Best Engraving Pen for Stone (2026)
Five cordless engraving pens for stone, compared by speed, bits, surfaces and warranty, from what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallxTool Engraving Pen9.7/10View on Amazon - 2
Best Kit for BeginnersVQVYBXN Engraving Pen9.5/10View on Amazon - 3
Best Accessory KitUEOAKSSE Engraving Pen9.5/10View on Amazon - 4
Best Top SpeedCharming Carver Pen9.5/10View on Amazon - 5
Best Displayvueowcue Engraving Pen9.4/10View on Amazon
A stone keepsake starts as a plain slab, a tile or a garden rock, and the right pen turns it into a name, a date or a small piece of art. The best engraving pen for stone is the pen whose bits cut the material, whose speed control suits fine detail, and whose kit holds the pieces a maker actually uses. This guide compares cordless rotary pens for stone work by speed, bits, surfaces and warranty.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall xTool Engraving Pen: 12,000 to 25,000 RPM 5-speed motor, 160 gf·cm anti-twist torque, 24 diamond burrs and a 1 Year warranty. Check price on Amazon
- Best Kit for Beginners VQVYBXN Engraving Pen: 30 diamond bits, 12 grinding stone bits, 10 metal card blanks, 3 stencils and a 1 year warranty. Check price on Amazon
- Best Accessory Kit UEOAKSSE Engraving Pen: 60+ accessories, 3 speeds, overload protection and auto shut-off. Check price on Amazon
- Best Top Speed Charming Carver Pen: 5 speeds up to 28,000 RPM, 30 bits, 16 stencils and 4 practice materials. Check price on Amazon
- Best Display vueowcue Engraving Pen: LCD display showing battery life and speed, USB-C fast charging and 60+ surfaces. Check price on Amazon
Machines on the list

xTool Selected Precision Engraving Pen
A cordless 5-speed rotary pen with a 12,000 to 25,000 RPM motor, 160 gf·cm of anti-twist torque and a 42-in-1 kit for glass, ceramic and stone.
Pros
- 24 diamond burrs for glass, ceramic and stone in the 42-in-1 kit
- 12,000 to 25,000 RPM across 5 speeds, with a 5-bar speed indicator
- 160 gf·cm of anti-twist torque with a CNC-machined bearing and drive shaft
- 4 white LEDs around the tip light the work in low light
Cons
- No stated battery runtime; only pass-through charging is named
- Twist drills and saw blades in the kit suit thin wood and jewelry, not stone
- Top speed of 25,000 RPM sits below the 28,000 RPM top of the Charming Carver Pen
- No stencils or practice pieces are named in the kit

USB Engraving Pen with 47 bits,10Metal Business
A USB rechargeable pen with 3 speeds from 5,000 to 20,000 r/min, 30 diamond bits, 12 grinding stone bits and 10 metal card blanks.
Pros
- 30 diamond bits and 12 grinding stone bits cover engraving, carving and grinding
- 3 speeds from 5,000 to 20,000 r/min for different materials
- 10 metal card blanks and 3 stencils included for personalized cards
- Cordless use up to 30 minutes idling after a full charge
Cons
- Top speed of 20,000 r/min sits below the 28,000 RPM top of the Charming Carver Pen
- Cordless use is stated only as 30 minutes idling, with no working runtime named
- Only 3 speeds, against 5 speeds on the xTool, vueowcue and Charming Carver pens
- USB charging, not the USB-C fast charging named for the vueowcue pen

Electric Engraving Pen Set
A cordless 3-speed pen with 60+ accessories, overload protection, auto shut-off and an ergonomic grip for gifts and home decor.
Pros
- 60+ accessories including bits, stencils and practice blanks
- 3 speed settings for delicate work, fine glass etching and deep engraving on metal and stone
- Overload protection and auto shut-off for safer use
- Ergonomic balanced grip reduces hand fatigue
Cons
- No warranty term is stated
- No RPM figures are stated, so speeds cannot be compared
- 3 speeds against 5 speeds on three other pens here
- No separate bit count is stated within the 60+ accessories

Charming Carver Engraving Pen-Wood, Metal, Glass
A cordless 5-speed pen reaching 28,000 RPM, with 30 bits, 16 stencils, 4 practice materials and a Mastery Guide for 50+ surfaces.
Pros
- 28,000 RPM top speed, the highest stated here
- 30 bits for engraving, carving, grinding, polishing and etching
- 16 stencils and 4 practice materials with a Mastery Guide
- Works on metal, wood, glass, leather, stone, ceramics, plastic and mirrors
Cons
- Warranty is 30 days, less than the 1 year terms here
- No safety features are named in the listing
- No battery life or charging time is stated
- Only the 28,000 RPM top is stated, with no lower speeds named

vueowcue Cordless Engraving Pen with LCD Display
A cordless 5-speed pen with an LCD display, USB-C fast charging, a non-slip grip and 30+ replacement tips for 60+ surfaces.
Pros
- LCD display shows remaining battery life and current speed
- USB-C fast charging with a rechargeable cordless battery
- Non-slip rubberized grip holds firm, even with sweaty hands
- 60+ surfaces including wood, metal, glass, ceramic, stone and plastic
Cons
- No warranty term is stated
- No RPM figures are stated, so speeds cannot be compared
- No overload protection or shut-off is named
- Bit changes take 3 steps with the screw-lock collet
Other machines to compare
Electric Engraving Pen with 37 BitsCheck price on Amazon
HARDELL 24W Engraving PenCheck price on Amazon
HOTROSE Electric Engraving Pen with 37 BitsCheck price on Amazon
Kaibced Cordless Engraving Pen with 48 Kits & LED ScreenCheck price on Amazon
Specs compared
| Model | HQ Score | Speed | Bits in kit | Surfaces | Warranty |
|---|---|---|---|---|---|
| xTool Engraving Pen | 9.7/10 | 12,000 to 25,000 RPM, 5 speeds | 40 bits, 24 diamond burrs | 50+ surfaces | 1 Year |
| VQVYBXN Engraving Pen | 9.5/10 | 5,000 to 20,000 r/min, 3 speeds | 30 diamond bits, 12 grinding stone bits | Metal, ceramic, leather, wood, jewelry, stone, statue | 1 year |
| UEOAKSSE Engraving Pen | 9.5/10 | 3 speeds, RPM not stated | 60+ accessories | Wood, leather, glass, metal, stone | Not stated |
| Charming Carver Pen | 9.5/10 | Up to 28,000 RPM, 5 speeds | 30 bits | 50+ surfaces | 30 days |
| vueowcue Engraving Pen | 9.4/10 | 5 speeds, RPM not stated | 30 precision bits, 3 saw bits | 60+ surfaces | Not stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (19 November 2026).
What stone work asks of a pen
Diamond bits do the cutting on stone. The xTool kit holds 24 diamond burrs for glass, ceramic and stone, and the VQVYBXN kit holds 30 diamond bits with 12 grinding stone bits. For detail, three pens offer 5 speeds, while the VQVYBXN and UEOAKSSE pens offer 3 speeds. Only the VQVYBXN pen states a runtime, up to 30 minutes idling after a full charge. A light helps on dark stone: the xTool pen has a ring of 4 white LEDs, and the vueowcue pen shows battery life and speed on an LCD display.
Buying guide: best engraving pen for stone
Match the bit to the stone
Stone needs a hard bit. The xTool kit includes 24 diamond burrs for glass, ceramic and stone, and the VQVYBXN kit includes 30 diamond bits. The vueowcue kit includes a carbide burr, and the Charming Carver and UEOAKSSE kits name bits without naming the bit material. Check the kit list before ordering when stone is the main material.
Speed control for detail work
More speeds give finer control over delicate lines and deeper marks. The xTool pen runs 12,000 to 25,000 RPM across 5 speeds, the Charming Carver pen reaches 28,000 RPM across 5 speeds, and the vueowcue pen offers 5 speeds with no RPM figures stated. The VQVYBXN pen runs 5,000 to 20,000 r/min across 3 speeds, and the UEOAKSSE pen offers 3 speeds with no RPM figures stated. The xTool pen has a 5-bar speed indicator, and the vueowcue LCD shows the current speed.
Cordless runtime and charging
Every pen here is cordless and rechargeable. The VQVYBXN pen charges by USB and runs up to 30 minutes idling after a full charge. The vueowcue pen charges by USB-C fast charging, and the xTool pen supports pass-through use, so it can charge and engrave at the same time. The Charming Carver and UEOAKSSE pens state no battery life.
Bits, stencils and practice pieces
A kit saves a separate order. The UEOAKSSE kit holds 60+ accessories, the xTool kit is a 42-in-1 kit, and the VQVYBXN kit holds 30 diamond bits, 12 grinding stone bits, 10 metal card blanks and 3 stencils. The Charming Carver kit holds 30 bits, 16 stencils and 4 practice materials with a Mastery Guide, and the vueowcue kit holds 30 precision bits, 3 saw bits, practice materials and reusable stencils in a storage case.
Stone dust and small chips fly when a rotary bit meets stone. Wear eye protection and keep fingers clear of the spinning bit. Overload protection helps: the xTool pen stops the motor within 10 seconds under excessive resistance, and the UEOAKSSE pen has overload protection with auto shut-off.
Project Match
- Stone keepsakes with names and dates: xTool Engraving Pen, with 24 diamond burrs for stone and 5 speeds from 12,000 to 25,000 RPM.
- Personalized metal cards: VQVYBXN Engraving Pen, with 10 metal card blanks and 30 diamond bits.
- Beginner stone projects: Charming Carver Pen, with 16 stencils, 4 practice materials and a Mastery Guide.
- Gifts and home decor across materials: UEOAKSSE Engraving Pen, with 60+ accessories for wood, leather, glass, metal and stone.
- Work across rooms with a battery readout: vueowcue Engraving Pen, with an LCD display and USB-C fast charging.
How the scores add up
Each pen is scored out of 10 on performance, build, value, safety and warranty, with the weights published on the How We Pick page. A spec the listing does not publish scores nothing.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| xTool Engraving Pen | 9.7 | 32 | 22 | 20 | 7 | 2 |
| VQVYBXN Engraving Pen | 9.5 | 29 | 20 | 21 | 0 | 2 |
| UEOAKSSE Engraving Pen | 9.5 | 27 | 20 | 21 | 5 | 0 |
| Charming Carver Pen | 9.5 | 30 | 20 | 21 | 0 | 1 |
| vueowcue Engraving Pen | 9.4 | 27 | 21 | 20 | 0 | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total.
FAQ: lasers and CNC
What speed should I use to engrave stone?
Use the speed settings to match the material. The xTool pen runs 12,000 to 25,000 RPM across 5 speeds, the VQVYBXN pen runs 5,000 to 20,000 r/min across 3 speeds, and the Charming Carver pen reaches 28,000 RPM across 5 speeds. The vueowcue and UEOAKSSE pens state no RPM figures.
Which bits work on stone?
Diamond bits are the stated choice. The xTool kit holds 24 diamond burrs for glass, ceramic and stone, and the VQVYBXN kit holds 30 diamond bits with 12 grinding stone bits. The vueowcue kit holds a carbide burr.
Do these engraving pens need a cord?
No. Every pen here is cordless and rechargeable. The VQVYBXN pen charges by USB, the vueowcue pen charges by USB-C fast charging, and the xTool pen supports pass-through use.
How long does the battery last?
Only the VQVYBXN pen states a figure: cordless use up to 30 minutes idling after a full charge. The other four pens state no battery life.
Which of these pens state a warranty?
The VQVYBXN pen states 1 year of after-sale service, the xTool pen states a 1 Year warranty, and the Charming Carver pen states 30 days. The vueowcue and UEOAKSSE pens state no warranty term.
Related: best engraving pen, best engraving pen for metal, wood, glass and plastic, best engraving pen for carving, engraving pen for beginners and the CNC tooling hub. Also see the engraving pen vs laser engraver. Also see the best laser engraver for marble.




