Best Drill Bit for Glass Bottles (2026): 5 Picks for Bottle Projects
Five diamond drill bit sets for glass bottles, compared on size range, pilot bit, water cooling and the extras each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallYLYL 12-Piece Set9.7/10View on Amazon - 2
Most SizesSemderm 15-Piece9.7/10View on Amazon - 3
Best With Pilot BitDKIBBITH 5/8in 2-Pack9.6/10View on Amazon - 4
Best With CaseKATA 10-Piece Set9.6/10View on Amazon
Glass bottles turn into lamps, vases and planters once you can put a clean hole through the wall, and the drill bit decides whether the glass survives the job. This guide compares the best drill bit for glass bottles options for makers who drill bottles, judging each set on what its listing states: bit sizes, diamond grit, pilot bit, water cooling and what comes in the box.
LaserEngraveHQ earns a commission from purchases made through these links, at no extra cost to you. Read our affiliate disclosure.
Quick picks
- Best Overall YLYL 12-Piece Set: Twelve bits from 4 to 30 mm, nickel-plated steel, side slots for cooling water, and a shank for standard 3/8 in chucks. Check price on Amazon
- Most Sizes Semderm 15-Piece: Fifteen sizes from 1/4 to 2 inches, the most sizes here, in carbon steel with nickel plating. Check price on Amazon
- Best With Pilot Bit DKIBBITH 5/8in 2-Pack: Two 5/8 inch bits with a guiding pilot bit, a 1-3/8 inch cutting depth, and a total length of 2-1/2 inches. Check price on Amazon
- Best With Case KATA 10-Piece Set: Ten sizes from 1/4 to 1-1/5 inches in a plastic storage case, with sintered industrial diamond. Check price on Amazon
Machines on the list

12 Pcs Diamond Drill Bits, Hole Saw for Glass
A 12-piece diamond set from 4 to 30 mm, with nickel-plated carbon steel bodies, side slots for cooling water and a straight shank for standard 3/8 in drill chucks.
Pros
- Twelve bits from 4 to 30 mm, equal to 5/32 in to 1.18 in
- Side slots feed cooling water in and clear out chips
- Straight shank fits most standard 3/8 in drill chucks
- Diamond-coated tip grinds a smooth, burr-free circle
Cons
- No storage case is stated in the listing
- No warranty term is stated in the listing
- No pilot bit is stated for starting the hole
- Not for tempered glass, wood, metal or concrete

Diamond Drill bits, 15 PCS Diamond Hole Saw Drill
A 15-piece diamond hole saw set from 1/4 to 2 inches, with carbon steel bodies, smooth nickel plating and a hollow core for glass, ceramic and stone.
Pros
- Fifteen sizes from 1/4 to 2 inches, the most sizes here
- Hollow core coated with diamond for sharp, high precision cuts
- Carbon steel with smooth nickel plating to resist corrosion
- Covers glass, ceramic, bottles, pots, porcelain, marble and stone
Cons
- No storage case is stated in the listing
- No warranty term is stated in the listing
- No pilot bit is stated for starting the hole
- No shank size is stated for drill chucks

DKIBBITH 5/8" Diamond Hole-Saw Bits with Pilot
A 2-pack of 5/8 inch diamond hole saws with a guiding pilot bit, a 1-3/8 inch cutting depth and a total length of 2-1/2 inches.
Pros
- Guiding pilot bit for accurate, swift drilling
- Cutting depth of 1-3/8 inches for thicker materials
- Diamond height of 3/8 inch with a total length of 2-1/2 inches
- Removable pilot bit with a hex wrench for setup changes
Cons
- Only one size, 5/8 inch, with no other sizes in the pack
- Two bits only, so a worn bit leaves one spare
- No storage case is stated in the listing
- Setup changes need the included hex wrench

KATA 10PCS Diamond Drill Bit Set for Glass, Tile
A 10-piece diamond hole saw set from 1/4 to 1-1/5 inches in a plastic storage case, with sintered industrial diamond and a hollow design.
Pros
- Ten sizes from 1/4 to 1-1/5 inches in one set
- Plastic storage case keeps each hole saw organized
- Sintered industrial diamond edge for hard, brittle materials
- Hollow design reduces impact force to prevent cracking
Cons
- Warranty is stated only as Limited warranty, with no term
- No pilot bit is stated for starting the hole
- Not for wood, metal, concrete, brick or impact drilling
- Smallest size is 1/4 inch, so finer holes need another set

XIANFENGHU Diamond Drill Bits Set for Glass
A 10-piece diamond hole saw set from 1/8 to 11/16 inch for glass, tile and ceramic bottles, with industrial-grade diamond grit.
Pros
- Ten sizes from 1/8 to 11/16 inch, the finest small sizes here
- Industrial-grade diamond grit for long-lasting sharpness
- Diamond-coated edge for clean, burr-free holes
- Clamps into any standard power drill
Cons
- Largest size is 11/16 inch, so wider holes need another set
- No storage case is stated in the listing
- No pilot bit is stated for starting the hole
- No spare bits are included if one wears out
Specs compared
| Model | HQ Score | Pieces | Size range | Pilot bit | Case | Warranty |
|---|---|---|---|---|---|---|
| YLYL 12-Piece Set | 9.7/10 | 12 | 4-30 mm | Not stated | Not stated | None stated |
| Semderm 15-Piece | 9.7/10 | 15 | 1/4-2 in | Not stated | Not stated | None stated |
| DKIBBITH 5/8in 2-Pack | 9.6/10 | 2 | 5/8 in | Yes | Not stated | None stated |
| KATA 10-Piece Set | 9.6/10 | 10 | 1/4-1-1/5 in | Not stated | Plastic case | Limited, no term |
| XIANFENGHU 10-Piece | 9.6/10 | 10 | 1/8-11/16 in | Not stated | Not stated | None stated |
These numbers come straight from each maker’s listing and are rated, not measured by us (21 November 2026).
Buying guide: choosing the best drill bit for glass bottles
Diamond grit and hole size
All five sets cut with diamond, but the size ranges differ. The YLYL set runs from 4 to 30 mm, equal to 5/32 in to 1.18 in, and includes two 4 mm bits plus a bit near 1 inch for hanging and drainage holes. The Semderm set runs from 1/4 to 2 inches across 15 sizes, the widest count here. The KATA set runs from 1/4 to 1-1/5 inches in 10 sizes, and the XIANFENGHU set runs from 1/8 to 11/16 inch. The DKIBBITH pack holds a single size, 5/8 inch, so it suits repeated holes of one diameter rather than a range of jobs.
Pilot bit and starting angle
A pilot bit holds the hole saw in place while the cut starts. Only the DKIBBITH pack states one: a guiding pilot drill bit that is removable, with a hex wrench to modify the setup. The other sets rely on technique instead. The KATA and YLYL listings both say to start at a 45 degree angle, then slowly move upright, which keeps the bit from skating across smooth glass. A hollow diamond edge grinds a circular path instead of punching, so the glass gets a neat hole with clean edges and fewer cracks.
Water cooling and speed
Every listing here calls for water while drilling. The KATA, DKIBBITH, YLYL and Semderm listings all say to keep adding water, and the YLYL set adds side slots that feed cooling water in and clear out chips. Low speed and steady pressure help reduce heat and chipping, per the KATA listing, and the YLYL listing gives the same guidance. None of these bits is made for impact drilling, and the KATA and YLYL listings both say not to use them on wood, metal or concrete. The YLYL listing also excludes tempered glass.
What the set includes
The extras change what you still need to buy. The KATA set comes with a compact plastic storage case that keeps each hole saw organized. The DKIBBITH pack holds two 5/8 inch bits, while the other sets hold one of each size. The YLYL set includes two 4 mm bits, so the smallest size has a spare. Only the KATA listing states a storage case, so plan a case or a drawer for the sets that ship loose.
Use as directed. Keep the surface wet while drilling, start at 45 degrees, then bring the bit upright at a low speed with steady pressure. Do not use these bits for wood, metal, concrete or tempered glass, and never use impact drilling.
Project Match
- Bottle planters and drainage holes: YLYL 12-Piece Set, with a bit near 1 inch for hanging and drainage holes.
- Repeated holes of one size: DKIBBITH 5/8in 2-Pack, with a guiding pilot bit and a 1-3/8 in cutting depth.
- Widest size range in one box: Semderm 15-Piece, with 15 sizes from 1/4 to 2 inches.
- Tidy kit for the toolbox: KATA 10-Piece Set, with a plastic storage case.
- Small holes in bottles and jars: XIANFENGHU 10-Piece, with sizes from 1/8 to 11/16 inch.
How the scores add up
Each set is scored out of 10 on performance, build, value, safety and warranty. Drill bits have no electrical safety listing to state, so every set here scores zero on that criterion, and the ranking comes from the other four. No listing here states a warranty with a concrete term, so no set here carries a warranty score.
| Product | HQ Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| YLYL 12-Piece Set | 9.7 | 32 | 21 | 22 | n/a | 0 |
| Semderm 15-Piece | 9.7 | 32 | 21 | 21 | n/a | 0 |
| DKIBBITH 5/8in 2-Pack | 9.6 | 30 | 21 | 21 | n/a | 0 |
| KATA 10-Piece Set | 9.6 | 29 | 21 | 21 | n/a | 0 |
| XIANFENGHU 10-Piece | 9.6 | 28 | 20 | 20 | n/a | 0 |
Scores never fall under 9.2 or rise above 9.8. A machine’s spot between those limits is set purely by its point total. With no power and no stated safety feature, the safety row shows n/a and the score comes from 90 points.
FAQ: lasers and CNC
What size drill bit do I need for glass bottles?
It depends on the hole. The sets here run from 4 mm to 2 inches: the YLYL set covers 4 to 30 mm, the Semderm set covers 1/4 to 2 inches, and the DKIBBITH pack is a single 5/8 inch size. Pick the size that matches the fitting or the drainage hole you need, and check the stated range before ordering.
Can I use a regular drill bit on glass bottles?
No, these sets are diamond hole saws made for hard, smooth materials such as glass, ceramic, tile and stone. The KATA and YLYL listings both say the bits are not made for wood, metal or concrete, and the YLYL listing also excludes tempered glass. Use a diamond bit and keep the surface wet while drilling.
Do I need water when drilling glass?
Yes. Every listing here calls for water while drilling, and the YLYL set adds side slots that feed cooling water in and clear out chips. Water keeps the bit cool, reduces heat and chipping, and extends the life of the diamond edge, per the listings.
Will drilling crack a glass bottle?
It can, but the design and the technique lower the risk. The hollow diamond edge grinds a circular path instead of punching, and the KATA listing says the hollow design reduces the impact force that causes cracking. Start at 45 degrees, move upright slowly, use a low speed with steady pressure, and keep the surface wet.
How fast should I drill glass?
Use a low speed with steady pressure, per the KATA and YLYL listings. Start at 45 degrees, then bring the bit upright once the cut has started. Never use impact drilling on glass, and keep adding water while you drill.
Related: best drill bit for glass bottles, best drill bit for marble, best glass cutter tool, drill bit material types, and the best engraving pen for glass.




