How to Tap and Die: Cut Clean Threads by Hand
Cut internal and external threads by hand: pick the tap or die size, start it straight, and reverse to clear chips, with 4 SAE…
Bits and shop gear for CNC routers: end mills, V-bits, spoilboards, clamps and dust collection. The right bit and workholding matter as much as the machine.
Bare metal points to a fiber laser, clear acrylic to CO2, wood and leather on a budget to a diode, and thick stock or 3D carving to a CNC router. The Machine Finder narrows it down in five questions, and the material guide shows what each type can cut.
Cut internal and external threads by hand: pick the tap or die size, start it straight, and reverse to clear chips, with 4 SAE…
A guide to drill bit shank types: what a shank does, how the 1/4-inch hex shank fits impact drivers and drills, and the sizes…
A reamer size chart lists the sizes to pick from, from taper sets that align bolt holes to chucking reamers that finish holes on…
A drill bit sharpener guide that matches the point angle to the bit, sizes the sharpener to the bit, and grinds both sides evenly.
A reamer enlarges and finishes a hole that already exists: pick the size, turn it by hand, oil the cut and clear the chips.
ER32 collet sets for CNC engraving, milling and lathe work, with the ER40 side of the comparison not covered by any listed product.
A Forstner bit drills clean, flat-bottomed holes in wood and plastic when you mark the center, clamp the workpiece, and let the center spur…
Router bit shank sizes decide which bits fit your router, and this guide explains the common sizes, how to match the collet, and the…
A router bit speed chart sets a safe speed by bit diameter, and this guide shows how to read it from the sizes the…
Types of end mill explained by end shape, flute count, material, coating and size, with the figures the listings state here.