Best 3D PLA Filament (2026): 5 Picks for Makers
Five PLA filaments from 0.2 kg spools to 1 kg spools, compared on accuracy, spool size, color range and the print settings each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallUJOYBIO Elite PLA+9.7/10View on Amazon - 2
Best PLA+eSUN PLA+ Pine Green9.6/10View on Amazon - 3
Best Black SpoolELEGOO PLA Black9.6/10View on Amazon - 4
Best Multicolor SilkAMOLEN Silk Rainbow9.6/10View on Amazon
A print turns out well or badly on the spool you feed it. The right PLA lays down smooth layers, holds its shape and comes off the bed clean, while a damp or uneven spool strings, clogs and warps. This guide compares the best 3d pla filament picks on what each listing states: accuracy, spool size, color range and the print settings each maker publishes.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall UJOYBIO Elite PLA+: 20 colors, 4 kg in total, +/- 0.03 mm accuracy, and full nozzle, bed and speed settings stated. Check price on Amazon
- Best PLA+ eSUN PLA+ Pine Green: PLA+ strength and toughness, 1 kg on a cardboard spool, dried 24 hours and vacuum sealed with a desiccant bag. Check price on Amazon
- Best Black Spool ELEGOO PLA Black: Black 1 kg PLA at +/- 0.02 mm, dried before packaging and vacuum sealed, for most 1.75 mm FDM printers. Check price on Amazon
- Best Multicolor Silk AMOLEN Silk Rainbow: 4 silk rainbow spools, 200 g each, with fast color change and a glossy finish for arts and crafts. Check price on Amazon
Machines on the list

UJOYBIO 20 Color Bundle Elite PLA+ 3D Printer
A 20-color Elite PLA+ bundle, 4 kg in total across 0.2 kg spools, with stated nozzle, bed and speed settings for high-speed printing.
Pros
- 20 colors, 4 kg in total, 0.2 kg per spool
- 1.75 mm diameter at +/- 0.03 mm accuracy
- Nozzle 205-220°C, bed 55-65°C, speed 200-400 mm/s stated
- Each spool vacuum sealed; strong layer adhesion, low stringing
Cons
- No single 1 kg spool option stated
- No warranty term stated
- No spool material stated
- No drying time is stated

eSUN PLA+ Filament 1.75mm 1KG Pine Green ,3D
A 1 kg pine green PLA+ spool on cardboard, with higher strength and toughness than plain PLA and drying and vacuum sealing stated.
Pros
- PLA+ with higher strength and better toughness
- +/- 0.03 mm accuracy, 1.75 mm diameter
- Dried 24 hours, vacuum sealed with a desiccant bag
- Suits high-speed printers, per the listing
Cons
- One color only: pine green
- No nozzle or bed temperature stated
- No print speed stated
- No warranty term stated

ELEGOO PLA 3D Printer Filament 1.75mm Black 1KG
A black 1 kg PLA spool at 1.75 mm and +/- 0.02 mm accuracy, dried before packaging and vacuum sealed, for most FDM printers.
Pros
- +/- 0.02 mm accuracy at 1.75 mm
- Low warp and shrinkage, with strong layer adhesion
- Neatly wound to prevent tangles and feeding issues
- Dried before packaging and vacuum sealed against moisture
Cons
- One color only: black
- No nozzle or bed temperature stated
- No print speed stated
- No warranty term stated

AMOLEN Silk PLA 3D Printer Filament Bundle
A 4-spool silk rainbow PLA bundle, 200 g per spool, with fast color change and a glossy finish for arts, crafts and DIY prints.
Pros
- 4 silk rainbow spools, 200 g each, 800 g in total
- Fast color change in a single filament
- Silky texture with a smooth, glossy surface
- +/- 0.02 mm accuracy at 1.75 mm
Cons
- Warranty field reads 1, with no unit stated
- No nozzle or bed temperature stated
- No print speed stated

SUNLU PLA 3D Printer Filament, Black, 1KG
A single black 1kg PLA spool with stated nozzle and bed temperatures and a neatly wound 100% neat rate.
Pros
- 1.75mm diameter with +/- 0.02mm accuracy
- Stated nozzle range of 200-230°C and bed range of 50-65°C
- Neat winding with a 100% neat rate to reduce tangles and jams
- Spool dimensions stated at 8.00 inches diameter and 2.50 inches wide
Cons
- Black only, no color choice
- No vacuum-sealed packaging stated
- No warranty term is stated
- Single spool only, no bundle option
Other machines to compare
ELEGOO PLA 3D Printer Filament Bundle 4KGCheck price on Amazon
SUNLU PLA 3D Printer FilamentCheck price on Amazon
SUNLU Glow in The Dark PLA FilamentCheck price on Amazon
SUNLU High Speed Marble PLA FilamentCheck price on Amazon
SUNLU 250G PLA Filament 16 Color Bundle MulticolorCheck price on Amazon
Specs compared
| Model | HQ Score | Type | Spool | Diameter | Accuracy | Settings |
|---|---|---|---|---|---|---|
| UJOYBIO Elite PLA+ | 9.7/10 | PLA+, 20 colors | 4 kg, 20 x 0.2 kg | 1.75 mm | +/- 0.03 mm | 205-220°C nozzle, 55-65°C bed |
| eSUN PLA+ Pine Green | 9.6/10 | PLA+ | 1 kg | 1.75 mm | +/- 0.03 mm | Not stated |
| ELEGOO PLA Black | 9.6/10 | PLA | 1 kg | 1.75 mm | +/- 0.02 mm | Not stated |
| AMOLEN Silk Rainbow | 9.6/10 | Silk PLA, multicolor | 800 g, 4 x 200 g | 1.75 mm | +/- 0.02 mm | Not stated |
| SUNLU PLA Black | 9.6/10 | PLA | 1 kg | 1.75 mm | +/- 0.02 mm | Not stated |
Specs are what each manufacturer publishes as its rating on the listing, collected 10 November 2026.
What the listings tell you, and what they leave out
We read 5 PLA filament listings for this guide. All 5 state a 1.75 mm diameter and an accuracy figure: 3 at +/- 0.02 mm and 2 at +/- 0.03 mm. Only 1 states nozzle, bed and speed settings, and none states a warranty term with a unit. 2 listings state drying before packaging, and 3 state vacuum sealing.
2 listings also disagree with their own spec tables on weight or size: the ELEGOO spec table reads 2.47 pounds against a 1 kg spool at 2.2 lbs in the title, and the AMOLEN spec table reads Size 1KG against 800 g in total in the bullets. In each case the title and bullets are the figures to trust.
Buying guide: choosing the best 3d pla filament
Accuracy and diameter
Every spool here is 1.75 mm, and the accuracy figures run from +/- 0.02 mm to +/- 0.03 mm. The ELEGOO, AMOLEN and SUNLU spools state +/- 0.02 mm, while the eSUN and UJOYBIO spools state +/- 0.03 mm. None of the listings states how the maker measures the figure.
PLA and PLA+
3 spools here are plain PLA and 2 are PLA+. The eSUN listing states PLA+ has higher strength and better toughness than ordinary PLA, and the UJOYBIO listing states an optimized high-speed formula in plant-based PLA+. For plain prints the PLA spools do the job; for parts that take a knock, the PLA+ listings state the tougher material.
Spool size and bundles
Spool sizes here run from 0.2 kg per spool in the UJOYBIO bundle to 1 kg spools from ELEGOO, eSUN and SUNLU, with the AMOLEN bundle at 200 g per spool and 800 g in total. A bundle suits small multicolor prints, while a 1 kg spool suits longer prints in one color. Check the total weight, not just the spool count, before you buy.
Print settings
Only the UJOYBIO listing states nozzle, bed and speed settings: a nozzle temperature of 205-220°C, a bed temperature of 55-65°C and a speed of 200-400 mm/s. The other listings state no temperatures or speeds, so start from your printer manual and the settings on the spool you buy.
Drying and storage
Moisture is the reason the listings seal their spools: ELEGOO dries its filament and vacuum seals it, and eSUN dries for 24 hours and seals it in a vacuum bag with a desiccant bag. UJOYBIO vacuum seals each spool. Store opened spools dry, and keep the desiccant bag with the spool.
Print in a ventilated space and keep the printer clear of flammable material. Follow the nozzle and bed temperatures the listing states for each spool, and store filament dry so it does not pick up moisture.
Project Match
- Small multicolor models: UJOYBIO Elite PLA+ with 20 colors, or AMOLEN Silk Rainbow with 4 silk colors.
- Everyday black prints: ELEGOO PLA Black or SUNLU PLA Black, 1 kg spools at 1.75 mm.
- Tougher functional parts: eSUN PLA+ Pine Green or UJOYBIO Elite PLA+, the PLA+ listings here.
- High-speed printing: UJOYBIO Elite PLA+, the only listing with nozzle, bed and speed settings stated.
- Arts, crafts and DIY: AMOLEN Silk Rainbow, listed for arts, crafts and DIY.
How the scores add up
Each spool is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a safety listing or a warranty term, so every spool scores zero on safety and warranty; the ranking comes from performance, build and value.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| UJOYBIO Elite PLA+ | 9.7 | 32 | 21 | 22 | n/a | 0 |
| eSUN PLA+ Pine Green | 9.6 | 30 | 21 | 21 | n/a | 0 |
| ELEGOO PLA Black | 9.6 | 29 | 21 | 21 | n/a | 0 |
| AMOLEN Silk Rainbow | 9.6 | 28 | 20 | 20 | n/a | 0 |
HQ Scores live on a 9.2 to 9.8 band: each machine’s weighted point total is projected onto it proportionally, and higher totals always show higher. An unpowered accessory whose listing names no safety feature is scored without safety, out of 90.
FAQ: lasers and CNC
What is the best pla filament?
It depends on the print. The UJOYBIO bundle leads this guide with 20 colors, 4 kg in total and full print settings stated, while the eSUN PLA+ suits tougher parts and the ELEGOO black spool suits everyday prints. Match the spool to the print, not the brand.
What is ultra pla filament?
None of the listings here uses the name Ultra PLA. The listings here name plain PLA, silk PLA and PLA+, and the PLA+ listings state higher strength and better toughness than ordinary PLA. If a listing names Ultra PLA, read its own accuracy and settings before you buy.
What diameter PLA filament do these spools use?
All 5 spools are 1.75 mm. The accuracy figures are +/- 0.02 mm on 3 spools and +/- 0.03 mm on 2 spools. Check your printer takes 1.75 mm filament before you buy.
How much filament is in a bundle?
It varies. The UJOYBIO bundle is 4 kg in total across 20 spools at 0.2 kg each, and the AMOLEN bundle is 800 g in total across 4 spools at 200 g each. The other 3 spools are single 1 kg spools. Check the total weight on the listing, not just the spool count.
Do I need to dry PLA filament?
The listings that state drying do it before packaging: ELEGOO dries its filament and vacuum seals it, and eSUN dries for 24 hours and seals it in a vacuum bag with a desiccant bag. UJOYBIO vacuum seals each spool. Store opened spools dry so the filament does not pick up moisture.
Related: the 3D printers hub, 3D printer filament types, how to dry filament, and best PLA+ filament.




