Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Drill Bit for Tiles (2026): 5 Picks for Tile, Porcelain and Glass

Carbide and diamond drill bit sets for tile, porcelain, ceramic, glass and stone, compared by sizes, shank, cooling and case.

Best Drill Bit for Tiles (2026): 5 Picks for Tile, Porcelain and Glass
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1DECKRKAT Diamond 10-PcBest OverallDECKRKAT Diamond 10-Pc9.6/10View on Amazon
  2. 2TITGGI Masonry 10-PcBest Carbide SetTITGGI Masonry 10-Pc9.6/10View on Amazon
  3. 3DYRECELVE Masonry 12-PcBest for Spare BitsDYRECELVE Masonry 12-Pc9.6/10View on Amazon
  4. 4Tavire Diamond 6-Pc SetBest for PorcelainTavire Diamond 6-Pc Set9.5/10View on Amazon
  5. 5DKIBBITH Diamond 7-PcBest Small Diamond SetDKIBBITH Diamond 7-Pc9.5/10View on Amazon

A tile job lives or dies on the hole you drill. A bit that wanders across glazed tile leaves a mark that no grout can hide, and a bit that binds halfway through can crack the tile it was meant to carry. This guide compares the best drill bit for tiles across carbide and diamond sets, so the bit matches the tile, the drill and the job at hand.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Quick picks

  • Best Overall DECKRKAT Diamond 10-Pc: 10 dry diamond bits from 3/16 to 1/2 in, with wax lubricant inside, side flutes and a depth mark, in a storage case. Check price on Amazon
  • Best Carbide Set TITGGI Masonry 10-Pc: 10 tungsten carbide bits in 7 sizes, with dual U-groove flutes, a 3-flat anti-slip shank and a storage case. Check price on Amazon
  • Best for Spare Bits DYRECELVE Masonry 12-Pc: 12 carbide bits in 7 sizes with marked sizes, 4 spare 1/4 in bits and a transparent storage case. Check price on Amazon
  • Best for Porcelain Tavire Diamond 6-Pc Set: Diamond bits with a hex shank and cooling wax inside, rated for up to 50-80 uses per bit. Check price on Amazon
  • Best Small Diamond Set DKIBBITH Diamond 7-Pc: 7 dry diamond bits with wax lubricant, side flutes and a depth mark, in a heavy-duty case. Check price on Amazon

Machines on the list

DECKRKAT 10-Piece Dry Diamond Drill Bits

DECKRKAT 10-Piece Dry Diamond Drill Bits

DECKRKAT9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece dry diamond drill bit set with a round shank, wax lubricant, side flutes and a depth mark, in a storage case.

Pros

  • 10 bits from 3/16 to 1/2 in, with extra 1/4 in bits for repeat holes
  • Vacuum brazed diamond for precise, clean drilling in tile, porcelain, granite and marble
  • Wax lubricant and an integrated coolant system keep the bit cool and dry
  • Side flute removes debris quickly, with a depth mark for precise drilling

Cons

  • Not for wood
  • 5/16 in, 3/8 in and 1/2 in bits with no spares at those sizes
  • Needs a cooling pause after each hole
  • Round shank without flat sides for anti-slip grip
10-Piece Masonry Drill Bit Set & Concrete Drill

10-Piece Masonry Drill Bit Set & Concrete Drill

TITGGI9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-piece tungsten carbide masonry set in 7 sizes from 1/8 to 1/2 in, with dual U-groove flutes and a 3-flat anti-slip shank, in a storage case.

Pros

  • Tungsten carbide tip cuts tile, ceramic, glass, brick and cement
  • 10 bits in 7 sizes, with 4 extra 1/4 in bits as spares
  • Dual U-groove flutes clear debris quickly and reduce clogging
  • 3-flat anti-slip shank fits standard keyed or keyless 3-jaw chucks

Cons

  • Rotary mode only, not for hammer drills, impact drivers or SDS rotary hammers
  • No warranty term is stated
  • Porcelain is not among the surfaces the maker names
  • 1/2 in bit with no spare at the largest size
DYRECELVE 12-Piece Masonry Drill Bit Set

DYRECELVE 12-Piece Masonry Drill Bit Set

DYRECELVE9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 12-piece carbide masonry set in 7 sizes from 1/8 to 1/2 in, with marked sizes and a transparent storage case.

Pros

  • 12 bits in 7 sizes, with 4 spare 1/4 in bits for repeat holes
  • Spear-shaped carbide tip with spiral flutes for brick, concrete, ceramic tile, glass, wood and plastic
  • Visible size markings make each diameter easy to identify
  • Transparent storage case keeps all 12 bits together for transport and storage

Cons

  • Not for SDS rotary hammers or 1/4-inch impact-driver collets
  • No warranty term is stated
  • 1/2 in and 3/8 in bits with no spares at those sizes
  • Carbide tip rather than diamond for the hardest stone and porcelain
6 Pcs Dry Diamond Drill Bit Set

6 Pcs Dry Diamond Drill Bit Set

Tavire9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A dry diamond drill bit set with a hex shank and cooling wax inside, for porcelain, tile, ceramic, granite, marble, concrete, masonry and glass.

Pros

  • Diamond bits for porcelain, tile, ceramic, granite, marble, concrete, masonry and glass
  • Hex shank for anti-slip grip and torque transfer
  • Cooling wax inside; dry drilling capable, with wetting for better performance
  • Rated for up to 50-80 uses per bit

Cons

  • No 1/8 in or 3/16 in bit for small pilot holes
  • 1/2 in bit with no spare at the largest size
  • Needs wetting for best performance and longer life
  • Diamond bits wear with use, so heavy use wears through the set
DKIBBITH 7 Pack Dry Diamond Drill Bits & Tile

DKIBBITH 7 Pack Dry Diamond Drill Bits & Tile

DKIBBITH9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7-piece dry diamond drill bit set with a round shank, wax lubricant, side flutes and a depth mark, in a heavy-duty case.

Pros

  • Vacuum brazed diamond for clean holes in tile, porcelain, granite and ceramic
  • Wax lubricant inside melts to cool the bit tip and prevent diamond loss
  • Side flutes remove debris faster, with a depth mark for control
  • Round shank fits electric drills, angle grinders and bench drills

Cons

  • A standard drill bit sits alongside the diamond bits in this set
  • 3/16 in and 5/16 in bits with no spares at those sizes
  • Needs a cooling pause after each hole
  • Round shank without flat sides for anti-slip grip

Other machines to compare

Specs compared

Model Bit type Sizes Shank Cooling Case
DECKRKAT Diamond 10-Pc Dry diamond 3/16 in to 1/2 in Round Wax lubricant inside Storage case
TITGGI Masonry 10-Pc Tungsten carbide 1/8 in to 1/2 in 3-flat Water cooling Storage case
DYRECELVE Masonry 12-Pc Carbide tip 1/8 in to 1/2 in 3-flat Water on hard surfaces Transparent case
Tavire Diamond 6-Pc Set Diamond and carbide 1/4 in to 1/2 in Hex Cooling wax inside Not stated
DKIBBITH Diamond 7-Pc Dry diamond 3/16 in to 1/2 in Round Wax lubricant inside Heavy-duty case

We give each product’s specs as its manufacturer rates them; listings read 15 November 2026.

Best drill bit for tiles: what the listings show

Carbide and diamond take different routes to the same hole. The carbide sets here use a tungsten carbide tip to cut tile, ceramic, glass, brick and cement, while the diamond sets use vacuum brazed diamond to cut porcelain, granite, marble and stone. Porcelain and granite sit at the hard end of the range, so a diamond set is the natural match there, and a carbide set covers ordinary wall tile, ceramic pots and brick.

Shank shape decides whether the bit stays put. A hex shank gives grip and torque transfer, a 3-flat shank resists slipping in a standard chuck, and the round-shank diamond sets fit electric drills, angle grinders and bench drills. Check the shank against the chuck on the drill you own before ordering, since a shank that does not fit is a set that stays in the case.

Cooling is the other split. The carbide sets call for water cooling and a slow start with light pressure, while the diamond sets carry wax lubricant inside the bit and drill dry, with a pause to cool after each hole. Wetting the diamond bits gives better performance and longer life, according to the maker of the hex-shank set.

Buying guide: drill bits for tile

Match the bit to the tile

Start from the tile in front of you. Glazed ceramic and ordinary wall tile suit a carbide tip, while porcelain, granite and marble call for diamond. Glass needs a slow start, light pressure and water cooling, and painter’s tape on the surface helps stop the bit from slipping, according to the carbide set makers. Check the surfaces each listing names before ordering, since no set here claims every material.

Shank and drill fit

The sets here fit standard keyed or keyless 3-jaw chucks on corded and cordless drills, and some also fit drill presses. The carbide sets use rotary mode only, and are not for hammer drills, impact drivers or SDS rotary hammers, so a hammer drill stays in the toolbox for this job. A bit that fits the chuck and the mode is a bit that drills true.

Cooling and pace

Tile drilling rewards patience. Start at low speed with light pressure, let the bit cool between holes, and add water on hard surfaces. The diamond sets drill dry thanks to the wax inside, but the makers still advise a cooling pause after each hole, and wetting the bits gives better performance and longer life. Rushing the cut builds heat, and heat is what dulls a bit and cracks a tile.

Sizes and spares

Most holes in tile are for wall anchors, grab bars, mirrors and shelves, and the sets here run from 1/8 in to 1/2 in. The common 1/4 in size appears in every set, and several sets carry extra 1/4 in bits as spares, so a worn bit does not end the job. A set that tops out at 1/2 in covers the usual mounting work, while the smallest sizes suit pilot holes and step-up drilling.

Project Match

Pair the project with the pick:

  • Bathroom tile and grab bars: TITGGI Masonry 10-Pc, with tape, water cooling and a slow start.
  • Kitchen tile and mirrors: DYRECELVE Masonry 12-Pc, with marked sizes for quick selection.
  • Porcelain and granite: Tavire Diamond 6-Pc Set, with a hex shank and cooling wax.
  • Porcelain, marble and glass: DKIBBITH Diamond 7-Pc, with a depth mark for control.
  • Stone, masonry and glass: DECKRKAT Diamond 10-Pc, with side flutes and a depth mark.

How the scores add up

Each set is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.

Product HQ Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
DECKRKAT Diamond 10-Pc 9.6 30 21 21 6 0
TITGGI Masonry 10-Pc 9.6 30 21 20 6 0
DYRECELVE Masonry 12-Pc 9.6 29 21 21 5 0
Tavire Diamond 6-Pc Set 9.5 29 19 19 6 0
DKIBBITH Diamond 7-Pc 9.5 28 20 19 5 0

Point totals are scaled so the weakest reads 9.2 and the strongest 9.8, with everything between kept in order.

FAQ: lasers and CNC

Can I use a masonry bit on porcelain tile?

Porcelain is harder than ordinary ceramic tile, so a diamond bit is the safer match. The diamond sets here name porcelain among their surfaces, while the carbide sets name tile, ceramic, glass, brick and cement. For porcelain, pick a diamond set and drill dry or wet as the maker advises.

Do I need water when drilling tile?

Water cooling helps on tile and glass, and the carbide set makers advise it to reduce chipping, along with a slow start and light pressure. The diamond sets carry wax lubricant inside and drill dry, with a cooling pause after each hole, though wetting the bits gives better performance and longer life.

Can I use these bits in a hammer drill?

No. The carbide sets state rotary mode only and are not for hammer drills, impact drivers or SDS rotary hammers, and the diamond sets fit standard electric drills, angle grinders and bench drills. Use rotary mode, start slow and let the bit do the work.

What size drill bit do I need for a wall anchor?

Match the bit to the anchor, not the other way round. The sets here run from 1/8 in to 1/2 in, and the 1/4 in size appears in every set, with extra 1/4 in bits in several sets for repeat holes. Check the anchor packaging for the hole size it needs, then pick the matching bit from the set.

Related: best diamond tip drill bit set, drill bit types for metal, best drill bits for hardened steel and end mill vs drill bit for CNC. Also see the best metal drill bit guide.

More buying guides