Can Drill Bits Go Through Metal? Bits to Use
Yes, with the right bit: cobalt for hardened metal, stainless steel and cast iron, and HSS for general metal, in sizes from 3/64 to 1/2 inch.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ANGELSWORD M35 Cobalt Drill Bit Set for Metal9.7/10View on Amazon - 2
29Pcs Cobalt Drill Bit Set M35 High Speed Steel9.6/10View on Amazon - 3
ENERTWIST 230 PCS Drill Bit Kit Set for Metal9.6/10View on Amazon - 4
Hi-Spec SAE HSS Drill Bit Set for Metal9.5/10View on Amazon
A steel bracket that needs mounting holes, a plate for a jig, a panel for an enclosure: the job starts the same way, with a drill bit pressed against metal and a question about whether the bit can cut it. Can drill bits go through metal? Yes, with a bit made for metal. The sets below show what that takes in practice.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Each pick below is described from what the maker states for that set: bit material, point shape, size range and stated materials.

ANGELSWORD M35 Cobalt Drill Bit Set for Metal
A 29-piece M35 cobalt set with a stepped point, titanium coat and 3-flat shank, sized 1/16 to 1/2 inch for steel, cast iron, aluminum, brass and sheet metal.
Pros
- Stepped point skips the pilot hole, per the maker
- M35 cobalt with 5% cobalt for wear resistance and hot hardness
- Titanium coat adds heat resistance and rust protection
- 3-flat anti-slip shank for stable control
Cons
- Largest size is 1/2 inch, so larger holes need a different bit
- No storage case is described
- 29 pieces, fewer sizes than the 230-piece kit
- Stainless steel and hardened metal are not among its stated materials

29Pcs Cobalt Drill Bit Set M35 High Speed Steel
A 29-piece M35 cobalt twist set with a 135-degree split point, fully ground flutes and a metal index box, sized 1/16 to 1/2 inch.
Pros
- M35 cobalt with 5% cobalt for heat resistance and hardness
- 135-degree split point self-centers to prevent walk-off
- Fully ground twist clears particles and runs cooler, per the maker
- Metal index storage box keeps sizes organized
Cons
- No warranty term is stated
- Largest size is 1/2 inch, so larger holes need a different bit
- 29 pieces, fewer sizes than the larger kits here
- Round straight shank has no anti-slip flats

ENERTWIST 230 PCS Drill Bit Kit Set for Metal
A 230-piece titanium-coated HSS kit with a 118-degree tip, sized 3/64 to 1/2 inch, in a tough case for metal, wood, fiberglass and plastics.
Pros
- 230 pieces cover metal, wood, fiberglass and plastics
- Titanium coating reduces heat buildup; maker claims 6 times longer life
- Sizes from 3/64 to 1/2 inch in an indexed tray
- Tough plastic case with sponge cushion keeps bits organized
Cons
- No warranty term is stated
- Not for concrete or masonry, per the maker
- HSS rather than cobalt, so hardened metal is not its stated strength
- 118-degree conventional tip has no self-centering claim

Hi-Spec SAE HSS Drill Bit Set for Metal
A 99-piece titanium-coated HSS set with 14 SAE sizes from 1/16 to 3/8 inch, in a slimline tray case, for metal, wood, plastics and drywall.
Pros
- 99 pieces with 14 SAE sizes for metal, wood, plastics and drywall
- Titanium nitride coating reduces friction and wear
- Slimline tray case with foam insert and metal catch
- HSS4241 steel for cutting speed and heat resistance, per the maker
Cons
- Largest size is 3/8 inch, below the 1/2 inch top size of the other sets
- 14 SAE sizes, a narrower range than the 29-size cobalt sets
- HSS rather than cobalt, so hardened metal is not its stated strength
- No split-point or stepped-point claim is stated
Can Drill Bits Go Through Metal?
Yes. A drill bit goes through metal when its material is harder than the piece and its point can start the hole without walking. The SEDIANAS cobalt set lists hardened metal, stainless steel, cast iron, high temperature alloy and titanium alloy, while the ANGELSWORD set lists steel, cast iron, aluminum, brass and acrylics. The HSS sets list general metal, wood and plastics, with drywall on the Hi-Spec set. Point shape decides how the hole starts: the 135-degree split point centers itself and prevents walk-off, while the ANGELSWORD stepped point drills without a pilot hole, per its maker, and the SEDIANAS fully ground twist clears particles faster and cuts friction and heat.
Cobalt or HSS: Which Bit Material for Metal
M35 cobalt with 5% cobalt offers greater hardness and heat resistance than ordinary bits, and the SEDIANAS and ANGELSWORD sets both use it. HSS takes a different route: the Hi-Spec set uses HSS4241 with a titanium nitride coating that cuts friction and wear, and the ENERTWIST set uses titanium-coated HSS that reduces heat buildup. The ENERTWIST maker claims the coating lasts 6 times longer than conventional bits. See drill bit material types and drill bit types for metal for the materials behind these claims. The short rule: hardened metal, stainless steel and cast iron point to M35 cobalt, while general metal, wood and plastics suit titanium-coated HSS.
How to Drill Through Metal With These Sets
Start by matching the hole to a size in the set. The cobalt sets run 1/16 to 1/2 inch, the ENERTWIST kit runs 3/64 to 1/2 inch, and the Hi-Spec set runs 1/16 to 3/8 inch, so check the largest size before ordering. Then let the point shape do the starting: a split point centers itself on the mark, and the ANGELSWORD stepped point skips the pilot hole, per its maker. Hold the drill square to the surface and let the flutes clear the chips. When the maker says a set is not for concrete or masonry, as ENERTWIST does, keep it off those materials.
Drill Bit Sets for Metal
The sets below cover the sizing and point shapes the sections above call for.
Common Mistakes to Avoid
- Using a set on concrete or masonry when the maker rules it out.
- Ordering a set whose largest bit is 3/8 inch when the hole needs 1/2 inch.
- Grabbing the wrong size instead of using the indexed tray.
- Starting a hole with a plain point on slick metal instead of a split point.
Can Drill Bits Go Through Metal? The Short Version
Yes. Match the bit material to the metal, pick the size from the set, and let the point center the hole.
- Hardened metal, stainless steel and cast iron point to M35 cobalt.
- General metal, wood and plastics suit titanium-coated HSS.
- Split points center the bit; the ANGELSWORD stepped point skips the pilot hole, per its maker.
FAQ: lasers and CNC
Can a regular drill bit go through metal?
Yes, when the bit is made for metal: the HSS sets list metal, and the SEDIANAS cobalt set lists hardened metal, stainless steel and cast iron.
What drill bit is best for stainless steel?
A cobalt bit. The SEDIANAS set lists stainless steel, and its 135-degree split point centers itself to prevent walk-off.
Do you need a pilot hole to drill metal?
Not always. The ANGELSWORD stepped point drills without a pilot hole, according to its maker, and a split point centers itself so the bit starts on the mark.
What size drill bits do I need for metal?
The cobalt sets cover 1/16 to 1/2 inch, the ENERTWIST kit covers 3/64 to 1/2 inch, and the Hi-Spec set covers 1/16 to 3/8 inch.
Can drill bits go through sheet metal?
Yes. The ANGELSWORD set lists steel, cast iron, aluminum, brass and acrylics, and its maker calls sheet metal its strongest use.
Related: the CNC tooling hub, best drill bit to drill through metal and best drill bit for drilling metal. Also see types of drill bits.




