Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Er32 vs Er40 Collet: Which One Should You Buy?

ER32 collet sets for CNC engraving, milling and lathe work, with the ER40 side of the comparison not covered by any listed product.

Er32 vs Er40 Collet: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1𝐋𝐮𝐨 𝐤𝐞 ER11 Spring Collet Nut Set𝐋𝐮𝐨 𝐤𝐞 ER11 Spring Collet Nut Set9.7/10View on Amazon
  2. 2QWORK ER20 A Collet Clamping Nuts for CNC Milling ChuckQWORK ER20 A Collet Clamping Nuts for CNC Milling Chuck9.6/10View on Amazon
  3. 3Dremel 4485 Quick Change Rotary Tool Collet Nut Set 5 PieceDremel 4485 Quick Change Rotary Tool Collet Nut Set 5 Piece9.6/10View on Amazon
  4. 42pcs 1/2" ER32 Precision Spring Collets CNC Lathe Milling2pcs 1/2" ER32 Precision Spring Collets CNC Lathe MillingView on Amazon
  5. 53/8" ER32 Precision Spring Collets CNC Lathe Milling Chuck3/8" ER32 Precision Spring Collets CNC Lathe Milling ChuckView on Amazon
  6. 6findmall 8Pcs 1/8-3/4 Inch ER32 Collet Set 1/8"findmall 8Pcs 1/8-3/4 Inch ER32 Collet Set 1/8"View on Amazon
  7. 7findmall 12 Pcs 1/8"-3/4" ER32 ER-32 Collets Set With 9/16findmall 12 Pcs 1/8"-3/4" ER32 ER-32 Collets Set With 9/16View on Amazon
  8. 8findmall 12Pcs ER40 Collets Common Size 1/8"findmall 12Pcs ER40 Collets Common Size 1/8"View on Amazon

A spindle job stalls when the collet does not match the shank, so the choice starts with the tool in hand and the holder on the spindle. The question er32 vs er40 collet comes down to which size fits the shanks you run, and the gear shown here covers the ER32 side only: no ER40 collet appears in the gear shown here, so this guide names no ER40 pick. From the stated facts, ER32 is the pick when your shank sizes fall inside the ER32 sets shown here.

Other machines to compare

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Honest note

The gear shown here covers ER32 only, so this guide compares from the ER32 side and names no ER40 pick. Every size and accuracy figure below is stated by the maker of each ER32 set shown.

Match the collet to your shank size

A collet grips the shank of the tool, so the collet size must suit the shank it holds. The SILIVN set lists sizes from 1/32 inch to 13/16 inch, the findmall set lists sizes from 1/8 inch to 3/4 inch, and the uxcell and F.L.S sets each cover 1/2 inch. Pick the set that covers the shank sizes your work needs, and check the size list before ordering. For the cutters that go in the collet, see the best 1/8 downcut CNC bit guide, the 1/4 vs 1/2 inch end mill comparison.

Read the accuracy each maker states

Read the stated accuracy figure before ordering. The findmall set states 0.0003 inch, also given as 5um. The uxcell collets state 0.015mm, also given as 0.0006-inch. The F.L.S collets state accuracy under 0.015. The SILIVN set states no accuracy figure.

Choose a set or 2 pieces

A set covers a range of shank sizes, while 2 pieces cover a size of 1/2 inch, so the shape of your tool drawer decides the shape of the order. The SILIVN set holds 26 pieces, the findmall set holds 8 pieces, and the uxcell and F.L.S sets hold 2 pieces each, all at 1/2 inch. When your shanks span a range, a set keeps every size together; when every shank is 1/2 inch, 2 pieces are enough.

Check the holder fit

The maker lists the findmall set as fitting R8, CNC ER32 chucks or holder, and every set shown here names lathe as a compatible device, with the findmall set also naming drilling machine, grinding machine and milling machine. Check the holder fit before ordering. The spindle vs router for CNC guide covers the spindle side of the same choice.

The ER32 gear shown here

The gear below is in rank order, from the widest size range to the narrowest pick, with each set described as its maker states it.

SILIVN ER32 spring collet set with 26 pieces. The set holds 26 pieces in sizes from 1/32 inch to 13/16 inch, made of spring steel, with each collet individually labeled and packaged. The maker lists boring, milling, drilling, tapping, engraving, CNC and spindle machines as uses, with a 12-month satisfaction customer service. It suits a shop that needs the widest range of shank sizes. It does not suit a buyer whose shanks all share a size.

findmall ER32 collet set with 8 pieces. The set holds 8 pieces in sizes from 1/8 inch to 3/4 inch, made of spring steel, with a stated accuracy of 0.0003 inch, also given as 5um. The maker lists fit for R8, CNC ER32 chucks or holder, with drilling machine, grinding machine, lathe and milling machine as compatible devices. It suits a shop that wants a stated accuracy figure with a mid-size range. It does not suit a buyer who needs sizes below 1/8 inch or above 3/4 inch.

uxcell ER32 spring collet, 1/2 inch, 2 pieces. The set holds 2 pieces at a 1/2-inch clamping diameter, made of 40Cr steel, with a stated precision of 0.015mm, also given as 0.0006-inch. The maker lists machining centers, general milling machines, CNC milling machines, engraving machines and high-speed machines as uses. The maker states a package count of 1 alongside 2 pieces; check the count before ordering. It suits a shop that needs a 1/2-inch collet in 40Cr steel with a stated precision figure. It does not suit a buyer who needs any size other than 1/2 inch.

F.L.S ER32 precision spring collets, 1/2 inch, 2 pieces. The set holds 2 pieces at a 1/2-inch hole diameter, made of 45 steel, with a stated accuracy under 0.015. The maker lists a weight of 0.28 kg and a capacity of 0.5 inches, with lathe as the compatible device. It suits a shop that needs a 1/2-inch collet for lathe work. It does not suit a buyer who needs any size other than 1/2 inch.

Seat the collet and tighten the holder

Seat the collet in the nut, slide the shank into the collet bore, and tighten the holder. A shank that sits short of the collet bore will not grip true, so seat the shank fully before tightening. When the choice is between a collet and a chuck, the collet vs drill chuck for CNC guide covers the trade-offs.

Keep the set labeled and stored together

Collets in a set look alike, so keep each collet with its set and keep the labels readable. The SILIVN set ships each collet individually labeled and packaged, which makes it easy to tell the sizes apart at a glance. Store the set where the collets stay clean and dry, and check the size marking before each use.

Common mistakes to avoid

  • Buying a collet size your shanks do not match.
  • Skipping the accuracy figure the maker states.
  • Fitting an ER32 collet into an ER40 holder, or the reverse.
  • Ordering a small set when the job needs a wider range of sizes.
  • Ordering without checking the holder fit.

er32 vs er40 collet: the short version

  1. Match your shank sizes to the ER32 sets shown here.
  2. Note that no ER40 collet is listed, so no ER40 pick is named.
  3. Read the accuracy each maker states before ordering.
  4. Check the holder fit.
  5. Pick the set that covers the sizes your work needs.
  6. Keep each collet labeled and stored with its set.

FAQ: lasers and CNC

What is the difference between an ER32 and an ER40 collet?

The gear shown here covers ER32 only, with the widest set listing sizes from 1/32 inch to 13/16 inch. No ER40 collet appears in the gear shown here, so this guide names no ER40 size and recommends no ER40 pick. Match your shank size to the ER32 set that covers it.

Which ER32 set shown here covers the most shank sizes?

The SILIVN set, with 26 pieces in sizes from 1/32 inch to 13/16 inch. The findmall set covers 8 pieces from 1/8 inch to 3/4 inch, and the uxcell and F.L.S sets cover 1/2 inch in 2 pieces each.

What accuracy do the ER32 collets shown here state?

The findmall set states 0.0003 inch, also given as 5um. The uxcell collets state 0.015mm, also given as 0.0006-inch. The F.L.S collets state accuracy under 0.015. The SILIVN set states no accuracy figure.

Do the ER32 collets shown here fit a lathe?

Each set shown here names lathe as a compatible device. The findmall set also names drilling machine, grinding machine and milling machine.

Should a buyer choose a set or just 2 pieces?

Buy a set when your shanks span a range of sizes: the SILIVN set covers 26 sizes and the findmall set covers 8. Buy 2 pieces when your shanks are 1/2 inch: the uxcell and F.L.S packs each cover 1/2 inch in 2 pieces.

Related: the collet vs drill chuck for CNC, 1/4 vs 1/2 inch end mill and spindle vs router for CNC guides. Also see the laser module vs spindle on CNC router guide and the best 1/8 downcut CNC bit picks.

More buying guides