Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Light Blue 3D Printer Filament (2026): 4 Picks for FDM Printers

4 light blue 3D printer filaments compared by type, diameter tolerance, spool size and print settings, with the stated specs and the gaps each listing leaves.

Best Light Blue 3D Printer Filament (2026): 4 Picks for FDM Printers
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUNLU PLA Sky BlueBest OverallSUNLU PLA Sky Blue9.7/10View on Amazon
  2. 2eSUN PLA+ Light BlueBest PLA+eSUN PLA+ Light Blue9.6/10View on Amazon
  3. 3ELEGOO Matte Ice BlueBest MatteELEGOO Matte Ice Blue9.6/10View on Amazon
  4. 4ELEGOO PLA Light BlueBest Glossy FinishELEGOO PLA Light Blue9.5/10View on Amazon

Light blue prints suit toys, desk organizers, planters and cosplay props, and the right filament makes the color pop without stringing or warping. The best light blue 3d printer filament for an FDM printer is a PLA spool with tight diameter tolerance, neat winding and print settings the listing actually states. The spools below are all light blue PLA or PLA+ on standard spools, and each listing states the diameter, tolerance, spool size and settings where given, and marks what it does not state.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall SUNLU PLA Sky Blue: Highest HQ Score here: nozzle 200-230 C, bed 50-65 C and speed 50-100 mm/s stated Check price on Amazon
  • Best PLA+ eSUN PLA+ Light Blue: Enhanced strength and toughness with 340-350 m on the spool Check price on Amazon
  • Best Matte ELEGOO Matte Ice Blue: Matte, low-gloss finish with nearly invisible layer lines Check price on Amazon
  • Best Glossy Finish ELEGOO PLA Light Blue: Glossy surface finish with low warp and shrinkage stated Check price on Amazon

Machines on the list

SUNLU PLA 3D Printer Filament, Sky Blue, 1KG

SUNLU PLA 3D Printer Filament, Sky Blue, 1KG

SUNLU9.7/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Sky blue PLA filament on a 1 kg spool, 1.75 mm diameter with +/-0.02 mm accuracy and stated nozzle and bed temperatures.

Pros

  • Nozzle and bed temperatures stated: 200-230 C and 50-65 C
  • Print speed of 50-100 mm/s stated
  • Spool dimensions stated: 195 mm diameter, 59 mm width, 63 mm hub hole
  • Vacuum packaging stated to keep the filament moisture-free

Cons

  • No warranty term is stated
  • No safety certification is stated
  • Listed as sky blue, not light blue
  • No filament length is stated
eSUN PLA+ Filament 3D Printer Filament PLA

eSUN PLA+ Filament 3D Printer Filament PLA

eSUN9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Light blue PLA+ filament on a 1 kg spool, 1.75 mm diameter with +/-0.03 mm accuracy and a stated length of 340-350 m.

Pros

  • Higher strength and better toughness than standard PLA, per the listing
  • Total length of 340-350 m stated
  • High-speed printing stated for Bambu Lab, K1 and AnkerMake printers
  • Plant-based starch raw materials stated

Cons

  • Tolerance of +/-0.03 mm is looser than the +/-0.02 mm of the other picks
  • No nozzle or bed temperature is stated
  • No warranty term is stated
  • No safety certification is stated
ELEGOO Matte PLA Filament Ice Blue 1KG

ELEGOO Matte PLA Filament Ice Blue 1KG

ELEGOO9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Ice blue matte PLA filament on a 1 kg spool, 1.75 mm diameter with +/-0.02 mm accuracy and a low-gloss matte finish.

Pros

  • Matte, low-gloss finish with nearly invisible layer lines, per the listing
  • +/-0.02 mm accuracy stated
  • Neatly wound to prevent tangles and feeding issues
  • Vacuum sealed packaging stated

Cons

  • Listed as ice blue, not light blue
  • No nozzle or bed temperature is stated
  • No warranty term is stated
  • Enclosed printers need the door open, per the listing
ELEGOO PLA 3D Printer Filament 1.75mm Light Blue

ELEGOO PLA 3D Printer Filament 1.75mm Light Blue

ELEGOO9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Light blue PLA filament on a 1 kg cardboard spool, 1.75 mm diameter with +/-0.02 mm accuracy and a glossy surface finish.

Pros

  • Glossy surface finish stated
  • +/-0.02 mm accuracy stated
  • Low warp and shrinkage stated, with no odor during printing
  • Dried before packaging and vacuum sealed, per the listing

Cons

  • No nozzle or bed temperature is stated
  • No print speed is stated
  • No warranty term is stated
  • No filament length is stated

Other machines to compare

Specs compared

Model HQ Score Type Diameter Tolerance Spool Nozzle temp Warranty
SUNLU PLA Sky Blue 9.7/10 PLA 1.75 mm +/-0.02 mm 1 kg 200-230 C Not stated
eSUN PLA+ Light Blue 9.6/10 PLA+ 1.75 mm +/-0.03 mm 1 kg Not stated Not stated
ELEGOO Matte Ice Blue 9.6/10 Matte PLA 1.75 mm +/-0.02 mm 1 kg Not stated Not stated
ELEGOO PLA Light Blue 9.5/10 PLA 1.75 mm +/-0.02 mm 1 kg Not stated Not stated

These numbers come straight from each maker’s listing and are rated, not measured by us (11 November 2026).

What the listings tell you, and what they leave out

All 4 spools are 1 kg of 1.75 mm filament, and all 4 state a diameter tolerance: +/-0.02 mm on the SUNLU and both ELEGOO spools, and +/-0.03 mm on the eSUN PLA+. Only 1 of the 4 listings states nozzle and bed temperatures, and only 1 states a print speed: the SUNLU listing, with a nozzle temperature of 200-230 C, a bed temperature of 50-65 C and a speed of 50-100 mm/s. None of the 4 listings states a warranty term.

The ELEGOO PLA and ELEGOO Matte listings name a finish: glossy on the ELEGOO PLA and matte on the ELEGOO Matte PLA. Only the eSUN listing states a filament length, 340-350 m, and only the eSUN listing names high-speed printing. Treat the 100% neat winding rate and the 99% printer compatibility in the SUNLU listing as maker claims: no method is stated for either figure.

Buying guide: choosing the best light blue 3d printer filament

PLA vs PLA+

3 of the spools here are standard PLA and 1 is PLA+: the eSUN PLA+ listing describes an enhanced version of standard PLA with higher strength and better toughness, low shrinkage and no deformation or cracking. PLA+ suits functional parts that take more stress, while standard PLA suits display pieces and everyday prints. All 4 spools are 1.75 mm, so the choice is about strength, not size.

Nozzle and bed temperatures

Only the SUNLU listing states print temperatures: a nozzle temperature of 200-230 C and a bed temperature of 50-65 C, with a print speed of 50-100 mm/s. The other 3 listings state no temperatures, so start from the printer’s PLA profile and adjust from there. A spool with no stated settings is not a bad spool, but it leaves the next print to guesswork.

Diameter tolerance and winding

Tolerance decides how evenly the filament feeds: the SUNLU and both ELEGOO spools state +/-0.02 mm, and the eSUN PLA+ states +/-0.03 mm. All 4 listings describe neat or full mechanical winding to prevent tangles, and the SUNLU listing claims a 100% neat rate. A spool that tangles mid-print wastes the print, so winding matters as much as tolerance.

Matte vs glossy finish

Finish changes the look of a print: the ELEGOO PLA listing states a glossy surface finish, and the ELEGOO Matte PLA listing states a matte, low-gloss finish with nearly invisible layer lines. The SUNLU and eSUN listings state no finish. For display pieces where layer lines show, the matte spool hides them best; for bright, shiny parts, the glossy spool fits.

Spool size and storage

All 4 spools hold 1 kg of filament, and the SUNLU spool measures 195 mm across, 59 mm wide with a 63 mm hub hole. The SUNLU and both ELEGOO listings state vacuum sealed packaging to keep the filament dry, and the eSUN listing states no packaging. Store opened spools dry: see how to dry filament for methods and tools.

Project Match

  • Bright display prints: ELEGOO PLA Light Blue, with a glossy surface finish stated.
  • Matte display pieces: ELEGOO Matte Ice Blue, with a matte, low-gloss finish and nearly invisible layer lines.
  • Functional parts: eSUN PLA+ Light Blue, with higher strength and better toughness stated.
  • Prints with stated settings: SUNLU PLA Sky Blue, with nozzle 200-230 C, bed 50-65 C and speed 50-100 mm/s stated.

How the scores add up

Each spool is scored on performance, build, value, safety and warranty. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SUNLU PLA Sky Blue 9.7 32 22 21 n/a 0
eSUN PLA+ Light Blue 9.6 29 21 20 n/a 0
ELEGOO Matte Ice Blue 9.6 28 21 20 n/a 0
ELEGOO PLA Light Blue 9.5 27 20 19 n/a 0

Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. Safety is scored for powered machines and any listing that states safety features; accessories without either are scored over the remaining 90 points.

FAQ: lasers and CNC

Can I use 3D printer filament in a 3D pen?

None of the 4 listings states 3D pen use: all 4 describe 1.75 mm filament for FDM 3D printers. A 3D pen that takes 1.75 mm filament may accept it, but the listings do not state it, so check the pen’s own requirements before loading a spool.

What nozzle temperature does light blue PLA need?

The SUNLU listing recommends a nozzle temperature of 200-230 C and a bed temperature of 50-65 C. The other 3 listings state no temperatures, so use the printer’s PLA profile for those spools.

What is the difference between PLA and PLA+?

PLA+ is an enhanced version of standard PLA: the eSUN listing states higher strength, better toughness, low shrinkage and no deformation or cracking. Standard PLA suits display pieces and everyday prints, while PLA+ suits functional parts that take more stress.

How much filament is on a spool?

All 4 spools hold 1 kg of filament, listed as 2.2 lbs on the ELEGOO and eSUN listings. The eSUN listing also states a total length of 340-350 m; the other 3 listings state no length.

Related: the 3D printers hub, best 3D PLA filament, best wood PLA filament, best ABS filament for 3D printing, how to dry filament, 3D printer nozzle size, best 3D printer bed adhesive, best heat resistant 3D printer filament, best filament for Christmas ornaments and 3D printer types.

More buying guides

3D Printers ·

Best Blue Abs Filament (2026)

Five blue ABS spools for FDM printers, compared by heat resistance, impact strength, print settings and warranty terms.

3D Printer Accessories ·

Best Spray Paint for Hard Plastic (2026)

Four spray paints for hard plastic, from a plastic-specific trim restorer to a textured automotive topcoat, compared by coverage, dry time and finish.