a first project

A beginner printer should be easy to set up, easy to level and forgiving when a print goes wrong. Look for automatic bed leveling, a clear screen and a slicer with profiles for common filament. The printer cited here, the ELEGOO Centauri Carbon 2 Combo, lists 1-click auto leveling, which removes the manual step that trips up many first prints. Read what 3D printer should I get and the easiest 3D printer for beginners page before narrowing the list.

Build volume decides the largest object the printer can make in a single job. The maker lists a 256x256x256mm build volume for the ELEGOO Centauri Carbon 2 Combo, which covers small household parts, desk organizers, planters and figurines. The maker lists speeds up to 500 mm/s and acceleration of 20,000 mm/s² for this model, with a nozzle rated at 350°C. The same listing also offers 4-color printing, which prints a multicolor model without swapping filament by hand.

Set up the printer and the workspace

Put the printer on a flat, stable surface where the frame will not wobble during a print, with clear space on every side so the bed and the print head can move freely. A room with fresh air matters, because melted filament gives off fumes, so open a window or run a fan that moves air out of the room. An enclosed printer helps contain heat and drafts, and the enclosed 3D printer for beginners page explains what an enclosure changes. The guide to making a 3D printer quieter covers fans and enclosures that cut noise near a living space.

Keep filament dry and out of direct sun. Filament that has soaked up moisture can hiss, bubble and leave a rough surface, so store open spools in a sealed box or bag with desiccant. Check whether the printer ships with a spool in the box; the page on whether 3D printers come with filament explains what to look for.

Load filament and level the bed

PLA is the usual starting filament: it prints at modest heat, sticks well to a clean bed and comes in many colors. Cut the end at an angle, feed it into the extruder until it grips, then heat the nozzle and push a short length through until it flows cleanly. If the flow curls or sputters, the nozzle may be partly blocked; the best way to clean a 3D printer nozzle page walks through the fix.

Bed leveling sets the gap between the nozzle and the bed so the first layer squashes flat without scraping. On a printer with 1-click auto leveling, run the routine from the screen and let the printer measure the bed itself, then check with a thin sheet of paper slid under the nozzle. The paper should drag slightly but still move. A gap that is too wide leaves loose lines that peel up, while a gap that is too tight scrapes the bed.

Slice the model and start the print

A slicer turns a digital model into the layers and toolpaths the printer follows. Load a model, pick a layer height and infill from the slicer profile, and preview the result before sending it to the printer. A simple calibration cube or a small vase is a good trial model: it prints fast, shows layer lines clearly and wastes little filament if it fails. Save the file to the printer, start the job from the screen and stay nearby while the first layer goes down.

The first layer is the foundation of the whole print. Watch it lay down in even lines that touch each other with no gaps and no curling at the corners. If lines lift, stop the print, re-level the bed and clean the surface before trying again. A failed first layer never improves on its own, and stopping early saves filament and time.

Watch the print and finish the part

Once the first layers hold, check in from time to time for loose filament, a part that has shifted or a spool that has stopped feeding. When the print ends, let the bed cool before removing the part; many parts pop free on their own as the bed cools, and prying at a hot part can bend it. Trim brims and supports with flush cutters and sand rough edges lightly.

Keep notes on each print: the filament, the slicer profile and what went wrong or right. Those notes make the next print easier to set up. The guide to improving 3D print quality is a good next read once the basics feel steady, since it covers the small changes that sharpen layer lines and corners.

Fix the common first-print problems

  • Print will not stick: clean the bed, re-level and check the first-layer gap. The adhesion problems guide lists the usual causes and fixes.
  • Stringing between parts: fine threads between separate sections usually point to retraction or heat settings in the slicer profile. Adjust a setting and reprint a small model.
  • Warped corners: corners that lift often come from drafts or a bed that is too cool for the filament. Move the printer out of direct drafts and check the slicer profile.
  • Rough surface: damp filament or a partly blocked nozzle can cause uneven flow. Dry the spool and clean the nozzle; the nozzle types guide explains which nozzle suits each filament.
  • Shifted layers: a part that slides mid-print or a belt that slips can shift whole layers sideways. Check that the part is stuck fast and that nothing blocks the bed.

How to 3D Print for Beginners: the short version

  1. Pick a printer with auto leveling and a build volume that fits the project list.
  2. Set it on a stable surface in a ventilated room and keep filament dry.
  3. Load PLA, heat the nozzle and level the bed.
  4. Slice a small trial model and preview it before printing.
  5. Watch the first layer, then let the print run.
  6. Let the bed cool, remove the part and trim supports.
  7. Note what worked, fix what did not and print again.

FAQ: lasers and CNC

What filament should a beginner start with?

PLA is the usual starting point. It prints at modest heat, sticks well to a clean bed and forgives small setup errors better than filaments that need high heat or an enclosure.

How long does a first print take?

It depends on the size of the model, the layer height and the infill. A small trial model finishes quickly, while a large or dense model can run for hours. The slicer shows an estimate before the print starts.

Do I need an enclosed printer to start?

Not for PLA and other easy filaments, which print well on an open printer in a ventilated room. An enclosure helps with filaments that warp in drafts and with keeping heat steady.

What if the print will not stick to the bed?

Clean the bed, re-level it and check the first-layer gap. A bed that is dirty, uneven or too far from the nozzle is the usual cause. If the problem continues, the adhesion guide linked above walks through the remaining fixes.

Can a beginner print in several colors?

Yes, with a printer that supports it. The ELEGOO Centauri Carbon 2 Combo lists 4-color printing, which switches filament during the print without manual swaps.

Related: the 3D printer hub, best 3D printer for beginners with multiple colors and easiest 3D printer for beginners. Also see the how to improve 3D print quality guide.

More buying guides

3D Printers ·

How Much Does 3D Print Filament Cost?

A plain guide to what sets the cost of 3D print filament, from material and spool size to the print itself, and how to…

3D Printers ·

Can Resin Printers Print Multiple Colors?

Resin printers can print in multiple colors by swapping resin mid-print, printing parts in separate colors, or painting the finished model, and this guide…

3D Printers ·

How to Improve 3D Print Quality

A step-by-step guide to cleaner layers and fewer failed prints: check the nozzle, dry the filament, level the bed and tune one slicer setting…