Best Dark Blue Pla Filament (2026)
Dark blue PLA filaments in 1KG spools, compared by diameter, accuracy, print speed and finish.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSUNLU PLA+ 2.09.7/10View on Amazon - 2
Best PLA+eSUN PLA+ Filament9.6/10View on Amazon - 3
Best Standard PLAELEGOO PLA Filament9.6/10View on Amazon - 4
Best Matte FinishELEGOO Matte PLA9.5/10View on Amazon
A deep blue print sells the project before anyone reads the label: a navy sign, a dark blue bracket, a Klein Blue vase on the shelf. This guide compares the best dark blue pla filament by diameter, accuracy, print speed and spool length, so the spool you buy matches the printer you run.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall SUNLU PLA+ 2.0: 300mm/s fast printing, 1.75mm, +/-0.02mm accuracy Check price on Amazon
- Best PLA+ eSUN PLA+ Filament: Higher strength and toughness, 340-350m per spool Check price on Amazon
- Best Standard PLA ELEGOO PLA Filament: Glossy dark blue, +/-0.02mm accuracy, 1KG spool Check price on Amazon
- Best Matte Finish ELEGOO Matte PLA: Low gloss matte navy blue, nearly invisible layer lines Check price on Amazon
Machines on the list

SUNLU PLA+2.0 3D Printer Filament, Klein Blue
A 1KG spool of Klein Blue PLA+ 2.0 with 1.75mm diameter, +/-0.02mm accuracy and printing speeds of up to 300mm/s.
Pros
- Printing speeds of up to 300mm/s
- Dimensional accuracy of +/-0.02mm
- Neatly wound, with no tangling or clogging stated
- Reusable spool with vacuum packaging
Cons
- No filament length in metres is stated
- One color stated, Klein Blue
- Recommended print speed of 100-300mm/s needs a printer that runs fast
- Warranty term is 30-Day

eSUN PLA+ Filament 1.75mm
A 1KG spool of dark blue PLA+ with 1.75mm diameter, +/-0.03mm accuracy and a stated length of 340-350m.
Pros
- Higher strength and better toughness than ordinary PLA
- Stated length of 340-350m per spool
- High-speed printing for Bambu Lab, Creality and AnkerMake printers
- Wide compatibility with most FDM 3D printers
Cons
- No warranty term is stated
- Dimensional accuracy of +/-0.03mm, against +/-0.02mm on the SUNLU and ELEGOO PLA
- No print speed in mm/s is stated
- No nozzle or bed temperature is stated

ELEGOO PLA 3D Printer Filament 1.75mm Dark Blue
A 1KG spool of dark blue PLA with 1.75mm diameter, +/-0.02mm accuracy and a glossy surface.
Pros
- Dimensional accuracy of +/-0.02mm
- Glossy surface with strong layer adhesion
- Low warp and shrinkage, with a lower melting temperature
- Neatly wound to prevent tangles and feeding issues
Cons
- No warranty term is stated
- No print speed in mm/s is stated
- No nozzle or bed temperature is stated
- No filament length in metres is stated

ELEGOO Matte PLA 3D Printer Filament 1.75mm Navy
A 1KG spool of navy blue matte PLA with 1.75mm diameter, low gloss and nearly invisible layer lines.
Pros
- Matte appearance with low gloss and a smooth texture
- Nearly invisible layer lines
- Neatly wound to prevent tangling and feeding interruptions
- Dried and vacuum-sealed before packaging
Cons
- No warranty term is stated
- No dimensional accuracy figure is stated
- No print speed in mm/s is stated
- No nozzle or bed temperature is stated
Other machines to compare
ELEGOO PLA Plus 3D Printer Filament 1.75mm Dark Blue 1KGCheck price on Amazon
ELEGOO Matte PLA 3D Printer Filament Navy Blue 1KG 1.75mmCheck price on Amazon
MarsWork PLA BasicCheck price on Amazon
ELEGOO Matte PLA 3D Printer Filament 1.75mm Navy Blue 1kgCheck price on Amazon
eSUN PLA+ Filament 1.75mm 1KGCheck price on Amazon
DEEPLEE Matte PLA Filament 1.75mm 1kg Navy BlueCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Accuracy | Print speed | Spool | Warranty |
|---|---|---|---|---|---|---|
| SUNLU PLA+ 2.0 | 9.7/10 | 1.75mm | +/-0.02mm | Up to 300mm/s | 1KG | 30-Day |
| eSUN PLA+ Filament | 9.6/10 | 1.75mm | +/-0.03mm | High speed | 1KG | Not stated |
| ELEGOO PLA Filament | 9.6/10 | 1.75mm | +/-0.02mm | Not stated | 1KG | Not stated |
| ELEGOO Matte PLA | 9.5/10 | 1.75mm | Not stated | Not stated | 1KG | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 4 November 2026. All 4 spools are 1KG of 1.75mm filament.
What the listings tell you, and what they leave out
We read 4 dark blue PLA listings for this guide. Only 1 states a warranty term, the SUNLU at 30-Day, and only 1 states a spool length, the eSUN at 340-350m. Only 1 states a print speed figure, the SUNLU at up to 300mm/s, and only 1 states a nozzle temperature, the SUNLU at 205-220°C with a bed temperature of 50-60°C. 2 state an accuracy of +/-0.02mm, 1 states +/-0.03mm, and 1 states no accuracy figure at all. The SUNLU is the only spool with stated spool dimensions: a diameter of 195mm, a width of 57mm and a hub hole diameter of 63mm.
Buying guide: choosing the best dark blue pla filament
PLA vs PLA+
The SUNLU and the eSUN are PLA+, and the ELEGOO PLA and the ELEGOO Matte are standard PLA. PLA+ is an enhanced version of ordinary PLA, per the eSUN listing, with higher strength and better toughness, and the SUNLU listing states its PLA+ 2.0 is more resistant to brittleness and cracking. If you print functional parts, PLA+ is the stronger choice; for decorative items, standard PLA prints fine.
Diameter and accuracy
All 4 spools are 1.75mm filament for FDM printers. The SUNLU and ELEGOO PLA state an accuracy of +/-0.02mm, the eSUN states +/-0.03mm, and the ELEGOO Matte states no accuracy figure. The SUNLU lists spool dimensions of 195mm diameter, 57mm width and a 63mm hub hole. A tighter accuracy figure means more consistent feeding, so check the figure before you buy.
Print speed and temperature
Only the SUNLU states a print speed figure: printing speeds of up to 300mm/s, with a recommended print speed of 100-300mm/s, a nozzle temperature of 205-220°C and a bed temperature of 50-60°C. The SUNLU also states a reusable spool that reduces waste, and airtight vacuum packaging to keep the filament moisture-free. The eSUN states high-speed printing with no figure, and the 2 ELEGOO spools state no speed or temperature at all. If you run a fast printer, the SUNLU gives you the numbers to set it up.
Matte vs glossy finish
Finish changes how a print looks. The ELEGOO PLA has a glossy surface, and the ELEGOO Matte PLA has a matte appearance with low gloss and nearly invisible layer lines. The SUNLU and eSUN state no finish. For display pieces, the matte navy blue hides layer lines; for a bright blue, the glossy dark blue shows more shine.
Project Match
- High-precision models: SUNLU PLA+ 2.0, with +/-0.02mm accuracy and printing speeds of up to 300mm/s.
- Functional parts: eSUN PLA+, with higher strength and better toughness than ordinary PLA.
- Decorative items: ELEGOO Matte PLA, with a matte navy blue finish and nearly invisible layer lines.
- Everyday prints: ELEGOO PLA, with a glossy dark blue finish and strong layer adhesion.
- Fast printing: SUNLU PLA+ 2.0, with a recommended print speed of 100-300mm/s.
How the scores add up
Each filament is scored on performance, build, value, safety and warranty, using only what the listing publishes. How we pick explains the weights.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| SUNLU PLA+ 2.0 | 9.7 | 32 | 22 | 21 | n/a | 1 |
| eSUN PLA+ Filament | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ELEGOO PLA Filament | 9.6 | 28 | 20 | 20 | n/a | 0 |
| ELEGOO Matte PLA | 9.5 | 27 | 20 | 20 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What temperature do you print dark blue PLA filament at?
Only the SUNLU states temperatures: a nozzle temperature of 205-220°C and a bed temperature of 50-60°C. The other 3 state no nozzle or bed temperature, so check the maker’s settings for your printer.
How much filament comes on a 1KG spool?
Only the eSUN states a length: 340-350m on a 1KG spool. The other 3 state 1KG with no length in metres, so the spool length is not stated for them.
Is navy blue PLA the same as dark blue PLA?
The listings name Klein Blue, dark blue and navy blue. The ELEGOO Matte is navy blue, the SUNLU is Klein Blue, and the ELEGOO PLA and eSUN are dark blue. Check the color name in the listing before you buy.
Can I print PLA+ on any FDM printer?
All 4 state compatibility with most 1.75mm FDM printers. The SUNLU states compatibility with nearly all 1.75mm FDM 3D printers, and the eSUN lists Bambu Lab, Creality, AnkerMake, Voron, Prusa, UltiMaker, Ender 3, MakerBot, Flashforge and Raise3D.
Does dark blue PLA filament come with a warranty?
Only the SUNLU states one: 30-Day. The other 3 state no warranty term.
More laser and CNC guides
See the 3D printer hub and the FDM 3D printers guides. Also see our best PLA filament for 3D printers. Also see our best PLA filament 1 kg. Also see our best value PLA filament. Also see our best basic PLA filament with spool. Also see our best PLA filament for Creality K1c. Also see our 3D printer resin vs filament cost.




