3D Printer Types: FDM, Resin and SLA Explained
FDM melts filament layer by layer while resin and SLA harden liquid resin with light, and the FDM printers below show what to check.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Bambu Lab P1S 3D Printer9.7/10View on Amazon - 2
Bambu Lab A1 mini 3D Printer + LED Lamp Kit9.7/10View on Amazon - 3
FLASHFORGE AD5X Multi-Material 3D Printer 4-Color9.6/10View on Amazon - 4
Flashforge Adventurer 5M 3D Printer for Beginners9.6/10View on Amazon
3d printer types come down to a small set of families: FDM, resin and SLA. FDM covers functional parts, prototypes and multi-color prints in this guide, while resin and SLA are the liquid-resin types. This guide explains each type in plain terms, then compares the FDM printers listed below by speed, materials and calibration.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Bambu Lab P1S 3D Printer
Enclosed CoreXY FDM printer with 500mm/s speed, automatic bed leveling, and a 15 Minutes setup claim.
Pros
- 500mm/s speed with 20000 mm/s² acceleration
- Fully enclosed body for advanced filaments
- Automatic bed leveling and a 15 Minutes setup claim
- Up to 16 colors with AMS for multi-color projects
Cons
- Multi-color printing requires AMS, and this size is sold without AMS
- Build volume is not stated in the listing
- Carbon and glass fiber reinforced polymer is not recommended by the listing
- Weight and dimensions describe the machine, not the build volume

Bambu Lab A1 mini 3D Printer + LED Lamp Kit
Compact beginner FDM printer with full-auto calibration, active flow rate compensation, and an included LED Lamp Kit.
Pros
- Full-auto calibration with active flow rate compensation
- LED Lamp Kit included for printed lamp projects
- MakerWorld model library and Bambu Handy app control
- Quiet running at ≤48 dB per the listing
Cons
- Print speed is not stated in the listing
- Build volume is not stated in the listing
- Filament types are not stated in the listing
- Lamp projects need compatible lamp models from the library

FLASHFORGE AD5X Multi-Material 3D Printer 4-Color
4-color multi-material FDM printer with 600mm/s speed, full-auto calibration and filament backup.
Pros
- 4-color printing with the Intelligent Filament System, per the listing
- Rated speed up to 600mm/s with acceleration up to 20000mm/s²
- Full-auto calibration and filament backup, per the listing
- CoreXY frame with vibration compensation, per the listing
Cons
- No build volume is stated on the listing
- No nozzle size is stated on the listing
- No enclosure is stated on the listing
- No heated bed or nozzle temperature is stated on the listing

Flashforge Adventurer 5M 3D Printer for Beginners
Beginner FDM printer with 600mm/s speed, direct drive to 280°C, auto-leveling and an 8.7 in PEI build plate.
Pros
- 600mm/s speed with 20,000mm/s² acceleration, per the listing
- Auto bed leveling with 25-point detection and 0.01mm precision calibration
- Direct drive to 280°C with a 32mm³/s high-flow nozzle
- MagSwitch PEI plate with removal in 3s and nozzle swap in under 15s
Cons
- Enclosure is optional, not included
- Warranty excludes the extruder and build plate sheet
- No multi-color printing is stated on the listing
- Print time reduction of 40-60% applies to PLA, PETG and ASA only, per the listing
3d printer types: FDM, resin and SLA
Each type builds a part layer by layer, and the difference is what the layers are made from. FDM melts filament and lays it down through a heated nozzle. Resin printers harden liquid resin with light. SLA printers harden liquid resin with a laser. The table below shows the types and which of the listed picks belongs to each.
| Type | How it builds | Listed pick |
|---|---|---|
| FDM | Melts filament and lays it down through a heated nozzle | AD5X, Adventurer 5M, P1S, A1 mini |
| Resin | Hardens liquid resin with light | Not stated |
| SLA | Hardens liquid resin with a laser | Not stated |
Every pick in this guide is an FDM printer, so the resin and SLA rows have no listed pick. For filament choice, see our 3D printer filament types guide.
FDM printers: filament, layer by layer
FDM is the type in this guide. The FLASHFORGE AD5X prints (on Amazon) in 4 colors through its Intelligent Filament System, with 4 spools arranged side by side, and the listing rates it at up to 600mm/s with acceleration up to 20000mm/s². The Adventurer 5M is rated at the same 600mm/s speed, with a 32mm³/s high-flow nozzle and a 50W ceramic heater reaching 200°C in 35s. Each lists full-auto calibration: the AD5X lists full-auto calibration with filament backup, and the 5M lists auto bed leveling with 25-point detection and 0.01mm precision calibration.
Materials are where the FLASHFORGE picks differ. The AD5X lists PLA, TPU, PETG, SILK, PLA-CF and PETG-CF, while the 5M listing points to PLA, PETG and ASA for its print time claim. The 5M also lists 0.25-0.8mm nozzles, a MagSwitch PEI plate with removal in 3s, and a nozzle swap in under 15s. The Bambu Lab picks are listed as ready-to-use FDM printers with a beginner-friendly ecosystem and the MakerWorld model library, and the P1S adds an enclosed CoreXY frame.
Resin and SLA printers
Resin printers and SLA printers each work with liquid resin instead of filament, and each hardens it with light. SLA uses a laser to harden the resin. This guide lists no resin printer and no SLA printer, so no resin build volume, layer figure or wash and hardening step is stated here. A maker who wants a resin printer should compare resin listings on their own terms, with the same checks used below: stated speed, stated materials and stated calibration.
How to pick a type
Match the type to the project. For functional parts and prototypes, FDM covers the work: the 5M listing is aimed at rapid prototyping and batch production, and it claims a print time reduction of 40-60% for PLA, PETG and ASA. For multi-color prints, the AD5X is the pick here, with 4-color printing through its Intelligent Filament System. For a starter printer, the A1 mini is listed as ready-to-use for beginners with full-auto calibration, and the P1S is listed as a beginner-friendly enclosed CoreXY printer.
Check the running costs before you buy: see our 3D printer price guide for what to expect, and our low cost 3D printer guide for budget picks. For a starter machine, see our beginner printer guide.
3D printer gear for the guide
Each pick below handles a part of the job: the AD5X covers multi-color FDM printing, the Adventurer 5M covers fast prototyping, and the P1S and A1 mini cover ready-to-use FDM printing for beginners.
FAQ: lasers and CNC
What is an FDM 3D printer?
An FDM printer melts filament and lays it down through a heated nozzle, layer by layer. Each pick in this guide is an FDM printer, including the AD5X with 4-color printing and the Adventurer 5M with a 32mm³/s high-flow nozzle.
What is the difference between resin and SLA?
Each hardens liquid resin with light, layer by layer, and SLA uses a laser to harden the resin. This guide lists no resin printer and no SLA printer, so no resin figures are stated here.
How fast do these FDM printers print?
Each FLASHFORGE pick is rated at up to 600mm/s, with acceleration up to 20000mm/s² on the AD5X and 20,000mm/s² on the Adventurer 5M. No speed figure is stated for the P1S or the A1 mini.
What materials can these printers use?
The AD5X lists PLA, TPU, PETG, SILK, PLA-CF and PETG-CF. The Adventurer 5M listing points to PLA, PETG and ASA for its print time claim. No material list is stated for the P1S or the A1 mini.
Which 3D printer is best for a beginner?
The A1 mini is listed as ready-to-use for beginners with full-auto calibration, and the P1S is listed as a beginner-friendly enclosed CoreXY printer. The Adventurer 5M is also listed for beginners, with auto bed leveling and a MagSwitch PEI plate.
Do these printers need an enclosure?
The P1S is listed as an enclosed CoreXY printer. The Adventurer 5M lists an optional enclosure as a cost-effective upgrade. No enclosure is stated for the AD5X or the A1 mini.
Related: the 3D printer hub, 3D printer filament types and 3D printer price.




