Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Drill Bit Material Types: HSS, Cobalt and Carbide

Drill bit material types decide which metals, wood and plastic a bit can cut, so match the material to the job.

Drill Bit Material Types: HSS, Cobalt and Carbide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Cobalt Drill Bit Set - 29Pcs M35 HSS Twist DrillCobalt Drill Bit Set - 29Pcs M35 HSS Twist Drill9.6/10View on Amazon
  2. 2MACXCOIP Metric 25Pcs(1.0mm-13.0mm)MACXCOIP Metric 25Pcs(1.0mm-13.0mm)9.6/10View on Amazon
  3. 3GMTOOLS 21Pcs Cobalt Drill Bits Set, M35 HSSGMTOOLS 21Pcs Cobalt Drill Bits Set, M35 HSS9.5/10View on Amazon
  4. 48 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm9.4/10View on Amazon

Drill bit material types decide which materials a bit can cut and how long the edge lasts. High speed steel, cobalt and carbide each suit different metals, wood and plastic. This guide explains what each material does and which sets cover the work in a small shop.

LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.

Cobalt Drill Bit Set - 29Pcs M35 HSS Twist Drill

Cobalt Drill Bit Set - 29Pcs M35 HSS Twist Drill

SEDIANAS9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29-piece M35 cobalt set from 1/16 inch to 1/2 inch, with a 135 degree split point and a metal index storage box.

Pros

  • 29 sizes from 1/16 inch to 1/2 inch
  • M35 cobalt with 5% cobalt, stated for heat resistance and hardness
  • 135 degree split point, self-centering to prevent walk-off
  • Fully ground twist design clears particles faster

Cons

  • No warranty term is stated
  • Inch sizes only, so a metric job needs another set
  • Largest size is 1/2 inch, so larger holes need another bit
  • Aimed at hard materials, so a wood-only job may not need cobalt
MACXCOIP Metric 25Pcs(1.0mm-13.0mm)

MACXCOIP Metric 25Pcs(1.0mm-13.0mm)

MACXCOIP9.6/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 25-piece metric M35 cobalt set from 1.0 mm to 13.0 mm, with a 135 degree point tip and a metal storage box.

Pros

  • 25 metric sizes from 1.0 mm to 13.0 mm
  • M35 cobalt for stainless steel, cast iron and copper
  • 135 degree point tip with twist design for faster cutting
  • Metal storage box with size indexes

Cons

  • No warranty term is stated
  • Not applicable to quenched bolts, per the maker
  • Metric sizes only, so an inch job needs another set
  • Largest size is 13.0 mm, so larger holes need another bit
GMTOOLS 21Pcs Cobalt Drill Bits Set, M35 HSS

GMTOOLS 21Pcs Cobalt Drill Bits Set, M35 HSS

GMTOOLS9.5/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 21-piece M35 cobalt set from 1/16 inch to 3/8 inch, with a 135 degree split point and a metal indexed storage case.

Pros

  • 21 sizes from 1/16 inch to 3/8 inch
  • M35 alloy with 5% cobalt for wear resistance and durability
  • 135 degree split point, self-centering with less pressure
  • 30-day money back from the maker

Cons

  • Largest size is 3/8 inch, so larger holes need another bit
  • Inch sizes only, so a metric job needs another set
  • 21 pieces, fewer sizes than the sets above
  • 30-day money-back term is a short window for a buyer who drills rarely
8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm

8 Pcs Titanium Coated HSS Twist Drill Bits,3-10mm

YKLP9.4/10 HQ Score
i
The HQ Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece titanium-coated HSS set from 3 mm to 10 mm, with a 135 degree split point and long flutes.

Pros

  • 8 sizes from 3 mm to 10 mm, the sizes the maker calls most common
  • Titanium coating keeps the edge sharper longer
  • 135 degree split point with straight shank prevents walking
  • Long flutes for efficient chip evacuation

Cons

  • Only 8 sizes, the fewest in this guide
  • Largest size is 10 mm, so larger holes need another bit
  • Stated for thin wood and thin iron sheet, so thick stock may need another bit
  • Serrated side cutting suits groove work, so a straight-hole buyer may not need it

What drill bit material types mean

A drill bit material is the steel or coating of the cutting edge. High speed steel is the common base for general drilling. Cobalt blends add hardness and heat resistance for hardened metals. The sets here cover high speed steel and M35 cobalt, and every set uses a 135 degree point.

High speed steel (HSS)

High speed steel is the base material for the YKLP set and for the cobalt blends below. The YKLP set coats its high speed steel with titanium, stated to keep the edge sharper longer and extend the life of standard drill bits by 2 times. The set covers 3 mm to 10 mm and suits thin wood, MDF, plastic board and aluminum.

Cobalt: M35 with 5% cobalt

M35 cobalt is high speed steel with 5% cobalt added, stated for heat resistance and greater hardness than ordinary drill bits. Each cobalt set here states a 135 degree point. Cobalt suits hardened metals: stainless steel, cast iron and titanium alloy for the SEDIANAS set, and hardened metal, cast iron and stainless steel for the GMTOOLS set. Size ranges differ: metric from 1.0 mm to 13.0 mm, and inch sizes up to 1/2 inch. The best drill bits for hardened steel guide compares cobalt sets for hard material.

Titanium coating and carbide

A titanium coating sits on top of high speed steel. The YKLP set is the coated set here, with 8 bits from 3 mm to 10 mm, and the maker states the coating keeps the edge sharper longer. Carbide is harder than high speed steel, but more brittle, so it suits rigid setups.

How to match the material to the job

Start with the material being drilled: stainless steel, cast iron and hardened metal call for M35 cobalt, while wood, plastic and soft metal work with high speed steel. Then match the size range: metric from 1.0 mm to 13.0 mm, and inch sizes from 1/16 inch to 1/2 inch.

The sets: HSS, cobalt and titanium-coated HSS

Size range and material decide the pick: match the set to the metal and the sizes the job needs.

FAQ: lasers and CNC

What is the difference between HSS and cobalt drill bits?

High speed steel suits general drilling in wood, plastic and soft metal. M35 cobalt is high speed steel with 5% cobalt added, stated for heat resistance and greater hardness in hardened metals.

Can cobalt drill bits cut stainless steel?

Yes. The MACXCOIP set covers stainless steel, iron castings, copper and aluminum, and the SEDIANAS and GMTOOLS sets cover stainless steel and cast iron.

What does M35 mean on a drill bit?

M35 is the grade name for a cobalt high speed steel with 5% cobalt in the mix. The grade suits tough, high tensile strength material, including stainless steel and titanium alloy.

What size range do I need for general drilling?

Match the range to the holes the job needs: 3 mm to 10 mm, 1.0 mm to 13.0 mm, or 1/16 inch to 1/2 inch.

Related: the CNC tooling hub, types of drill bits, drill bit shank types, best drill bits for hardened steel and best drill bits for CNC.

More buying guides

CNC Tooling ·

Drill Bit Types Chart and Uses Guide

A drill bit types chart groups fractional, letter, and numbered bits by size, so a maker can match the bit to the hole, the…

Engraving Materials ·

Types of Plastic Sheet Material for Engraving

Types of plastic sheet material for laser engraving explained by material, color layer, thickness and stated laser use, with sheet packs compared for signs,…