Best Drill Bit for Marble (2026): 5 Sets Compared
Five diamond and carbide drill bit sets for marble, stone, glass and tile, compared by stated sizes, shanks, cooling and storage.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDECKRKAT 7-Pc Diamond9.7/10View on Amazon - 2
Best Carbide SetBosch PTBX05 Carbide9.6/10View on Amazon - 3
Best 5-Piece DiamondDKIBBITH Diamond 5-Pc9.6/10View on Amazon - 4
Best Single SizeEXFEIN Carbide 6mm9.6/10View on Amazon - 5
Best Masonry RangeDKIBBITH Masonry 10-Pc9.5/10View on Amazon
A marble cheese board, a stone sign or a glass ornament all start with a clean hole, and the best drill bit for marble is the bit that cuts that hole without chipping the edge. The sets below cover diamond and carbide bits in a range of sizes, with round, hex and triangle shanks, compared by stated sizes, cooling and fit.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall DECKRKAT 7-Pc Diamond: 7 pieces in 5 sizes with wax coolant, depth marks and a storage case Check price on Amazon
- Best Carbide Set Bosch PTBX05 Carbide: Carbide bits with hex shanks and an arrow head, in 3/16, 1/4 and 5/16 in sizes Check price on Amazon
- Best 5-Piece Diamond DKIBBITH Diamond 5-Pc: 5 diamond bits from 1/4 to 1/2 in with wax lubricant and a storage case Check price on Amazon
- Best Single Size EXFEIN Carbide 6mm: 10 carbide bits at 6 mm with a 54 mm working depth and hex shanks Check price on Amazon
- Best Masonry Range DKIBBITH Masonry 10-Pc: 10 bits from 1/8 to 1/2 in with a triangle shank for tile, glass and marble Check price on Amazon
Machines on the list

7 Piece Diamond Drill Bits Set
A 7-piece diamond set in 5 sizes with a wax lubricant, a coolant system and a storage case, for marble, stone, glass and tile.
Pros
- Seven pieces in 5 sizes, with two each of the 3/16 and 1/4 in bits
- Vacuum brazed diamond for precise, clean drilling in marble and stone
- Wax lubricant and a coolant system keep the bit cool while drilling
- Depth mark on the side for precise drilling, with a storage case
Cons
- Not for wood, so wood drilling needs another bit
- Maker recommends pausing to cool the bit after each hole
- Round shank, where the Bosch and EXFEIN sets use hex shanks
- No warranty term is stated

Bosch PTBX05 5 pc. Porcelain Tile Drill Bit Set
A 5-piece carbide set with hex shanks and an arrow-shaped head, for porcelain, marble, granite and ceramic tile.
Pros
- Carbide tip the maker claims gives up to 5X more life than Bosch glass and tile bits
- Hex shank for maximum torque transmission and a firm chuck connection
- Enhanced centering zone for easier, more precise handling
- Fits 1/4 hex impact drill/drivers and 3-jaw chuck drill/drivers
Cons
- Three sizes only: 3/16, 1/4 and 5/16 in
- No storage case is included
- No warranty term is stated
- Carbide bits where the DKIBBITH and DECKRKAT sets use diamond coating

Dry Diamond Drill Bits Set
A 5-piece dry diamond set from 1/4 to 1/2 in with wax lubricant, a depth mark and a storage case.
Pros
- Diamond coating for clean holes in marble, granite, stone and glass
- Wax lubricant inside melts while drilling and cools the cutting surface
- Side flutes remove debris and drill holes smooth and fast
- Depth mark for precise work, with a portable storage case
Cons
- Only 4 sizes across 5 pieces
- Round shank, where the Bosch and EXFEIN sets use hex shanks
- Smallest size is 1/4 in, so smaller holes need another set
- Five pieces where the DECKRKAT set has 7

EXFEIN Carbide Drill Bits 6mm 10pcs for Drilling
Ten carbide bits at 6 mm with a 90 mm length and a 54 mm working depth, for ceramic, porcelain, tile, marble and granite.
Pros
- Ten identical 6 mm bits in one pack
- 90 mm total length with a 54 mm working depth
- Quick-fit hex shank for stable clamping
- Maker gives a hand drill speed of 2000 to 5000 RPM
Cons
- One size only: 6 mm, so other hole sizes need another set
- Not for impact or hammer mode
- No storage case is included
- 54 mm working depth limits hole depth

10-Piece Masonry Drill Bit Set for Concrete Tile
A 10-piece masonry set from 1/8 to 1/2 in with a tungsten carbide head and a triangle shank, for tile, ceramic, concrete, glass and marble.
Pros
- Ten pieces across 7 sizes, from 1/8 to 1/2 in, with four 1/4 in bits
- Tungsten carbide alloy head for high wear resistance
- U-type slot for fast penetration and debris evacuation
- Anti-slip triangle shank for a tight fit in electric, hand and bench drills
Cons
- Not suitable for impact drills
- Masonry bits, not diamond-coated, for the hardest stone
- Maker recommends low speed for these bits
- No storage case is included
Other machines to compare
Greywolf 10 pcs Diamond Drill bit SetCheck price on Amazon
Larouoba 10pc 1/4” Black Ceramic Tile Drill BitCheck price on Amazon
Tolvaxo 10Pcs Dry Diamond Drill Bit Set for TileCheck price on Amazon
FOCSTOL Serrated Masonry Drill Bit Set 10pcsCheck price on Amazon
ZOMIYU 8Pcs Dry Diamond Drill Bit SetCheck price on Amazon
Specs compared
| Drill Bit | HQ Score | Pieces | Sizes | Shank | Cooling | Warranty |
|---|---|---|---|---|---|---|
| DECKRKAT 7-Pc Diamond | 9.7/10 | 7 | 3/16 to 1/2 in | Round | Wax lubricant, coolant system | Not stated |
| Bosch PTBX05 Carbide | 9.6/10 | 5 | 3/16, 1/4, 5/16 in | Hex | Not stated | Not stated |
| DKIBBITH Diamond 5-Pc | 9.6/10 | 5 | 1/4 to 1/2 in | Round | Wax lubricant | Not stated |
| EXFEIN Carbide 6mm | 9.6/10 | 10 | 6 mm | Hex | Not stated | Not stated |
| DKIBBITH Masonry 10-Pc | 9.5/10 | 10 | 1/8 to 1/2 in | Triangle | Not stated | Not stated |
Size and performance figures are the brand’s ratings quoted from listings on 20 November 2026.
Diamond or carbide for marble
Two of the sets here use a diamond coating, and three use carbide. The diamond sets carry a wax lubricant inside the bit, which melts while drilling and cools the cutting surface. The carbide sets use a tungsten carbide head or carbide tip, and the Bosch tip is the one the maker rates for up to 5X more life than Bosch glass and tile bits. Both types name marble among the materials they drill, so the choice turns on size range, shank and cooling.
Buying guide: the best drill bit for marble
Match the bit to the material
Marble, granite and stone suit the diamond sets, which name all three among the materials they drill. Tile and ceramic suit every set here, since each one names tile and ceramic. Concrete, plastic and brick appear only in the masonry set, so a maker who drills those as well as marble should start there. The EXFEIN pack drills tile, porcelain, granite, ceramic, glass and marble at one size, 6 mm.
Size range and shank fit
Size range runs from 1/8 in to 1/2 in across the sets here. The masonry set covers 7 sizes in that range, the DECKRKAT set covers 5 sizes from 3/16 to 1/2 in, and the Bosch set covers 3 sizes from 3/16 to 5/16 in. Shanks differ too: round on the diamond sets, hex on the Bosch and EXFEIN sets, and triangle on the masonry set. Check the chuck before ordering, and see the guide to drill bit shank types for fit.
Cooling and depth
Cooling matters on marble. The diamond sets carry a wax lubricant inside the bit, which melts while drilling and cools the cutting surface, and water can be used as additional cooling on the DKIBBITH set. The DECKRKAT maker recommends pausing and cooling the bit after each hole. Depth marks on the diamond sets help with precise work; see the diamond bit drill tips for clean holes.
What comes in the case
Two sets arrive in a storage case: the DKIBBITH diamond set in a portable case and the DECKRKAT set in a storage case. The Bosch, EXFEIN and masonry sets include no case, so plan a place to keep the bits. Count the pieces too: the masonry and EXFEIN sets hold 10 pieces, the DECKRKAT set holds 7, and the Bosch and DKIBBITH diamond sets hold 5 each.
Drilling marble throws chips and dust, so wear eye protection. Pause and cool the bit after each hole, and use water as additional cooling where the maker allows it. Never use impact or hammer mode on bits the maker says are not for it.
Project Match
- Marble cheese boards and stone signs: the DECKRKAT set, with 5 sizes from 3/16 to 1/2 in and a depth mark.
- Glass ornaments and tile work: the DKIBBITH diamond set, for porcelain, ceramic, granite, marble, stone and glass.
- One size drilled again and again: the EXFEIN pack, with 10 bits at 6 mm.
- Tile, concrete and brick as well as marble: the DKIBBITH masonry set, from 1/8 to 1/2 in.
- Porcelain and marble tile: the Bosch set, with carbide bits in 3/16, 1/4 and 5/16 in.
How the scores add up
Each drill bit set is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. For drill bits, safety would mean a stated guard, eye protection rating or certification, and none of the five listings names one, so no safety points were given. None of the five listings states a warranty term. A spec the maker does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DECKRKAT 7-Pc Diamond | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Bosch PTBX05 Carbide | 9.6 | 30 | 22 | 20 | n/a | 0 |
| DKIBBITH Diamond 5-Pc | 9.6 | 30 | 21 | 20 | n/a | 0 |
| EXFEIN Carbide 6mm | 9.6 | 28 | 20 | 21 | n/a | 0 |
| DKIBBITH Masonry 10-Pc | 9.5 | 27 | 19 | 21 | n/a | 0 |
We translate weighted points into a score with 9.2 as its floor and 9.8 as its cap; the straight-line conversion keeps the ranking exactly. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What size drill bit do I need for marble?
Match the bit to the hole. The sets here run from 1/8 in to 1/2 in, and the EXFEIN pack drills 6 mm holes. The DECKRKAT set covers 3/16 to 1/2 in in one pack.
Can I drill marble dry?
Yes, with a dry diamond bit. The DKIBBITH and DECKRKAT bits carry a wax lubricant inside that melts while drilling and cools the cutting surface, and water can be used as additional cooling on the DKIBBITH set. The DECKRKAT maker recommends pausing and cooling the bit after each hole.
Do these bits fit a hand drill?
The DKIBBITH diamond and masonry sets fit hand drills and bench drills. The DECKRKAT and EXFEIN sets fit electric drills, angle grinders and bench drills. The Bosch set fits 1/4 hex impact drill/drivers and 3-jaw chuck drill/drivers.
Can I use these drill bits on wood?
The DECKRKAT maker states its set is not for wood. Use a wood bit for wood, and keep these sets for the hard materials each one names: tile, ceramic, glass, marble, granite, stone, concrete and masonry.
Related: CNC tooling, best drill bit for tiles, best diamond tip drill bit set, best engraving pen for stone and types of drill bits.




