Best Blue Abs Filament (2026)
Five blue ABS spools for FDM printers, compared by heat resistance, impact strength, print settings and warranty terms.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallPolymaker ABS Pro9.6/10View on Amazon - 2
Best for Tough PartsELEGOO ABS Blue9.6/10View on Amazon - 3
Best Print SettingsSUNLU ABS Klein Blue9.6/10View on Amazon - 4
Best WarrantyCreality CR-ABS Blue9.4/10View on Amazon - 5
Best for Warp ResistanceANYCUBIC ABS Navy Blue9.4/10View on Amazon
A functional print has to survive real use: brackets that hold their shape near heat, cases that take a knock, parts that stay flat instead of curling off the bed. Shoppers looking for ABS filament blue will find the best blue ABS filament spools compared here on stated heat resistance, impact strength, print settings and warranty terms, so the choice comes down to what each listing actually publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall Polymaker ABS Pro: Engineering-grade ABS Pro with heat resistance, print speeds up to 250 mm/s and improved creep resistance for functional parts. Check price on Amazon
- Best for Tough Parts ELEGOO ABS Blue: Impact resistance and heat resistance up to 85 °C, vacuum sealed, for drone mounts, protective cases and industrial tools. Check price on Amazon
- Best Print Settings SUNLU ABS Klein Blue: Full recommended print parameters with a nozzle range of 250 to 260°C and a diameter tolerance of ±0.02 mm. Check price on Amazon
- Best Warranty Creality CR-ABS Blue: The only pick with a stated 1 year warranty and 12-month after-sales service. Check price on Amazon
- Best for Warp Resistance ANYCUBIC ABS Navy Blue: A 220 mm x 220 mm anti-warping print area with a heated bed at 100°C and heat resistance up to 85 °C. Check price on Amazon
Machines on the list

Polymaker ABS Pro Filament Blue 1KG 1.75mm
An engineering-grade blue ABS Pro spool for enclosed high-temperature printing, with print speeds up to 250 mm/s.
Pros
- Engineering-grade heat resistance for printer parts, brackets, housings and fixtures
- Print speeds up to 250 mm/s with strong mechanical properties
- Improved creep resistance and dimensional stability under continuous load
- Build plate preheat guidance at 100 to 110°C for 10 minutes in the listing
Cons
- No warranty term in the listing
- No nozzle temperature in the listing
- No diameter tolerance figure in the listing
- Needs an enclosed printer for the stated print window

ELEGOO ABS 3D Printer Filament 1.75mm Blue 1KG
A blue ABS spool with heat resistance up to 85 °C, vacuum sealed packing and a stated need for an enclosed printer.
Pros
- Heat resistance up to 85 °C and water resistance for functional parts
- Impact resistance and toughness for drone mounts, protective cases and industrial tools
- 1.75 mm high-precision diameter with full mechanical winding and manual inspection
- Vacuum sealed packing to prevent moisture before printing
Cons
- No warranty term in the listing
- Requires an enclosed printer for better results
- No nozzle or bed temperature range in the listing
- No print speed figure in the listing

SUNLU ABS Filament 1.75mm,Klein Blue,1kg
A Klein Blue ABS spool with full recommended print parameters and a diameter tolerance of ±0.02 mm.
Pros
- Full recommended print parameters: nozzle 250 to 260°C, bed 80 to 100°C
- Diameter tolerance of ±0.02 mm with high precision manufacturing
- Print speed of 40 to 60 mm/s with 5 mm retraction distance
- Compatible with 99% of FDM 3D printers that take 1.75 mm filament
Cons
- No warranty term in the listing
- Recommends an enclosure during printing
- No heat resistance temperature in the listing
- No vacuum sealed packing is stated in the listing

Creality ABS Filament 1.75mm, Blue, 1-Pack (1 kg)
A blue CR-ABS spool with a stated 1 year warranty, a ±0.02 mm accuracy figure and 12-month after-sales service.
Pros
- A 1 year warranty with 12-month after-sales service in the listing
- Accuracy of ±0.02 mm with good dimensional stability
- Improved warping, splitting and layer separation on large prints
- Odorless and non-toxic printing with no harmful substances emission
Cons
- No nozzle or bed temperature range in the listing
- No print speed figure in the listing
- No heat resistance temperature in the listing

ANYCUBIC ABS Filament 1.75mm, 1KG Spool (2.2 lbs)
A Navy Blue ABS spool with heat resistance up to 85 °C and a 220 mm x 220 mm anti-warping print area.
Pros
- Heat resistance up to 85 °C for high heat scenarios
- A 220 mm x 220 mm anti-warping print area with a heated bed at 100°C
- Superior impact resistance for automobile components and electronic appliance chassis
- Intelligent recognition with ACE Pro for printing information
Cons
- No warranty term in the listing
- No nozzle temperature range in the listing
- No print speed figure in the listing
- No diameter tolerance figure in the listing
Other machines to compare
ELEGOO ABS 3D Printer Filament 1.75mm Sky Blue 1KGCheck price on Amazon
Polymaker ABS Filament Blue 1KG 1.75mmCheck price on Amazon
Polymaker ABS Filament Light Blue 1KG 1.75mmCheck price on Amazon
SUNLU High Speed ABS FilamentCheck price on Amazon
Bambu Lab ABS Filament Navy Blue 1kg RefillCheck price on Amazon
Specs compared
| Model | HQ Score | Diameter | Spool | Heat resistance | Print speed | Enclosure | Warranty |
|---|---|---|---|---|---|---|---|
| Polymaker ABS Pro | 9.6/10 | 1.75 mm | 1 kg | Engineering-grade | Up to 250 mm/s | Enclosed | Not stated |
| ELEGOO ABS Blue | 9.6/10 | 1.75 mm | 1 kg (2.2 lb) | Up to 85 °C | Not stated | Enclosed required | Not stated |
| SUNLU ABS Klein Blue | 9.6/10 | 1.75 mm | 1 kg | Not stated | 40 to 60 mm/s | Enclosure recommended | Not stated |
| Creality CR-ABS Blue | 9.4/10 | 1.75 mm | 1 kg (2.2 lb) | Not stated | Not stated | Not stated | 1 year |
| ANYCUBIC ABS Navy Blue | 9.4/10 | 1.75 mm | 1 kg (2.2 lb) | Up to 85 °C | Not stated | Not stated | Not stated |
We give each product’s specs as its manufacturer rates them; listings read 11 November 2026. Heat resistance is shown only where the listing states a temperature.
How the picks were scored
Each spool is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Polymaker ABS Pro | 9.6 | 32 | 21 | 21 | 4 | 0 |
| ELEGOO ABS Blue | 9.6 | 29 | 21 | 20 | 5 | 0 |
| SUNLU ABS Klein Blue | 9.6 | 29 | 21 | 21 | 4 | 0 |
| Creality CR-ABS Blue | 9.4 | 26 | 19 | 18 | 4 | 2 |
| ANYCUBIC ABS Navy Blue | 9.4 | 29 | 19 | 19 | 4 | 0 |
Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.
What the listings tell you, and what they leave out
Five blue ABS listings were read for this guide. One states a warranty term: the Creality spool, with a 1 year warranty in its spec table. Three ask for an enclosed printer or recommend an enclosure: ELEGOO, Polymaker and SUNLU. Two state a heat resistance temperature of up to 85 °C: ELEGOO and ANYCUBIC. Only SUNLU publishes a full set of recommended print parameters, and only Polymaker publishes a print speed figure, up to 250 mm/s. The Creality spec table model reads PETG while the title says ABS.
The gaps matter as much as the claims. No listing here states a nozzle temperature except SUNLU, and no listing states a diameter tolerance except SUNLU and Creality. Compare the stated figures, not the adjectives, and check the enclosure line before ordering a spool for an open printer.
Buying guide: choosing the best blue ABS filament
Heat resistance and impact strength
ELEGOO and ANYCUBIC state heat resistance up to 85 °C, while Polymaker states engineering-grade heat resistance without a temperature. ELEGOO names drone mounts, protective cases, rugged outdoor gear and industrial tools for its impact resistance, and ANYCUBIC names automobile components and chassis for electronic appliances. Match the stated use to the part: a bracket near heat wants a stated temperature, while a case that takes knocks wants stated impact resistance.
Print settings: nozzle, bed and speed
Only SUNLU publishes a full set of recommended print parameters: a nozzle temperature of 250 to 260°C, a print platform temperature of 80 to 100°C, a printing speed of 40 to 60 mm/s, a retraction distance of 5 mm and a retraction speed of 50 mm/s. Polymaker publishes a print speed of up to 250 mm/s and a build plate preheat of 100 to 110°C for 10 minutes. ANYCUBIC publishes a heated bed at 100°C for its anti-warping print area.
Enclosed printers and warping
ELEGOO states that an enclosed printer is required for better results, Polymaker designs its spool for enclosed and passively heated printers, and SUNLU recommends an enclosure during printing. ANYCUBIC states a 220 mm x 220 mm anti-warping print area with a heated bed at 100°C, and Polymaker suggests a bed adhesive or glue if adhesion issues persist. Keep the printer away from drafts and let the part cool in the enclosure before opening it.
Diameter, tolerance and spool size
Every spool here is 1.75 mm filament on a 1 kg spool, and two state a diameter tolerance of ±0.02 mm: SUNLU and Creality. SUNLU states a larger inner diameter on the spool that makes unwinding easier, and ELEGOO states full mechanical winding with manual inspection to reduce tangles. Check the spool size against the prints planned before ordering.
ABS printing calls for an enclosed printer on three of the listings here, and the Creality listing advises storing the spool in a dry and ventilated place, away from high temperature, sunny or humid conditions. Print in a ventilated space, follow the enclosure line on the listing, and never laser ABS filament or printed ABS parts.
Project Match
- Functional brackets and housings: Polymaker ABS Pro, for printer parts, brackets, housings, fixtures and prototypes.
- Rugged outdoor gear and protective cases: ELEGOO ABS Blue, for drone mounts, protective cases, rugged outdoor gear and industrial tools.
- Flat parts that must resist warping: ANYCUBIC ABS Navy Blue, with a 220 mm x 220 mm anti-warping print area.
- Prints with stated settings to start from: SUNLU ABS Klein Blue, with full recommended print parameters.
- Prints where a stated warranty matters: Creality CR-ABS Blue, with a 1 year warranty.
FAQ: lasers and CNC
Do I need an enclosed printer for ABS filament?
Three of the listings here say so: ELEGOO states that an enclosed printer is required for better results, Polymaker designs its spool for enclosed and passively heated printers, and SUNLU recommends an enclosure during printing. ANYCUBIC and Creality do not state an enclosure need.
What nozzle temperature does ABS filament need?
Only SUNLU publishes a nozzle temperature here: 250 to 260°C. The other listings give no nozzle temperature, so check the listing for the spool being bought before setting a temperature.
How do I stop ABS prints from warping?
ANYCUBIC states a 220 mm x 220 mm anti-warping print area with a heated bed at 100°C, and Polymaker suggests preheating the build plate to 100 to 110°C for 10 minutes and applying a bed adhesive or glue if adhesion issues persist.
What is blue ABS filament good for?
Functional parts that need heat resistance and impact strength: ELEGOO names drone mounts, protective cases, rugged outdoor gear and industrial tools, while Polymaker names printer parts, brackets, housings, fixtures and prototypes. ANYCUBIC names automobile components and chassis for electronic appliances.
How should I store ABS filament?
ELEGOO ships each spool vacuum sealed to prevent moisture, and Creality advises storing the spool in a dry and ventilated place, away from high temperature, sunny or humid conditions. ELEGOO also recommends drying the filament out before use.
Related: the 3D printers hub, red ABS filament picks, the ABS filament 1.75 mm guide, and the light blue 3D printer filament picks. Also see the heat resistant 3D printer filament guide, how to dry filament, bed adhesive for first-layer grip, and ABS wood filament picks for wood-look prints.




